Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=24240): Process ended prematurely: osmo-stp_10.42.42.5(pid=24240) [trial-2401↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24240)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 07:45:49.338861 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:45:49.349429 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 07:45:49.482306 tst cs_paging_gprs_active.py: using LAC 39442 07:45:49.599137 tst cs_paging_gprs_active.py: using RAC 172 07:45:49.715684 tst cs_paging_gprs_active.py: using CellId 39442 07:45:49.833726 tst cs_paging_gprs_active.py: using BVCI 39443 07:45:49.856513 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:45:49.867065 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:45:49.877421 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:45:49.887702 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:45:49.898435 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:45:49.909230 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:45:49.919653 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:45:49.930179 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 07:45:49.940593 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 07:45:50.062494 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 07:45:50.358040 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:45:50.493178 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:45:50.829155 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24226): Launched 07:45:51.108313 run iperf3-srv_10.42.42.10(pid=24227): Launched 07:45:51.302270 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:45:51.427723 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:45:51.742496 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24228): Launched 07:45:52.002768 run iperf3-srv_10.42.42.10(pid=24229): Launched 07:45:52.185258 tst cs_paging_gprs_active.py:38: start network... 07:45:52.309621 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:45:52.795509 run create_hlr_db(pid=24234): Launched 07:45:52.970190 bus /sierra_2: Setting Powered False 07:45:53.992830 run create_hlr_db(pid=24234): Terminated: ok {rc=0} 07:45:54.399216 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24236): Launched 07:45:54.704200 run osmo-hlr_10.42.42.2(pid=24237): Launched 07:45:54.824289 run osmo-stp_10.42.42.5: Starting osmo-stp 07:45:55.357990 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24239): Launched 07:45:55.664910 run osmo-stp_10.42.42.5(pid=24240): Launched 07:45:55.776418 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:45:56.311183 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24242): Launched 07:45:56.419285 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:45:56.687168 run patchelf(pid=24243): Launched 07:45:56.865440 run osmo-stp_10.42.42.5(pid=24240): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24240)] 07:45:56.995270 run osmo-stp_10.42.42.5(pid=24240): stdout: | (launched: 2022-12-14_07:45:55.512427) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:45:57.125137 run osmo-stp_10.42.42.5(pid=24240): stderr: | �[0;m�[38;5;43m20221214074555682 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214074555682 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214074555682 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214074555683 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214074555683 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214074555683 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214074555684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:45:57.250530 run osmo-stp_10.42.42.5(pid=24240): stdout: | (launched: 2022-12-14_07:45:55.512427) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:45:57.375192 run osmo-stp_10.42.42.5(pid=24240): stderr: | �[0;m�[38;5;43m20221214074555682 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214074555682 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214074555682 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214074555683 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214074555683 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214074555683 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214074555684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:45:57.521668 run patchelf(pid=24243): Terminating (SIGINT) 07:45:57.695081 run patchelf(pid=24243): Terminated: ok {rc=0} 07:45:57.726670 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24240): Process ended prematurely: osmo-stp_10.42.42.5(pid=24240) [trial-2401↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24240)] [trial-2401↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 07:45:57.735698 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 07:45:57.795354 run osmo-hlr_10.42.42.2(pid=24237): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24237)] 07:45:57.844099 run osmo-hlr_10.42.42.2(pid=24237): stdout: | (launched: 2022-12-14_07:45:54.553841) 07:45:57.893508 run osmo-hlr_10.42.42.2(pid=24237): stderr: | �[0;m�[1;31m20221214074554727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214074554727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214074554727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214074554727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214074554727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214074554728 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214074554738 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214074554746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214074554747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214074554747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:45:57.935725 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24226): Terminating (SIGTERM) 07:45:57.975276 run iperf3-srv_10.42.42.10(pid=24227): Terminating (SIGTERM) 07:45:58.014670 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24228): Terminating (SIGTERM) 07:45:58.053954 run iperf3-srv_10.42.42.10(pid=24229): Terminating (SIGTERM) 07:45:58.093366 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24236): Terminating (SIGTERM) 07:45:58.132692 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24239): Terminating (SIGTERM) 07:45:58.172568 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24242): Terminating (SIGTERM) 07:45:58.181758 --- ParallelTerminationStrategy: PID 24226 died... 07:45:58.234467 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24226): Terminated: ok {rc=0} 07:45:58.243921 --- ParallelTerminationStrategy: PID 24227 died... 07:45:58.296440 run iperf3-srv_10.42.42.10(pid=24227): Terminated {rc=256} 07:45:58.305899 --- ParallelTerminationStrategy: PID 24228 died... 07:45:58.358695 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24228): Terminated: ok {rc=0} 07:45:58.368101 --- ParallelTerminationStrategy: PID 24229 died... 07:45:58.420425 run iperf3-srv_10.42.42.10(pid=24229): Terminated {rc=256} 07:45:58.429894 --- ParallelTerminationStrategy: PID 24236 died... 07:45:58.482229 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24236): Terminated: ok {rc=0} 07:45:58.491659 --- ParallelTerminationStrategy: PID 24239 died... 07:45:58.544067 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24239): Terminated: ok {rc=0} 07:45:58.553598 --- ParallelTerminationStrategy: PID 24242 died... 07:45:58.606605 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24242): Terminated: ok {rc=0} 07:45:58.689714 bus /gobi_0: Setting Powered False 07:45:59.797098 bus /gobi_0: Setting Powered False 07:46:00.926415 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24240): Process ended prematurely: osmo-stp_10.42.42.5(pid=24240) [trial-2401↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24240)]