Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=21324): Process ended prematurely: osmo-stp_10.42.42.5(pid=21324) [trial-2401↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21324)]
Standard Output
---------------------------------------------- trial-2401 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 07:11:55.510694 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:11:55.521690 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:11:55.645301 tst cs_paging_gprs_active.py: using LAC 39263 07:11:55.767077 tst cs_paging_gprs_active.py: using RAC 248 07:11:55.886687 tst cs_paging_gprs_active.py: using CellId 39263 07:11:56.008383 tst cs_paging_gprs_active.py: using BVCI 39264 07:11:56.031615 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:11:56.042444 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:11:56.052879 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:11:56.063382 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:11:56.074015 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:11:56.084920 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:11:56.095977 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:11:56.106899 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:11:56.117870 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:11:56.240647 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:11:56.536911 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:11:56.673747 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:11:57.012460 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21314): Launched 07:11:57.293909 run iperf3-srv_10.42.42.10(pid=21315): Launched 07:11:57.494494 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:11:57.630931 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:11:57.970814 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21316): Launched 07:11:58.250708 run iperf3-srv_10.42.42.10(pid=21317): Launched 07:11:58.450749 tst cs_paging_gprs_active.py:38: start network... 07:11:58.587061 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:11:59.104136 run create_hlr_db(pid=21318): Launched 07:11:59.293973 bus /gobi_6: Setting Powered False 07:12:00.303719 run create_hlr_db(pid=21318): Terminated: ok {rc=0} 07:12:00.720720 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21320): Launched 07:12:01.142186 run osmo-hlr_10.42.42.2(pid=21321): Launched 07:12:01.403431 run osmo-stp_10.42.42.5: Starting osmo-stp 07:12:02.044188 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21323): Launched 07:12:02.445330 run osmo-stp_10.42.42.5(pid=21324): Launched 07:12:02.567117 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:12:03.143869 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21326): Launched 07:12:03.261352 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:12:03.548176 run patchelf(pid=21327): Launched 07:12:03.728871 run osmo-stp_10.42.42.5(pid=21324): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21324)] 07:12:03.861252 run osmo-stp_10.42.42.5(pid=21324): stdout: | (launched: 2022-12-14_07:12:02.228562) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:12:03.993424 run osmo-stp_10.42.42.5(pid=21324): stderr: | �[0;m�[38;5;43m20221214071202446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214071202446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214071202447 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214071202447 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214071202447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214071202448 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214071202448 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:12:04.121180 run osmo-stp_10.42.42.5(pid=21324): stdout: | (launched: 2022-12-14_07:12:02.228562) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:12:04.247321 run osmo-stp_10.42.42.5(pid=21324): stderr: | �[0;m�[38;5;43m20221214071202446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214071202446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214071202447 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214071202447 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214071202447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214071202448 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214071202448 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:12:04.395865 run patchelf(pid=21327): Terminating (SIGINT) 07:12:04.571160 run patchelf(pid=21327): Terminated: ok {rc=0} 07:12:04.603133 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21324): Process ended prematurely: osmo-stp_10.42.42.5(pid=21324) [trial-2401↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21324)] [trial-2401↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 07:12:04.612370 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 07:12:04.672807 run osmo-hlr_10.42.42.2(pid=21321): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21321)] 07:12:04.722367 run osmo-hlr_10.42.42.2(pid=21321): stdout: | (launched: 2022-12-14_07:12:00.877079) 07:12:04.772646 run osmo-hlr_10.42.42.2(pid=21321): stderr: | �[0;m�[1;31m20221214071201185 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214071201185 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214071201185 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214071201185 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214071201185 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214071201185 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214071201198 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214071201215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214071201216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214071201216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:12:04.815647 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21314): Terminating (SIGTERM) 07:12:04.855791 run iperf3-srv_10.42.42.10(pid=21315): Terminating (SIGTERM) 07:12:04.895954 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21316): Terminating (SIGTERM) 07:12:04.936112 run iperf3-srv_10.42.42.10(pid=21317): Terminating (SIGTERM) 07:12:04.976370 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21320): Terminating (SIGTERM) 07:12:05.016600 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21323): Terminating (SIGTERM) 07:12:05.057286 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21326): Terminating (SIGTERM) 07:12:05.066494 --- ParallelTerminationStrategy: PID 21314 died... 07:12:05.120091 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21314): Terminated: ok {rc=0} 07:12:05.129756 --- ParallelTerminationStrategy: PID 21315 died... 07:12:05.182967 run iperf3-srv_10.42.42.10(pid=21315): Terminated {rc=256} 07:12:05.192356 --- ParallelTerminationStrategy: PID 21316 died... 07:12:05.245276 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21316): Terminated: ok {rc=0} 07:12:05.254818 --- ParallelTerminationStrategy: PID 21317 died... 07:12:05.307840 run iperf3-srv_10.42.42.10(pid=21317): Terminated {rc=256} 07:12:05.317512 --- ParallelTerminationStrategy: PID 21320 died... 07:12:05.370617 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21320): Terminated: ok {rc=0} 07:12:05.380058 --- ParallelTerminationStrategy: PID 21323 died... 07:12:05.433562 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21323): Terminated: ok {rc=0} 07:12:05.443333 --- ParallelTerminationStrategy: PID 21326 died... 07:12:05.496802 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21326): Terminated: ok {rc=0} 07:12:05.585284 bus /gobi_0: Setting Powered False 07:12:06.692692 bus /gobi_0: Setting Powered False 07:12:07.804398 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21324): Process ended prematurely: osmo-stp_10.42.42.5(pid=21324) [trial-2401↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21324)]