Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=16278): Process ended prematurely: osmo-stp_10.42.42.5(pid=16278) [trial-2400↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16278)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 06:11:27.816001 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:11:27.827460 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 06:11:27.998181 tst cs_paging_gprs_active.py: using LAC 38949 06:11:28.127011 tst cs_paging_gprs_active.py: using RAC 189 06:11:28.254555 tst cs_paging_gprs_active.py: using CellId 38949 06:11:28.382486 tst cs_paging_gprs_active.py: using BVCI 38950 06:11:28.407812 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:11:28.419268 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:11:28.430473 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:11:28.441797 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:11:28.453007 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:11:28.464120 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:11:28.475460 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:11:28.486717 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:11:28.498260 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:11:28.618179 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:11:28.923971 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:11:29.063227 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:11:29.408650 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16268): Launched 06:11:29.695362 run iperf3-srv_10.42.42.10(pid=16269): Launched 06:11:29.899755 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:11:30.038875 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:11:30.385372 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16270): Launched 06:11:30.671406 run iperf3-srv_10.42.42.10(pid=16271): Launched 06:11:30.876839 tst cs_paging_gprs_active.py:38: start network... 06:11:31.018436 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:11:31.596673 run create_hlr_db(pid=16272): Launched 06:11:31.792290 bus /gobi_6: Setting Powered False 06:11:32.811998 run create_hlr_db(pid=16272): Terminated: ok {rc=0} 06:11:33.232343 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16274): Launched 06:11:33.546529 run osmo-hlr_10.42.42.2(pid=16275): Launched 06:11:33.670163 run osmo-stp_10.42.42.5: Starting osmo-stp 06:11:34.218507 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16277): Launched 06:11:34.530448 run osmo-stp_10.42.42.5(pid=16278): Launched 06:11:34.645241 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:11:35.188749 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16280): Launched 06:11:35.300263 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:11:35.575621 run patchelf(pid=16281): Launched 06:11:35.758459 run osmo-stp_10.42.42.5(pid=16278): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16278)] 06:11:35.892063 run osmo-stp_10.42.42.5(pid=16278): stdout: | (launched: 2022-12-14_06:11:34.376716) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:11:36.026470 run osmo-stp_10.42.42.5(pid=16278): stderr: | �[0;m�[38;5;43m20221214061134549 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214061134549 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214061134549 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214061134550 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214061134552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214061134552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214061134552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:11:36.155572 run osmo-stp_10.42.42.5(pid=16278): stdout: | (launched: 2022-12-14_06:11:34.376716) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:11:36.283567 run osmo-stp_10.42.42.5(pid=16278): stderr: | �[0;m�[38;5;43m20221214061134549 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214061134549 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214061134549 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214061134550 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214061134552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214061134552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214061134552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:11:36.432578 run patchelf(pid=16281): Terminating (SIGINT) 06:11:36.607902 run patchelf(pid=16281): Terminated: ok {rc=0} 06:11:36.640440 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16278): Process ended prematurely: osmo-stp_10.42.42.5(pid=16278) [trial-2400↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16278)] [trial-2400↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 06:11:36.649822 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 06:11:36.710536 run osmo-hlr_10.42.42.2(pid=16275): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16275)] 06:11:36.760122 run osmo-hlr_10.42.42.2(pid=16275): stdout: | (launched: 2022-12-14_06:11:33.391125) 06:11:36.810414 run osmo-hlr_10.42.42.2(pid=16275): stderr: | �[0;m�[1;31m20221214061133566 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214061133566 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214061133566 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214061133566 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214061133566 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214061133566 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214061133579 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214061133589 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214061133589 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214061133589 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:11:36.853322 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16268): Terminating (SIGTERM) 06:11:36.893358 run iperf3-srv_10.42.42.10(pid=16269): Terminating (SIGTERM) 06:11:36.933588 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16270): Terminating (SIGTERM) 06:11:36.973761 run iperf3-srv_10.42.42.10(pid=16271): Terminating (SIGTERM) 06:11:37.014003 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16274): Terminating (SIGTERM) 06:11:37.054239 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16277): Terminating (SIGTERM) 06:11:37.094575 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16280): Terminating (SIGTERM) 06:11:37.103966 --- ParallelTerminationStrategy: PID 16268 died... 06:11:37.158387 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16268): Terminated: ok {rc=0} 06:11:37.168053 --- ParallelTerminationStrategy: PID 16269 died... 06:11:37.222053 run iperf3-srv_10.42.42.10(pid=16269): Terminated {rc=256} 06:11:37.231672 --- ParallelTerminationStrategy: PID 16270 died... 06:11:37.285491 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16270): Terminated: ok {rc=0} 06:11:37.295005 --- ParallelTerminationStrategy: PID 16271 died... 06:11:37.348820 run iperf3-srv_10.42.42.10(pid=16271): Terminated {rc=256} 06:11:37.358460 --- ParallelTerminationStrategy: PID 16274 died... 06:11:37.412326 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16274): Terminated: ok {rc=0} 06:11:37.421987 --- ParallelTerminationStrategy: PID 16277 died... 06:11:37.475888 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16277): Terminated: ok {rc=0} 06:11:37.485855 --- ParallelTerminationStrategy: PID 16280 died... 06:11:37.540005 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16280): Terminated: ok {rc=0} 06:11:37.629089 bus /gobi_0: Setting Powered False 06:11:38.732050 bus /gobi_0: Setting Powered False 06:11:39.841036 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16278): Process ended prematurely: osmo-stp_10.42.42.5(pid=16278) [trial-2400↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16278)]