Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=22815): Process ended prematurely: osmo-stp_10.42.42.5(pid=22815) [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22815)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 07:29:34.499148 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:29:34.510702 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:29:34.659719 tst cs_paging_gprs_active.py: using LAC 39356 07:29:34.789628 tst cs_paging_gprs_active.py: using RAC 86 07:29:34.919424 tst cs_paging_gprs_active.py: using CellId 39356 07:29:35.048048 tst cs_paging_gprs_active.py: using BVCI 39357 07:29:35.073298 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:29:35.084613 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:29:35.095902 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:29:35.107107 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:29:35.118283 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:29:35.129760 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:29:35.141453 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:29:35.152769 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:29:35.164374 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:29:35.289683 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:29:35.590852 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:29:35.728519 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:29:36.070275 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22805): Launched 07:29:36.354025 run iperf3-srv_10.42.42.10(pid=22806): Launched 07:29:36.558686 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:29:36.697222 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:29:37.040282 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22807): Launched 07:29:37.326051 run iperf3-srv_10.42.42.10(pid=22808): Launched 07:29:37.529099 tst cs_paging_gprs_active.py:38: start network... 07:29:37.666703 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:29:38.185900 run create_hlr_db(pid=22809): Launched 07:29:38.377087 bus /gobi_6: Setting Powered False 07:29:39.398231 run create_hlr_db(pid=22809): Terminated: ok {rc=0} 07:29:39.838120 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22811): Launched 07:29:40.158037 run osmo-hlr_10.42.42.2(pid=22812): Launched 07:29:40.272300 run osmo-stp_10.42.42.5: Starting osmo-stp 07:29:40.810904 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22814): Launched 07:29:41.118132 run osmo-stp_10.42.42.5(pid=22815): Launched 07:29:41.232684 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:29:41.772194 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22817): Launched 07:29:41.883182 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:29:42.154078 run patchelf(pid=22818): Launched 07:29:42.335342 run osmo-stp_10.42.42.5(pid=22815): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22815)] 07:29:42.467437 run osmo-stp_10.42.42.5(pid=22815): stdout: | (launched: 2022-12-14_07:29:40.967158) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:29:42.599660 run osmo-stp_10.42.42.5(pid=22815): stderr: | �[0;m�[38;5;43m20221214072941135 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214072941135 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214072941136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214072941136 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214072941137 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214072941137 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214072941137 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:29:42.727685 run osmo-stp_10.42.42.5(pid=22815): stdout: | (launched: 2022-12-14_07:29:40.967158) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:29:42.854593 run osmo-stp_10.42.42.5(pid=22815): stderr: | �[0;m�[38;5;43m20221214072941135 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214072941135 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214072941136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214072941136 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214072941137 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214072941137 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214072941137 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:29:43.003268 run patchelf(pid=22818): Terminating (SIGINT) 07:29:43.179222 run patchelf(pid=22818): Terminated: ok {rc=0} 07:29:43.211287 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22815): Process ended prematurely: osmo-stp_10.42.42.5(pid=22815) [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22815)] [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 07:29:43.220453 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 07:29:43.279716 run osmo-hlr_10.42.42.2(pid=22812): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22812)] 07:29:43.328576 run osmo-hlr_10.42.42.2(pid=22812): stdout: | (launched: 2022-12-14_07:29:40.005228) 07:29:43.377821 run osmo-hlr_10.42.42.2(pid=22812): stderr: | �[0;m�[1;31m20221214072940178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214072940178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214072940178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214072940178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214072940178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214072940178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214072940190 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214072940200 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214072940200 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214072940200 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:29:43.420060 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22805): Terminating (SIGTERM) 07:29:43.459620 run iperf3-srv_10.42.42.10(pid=22806): Terminating (SIGTERM) 07:29:43.499416 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22807): Terminating (SIGTERM) 07:29:43.538986 run iperf3-srv_10.42.42.10(pid=22808): Terminating (SIGTERM) 07:29:43.578578 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22811): Terminating (SIGTERM) 07:29:43.618381 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22814): Terminating (SIGTERM) 07:29:43.658135 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22817): Terminating (SIGTERM) 07:29:43.667295 --- ParallelTerminationStrategy: PID 22805 died... 07:29:43.720278 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22805): Terminated: ok {rc=0} 07:29:43.729765 --- ParallelTerminationStrategy: PID 22806 died... 07:29:43.782161 run iperf3-srv_10.42.42.10(pid=22806): Terminated {rc=256} 07:29:43.791570 --- ParallelTerminationStrategy: PID 22807 died... 07:29:43.844727 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22807): Terminated: ok {rc=0} 07:29:43.854263 --- ParallelTerminationStrategy: PID 22808 died... 07:29:43.906776 run iperf3-srv_10.42.42.10(pid=22808): Terminated {rc=256} 07:29:43.916174 --- ParallelTerminationStrategy: PID 22811 died... 07:29:43.968589 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22811): Terminated: ok {rc=0} 07:29:43.978020 --- ParallelTerminationStrategy: PID 22814 died... 07:29:44.030362 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22814): Terminated: ok {rc=0} 07:29:44.039735 --- ParallelTerminationStrategy: PID 22817 died... 07:29:44.092311 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22817): Terminated: ok {rc=0} 07:29:44.175481 bus /gobi_0: Setting Powered False 07:29:45.278749 bus /gobi_0: Setting Powered False 07:29:46.396053 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22815): Process ended prematurely: osmo-stp_10.42.42.5(pid=22815) [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22815)]