Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=15289): Process ended prematurely: osmo-stp_10.42.42.5(pid=15289) [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15289)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 06:01:04.578575 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:01:04.590077 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 06:01:04.738188 tst cs_paging_gprs_active.py: using LAC 38895 06:01:04.870946 tst cs_paging_gprs_active.py: using RAC 135 06:01:04.997139 tst cs_paging_gprs_active.py: using CellId 38895 06:01:05.122549 tst cs_paging_gprs_active.py: using BVCI 38896 06:01:05.146631 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:01:05.157650 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:01:05.168318 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:01:05.179079 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:01:05.190116 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:01:05.201112 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:01:05.212411 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:01:05.223403 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:01:05.234574 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:01:05.356445 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:01:05.660352 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:01:05.801819 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:01:06.148672 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15279): Launched 06:01:06.436397 run iperf3-srv_10.42.42.10(pid=15280): Launched 06:01:06.643005 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:01:06.783648 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:01:07.131292 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15281): Launched 06:01:07.420114 run iperf3-srv_10.42.42.10(pid=15282): Launched 06:01:07.626537 tst cs_paging_gprs_active.py:38: start network... 06:01:07.767166 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:01:08.303283 run create_hlr_db(pid=15283): Launched 06:01:08.497524 bus /gobi_6: Setting Powered False 06:01:09.517799 run create_hlr_db(pid=15283): Terminated: ok {rc=0} 06:01:09.945137 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15285): Launched 06:01:10.262909 run osmo-hlr_10.42.42.2(pid=15286): Launched 06:01:10.387635 run osmo-stp_10.42.42.5: Starting osmo-stp 06:01:10.940914 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15288): Launched 06:01:11.257251 run osmo-stp_10.42.42.5(pid=15289): Launched 06:01:11.372241 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:01:11.920278 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15291): Launched 06:01:12.032627 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:01:12.306970 run patchelf(pid=15292): Launched 06:01:12.491473 run osmo-stp_10.42.42.5(pid=15289): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15289)] 06:01:12.626417 run osmo-stp_10.42.42.5(pid=15289): stdout: | (launched: 2022-12-14_06:01:11.100618) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:01:12.761625 run osmo-stp_10.42.42.5(pid=15289): stderr: | �[0;m�[38;5;43m20221214060111272 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214060111272 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214060111272 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214060111273 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214060111273 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214060111273 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214060111273 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:01:12.891525 run osmo-stp_10.42.42.5(pid=15289): stdout: | (launched: 2022-12-14_06:01:11.100618) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:01:13.020289 run osmo-stp_10.42.42.5(pid=15289): stderr: | �[0;m�[38;5;43m20221214060111272 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214060111272 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214060111272 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214060111273 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214060111273 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214060111273 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214060111273 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:01:13.171030 run patchelf(pid=15292): Terminating (SIGINT) 06:01:13.348325 run patchelf(pid=15292): Terminated: ok {rc=0} 06:01:13.380670 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15289): Process ended prematurely: osmo-stp_10.42.42.5(pid=15289) [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15289)] [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 06:01:13.390230 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 06:01:13.450422 run osmo-hlr_10.42.42.2(pid=15286): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15286)] 06:01:13.499468 run osmo-hlr_10.42.42.2(pid=15286): stdout: | (launched: 2022-12-14_06:01:10.106232) 06:01:13.549174 run osmo-hlr_10.42.42.2(pid=15286): stderr: | �[0;m�[1;31m20221214060110284 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214060110284 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214060110284 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214060110284 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214060110284 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214060110285 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214060110297 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214060110305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214060110305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214060110305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:01:13.591599 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15279): Terminating (SIGTERM) 06:01:13.631559 run iperf3-srv_10.42.42.10(pid=15280): Terminating (SIGTERM) 06:01:13.671675 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15281): Terminating (SIGTERM) 06:01:13.711731 run iperf3-srv_10.42.42.10(pid=15282): Terminating (SIGTERM) 06:01:13.751786 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15285): Terminating (SIGTERM) 06:01:13.791783 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15288): Terminating (SIGTERM) 06:01:13.831787 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15291): Terminating (SIGTERM) 06:01:13.840847 --- ParallelTerminationStrategy: PID 15279 died... 06:01:13.894874 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15279): Terminated: ok {rc=0} 06:01:13.904326 --- ParallelTerminationStrategy: PID 15280 died... 06:01:13.957975 run iperf3-srv_10.42.42.10(pid=15280): Terminated {rc=256} 06:01:13.967494 --- ParallelTerminationStrategy: PID 15281 died... 06:01:14.021140 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15281): Terminated: ok {rc=0} 06:01:14.030647 --- ParallelTerminationStrategy: PID 15282 died... 06:01:14.084208 run iperf3-srv_10.42.42.10(pid=15282): Terminated {rc=256} 06:01:14.093736 --- ParallelTerminationStrategy: PID 15285 died... 06:01:14.146944 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15285): Terminated: ok {rc=0} 06:01:14.156390 --- ParallelTerminationStrategy: PID 15288 died... 06:01:14.209665 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15288): Terminated: ok {rc=0} 06:01:14.219121 --- ParallelTerminationStrategy: PID 15291 died... 06:01:14.272727 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15291): Terminated: ok {rc=0} 06:01:14.361253 bus /gobi_0: Setting Powered False 06:01:15.463856 bus /gobi_0: Setting Powered False 06:01:16.569825 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15289): Process ended prematurely: osmo-stp_10.42.42.5(pid=15289) [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15289)]