Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=29466): Process ended prematurely: osmo-stp_10.42.42.5(pid=29466) [trial-2402↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29466)]
Standard Output
---------------------------------------------- trial-2402 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 08:41:07.591652 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:41:07.602393 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 08:41:07.752911 tst cs_paging_gprs_active.py: using LAC 39729 08:41:07.881281 tst cs_paging_gprs_active.py: using RAC 204 08:41:08.009615 tst cs_paging_gprs_active.py: using CellId 39729 08:41:08.135665 tst cs_paging_gprs_active.py: using BVCI 39730 08:41:08.160486 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:41:08.171862 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:41:08.182974 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:41:08.194143 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:41:08.205200 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:41:08.216359 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:41:08.227581 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:41:08.238654 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:41:08.250397 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:41:08.366540 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:41:08.644703 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:41:08.770543 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:41:09.084065 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29456): Launched 08:41:09.345264 run iperf3-srv_10.42.42.10(pid=29457): Launched 08:41:09.529552 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:41:09.655307 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:41:09.968822 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29458): Launched 08:41:10.231214 run iperf3-srv_10.42.42.10(pid=29459): Launched 08:41:10.415096 tst cs_paging_gprs_active.py:38: start network... 08:41:10.541325 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:41:11.017435 run create_hlr_db(pid=29460): Launched 08:41:11.190482 bus /gobi_6: Setting Powered False 08:41:12.213337 run create_hlr_db(pid=29460): Terminated: ok {rc=0} 08:41:12.640174 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29462): Launched 08:41:12.963509 run osmo-hlr_10.42.42.2(pid=29463): Launched 08:41:13.085152 run osmo-stp_10.42.42.5: Starting osmo-stp 08:41:13.617614 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29465): Launched 08:41:13.920315 run osmo-stp_10.42.42.5(pid=29466): Launched 08:41:14.030352 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:41:14.558369 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29468): Launched 08:41:14.665865 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:41:14.929239 run patchelf(pid=29469): Launched 08:41:15.105542 run osmo-stp_10.42.42.5(pid=29466): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29466)] 08:41:15.234942 run osmo-stp_10.42.42.5(pid=29466): stdout: | (launched: 2022-12-14_08:41:13.770643) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:41:15.364526 run osmo-stp_10.42.42.5(pid=29466): stderr: | �[0;m�[38;5;43m20221214084113940 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214084113940 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214084113940 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214084113941 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214084113941 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214084113941 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214084113941 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:41:15.489657 run osmo-stp_10.42.42.5(pid=29466): stdout: | (launched: 2022-12-14_08:41:13.770643) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:41:15.613692 run osmo-stp_10.42.42.5(pid=29466): stderr: | �[0;m�[38;5;43m20221214084113940 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214084113940 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214084113940 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214084113941 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214084113941 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214084113941 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214084113941 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:41:15.758023 run patchelf(pid=29469): Terminating (SIGINT) 08:41:15.954815 run patchelf(pid=29469): Terminated: ok {rc=0} 08:41:15.987590 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29466): Process ended prematurely: osmo-stp_10.42.42.5(pid=29466) [trial-2402↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29466)] [trial-2402↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 08:41:15.997967 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 08:41:16.061055 run osmo-hlr_10.42.42.2(pid=29463): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29463)] 08:41:16.112361 run osmo-hlr_10.42.42.2(pid=29463): stdout: | (launched: 2022-12-14_08:41:12.804408) 08:41:16.164632 run osmo-hlr_10.42.42.2(pid=29463): stderr: | �[0;m�[1;31m20221214084113004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214084113004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214084113004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214084113004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214084113004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214084113004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214084113015 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214084113023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214084113023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214084113024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:41:16.209279 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29456): Terminating (SIGTERM) 08:41:16.251637 run iperf3-srv_10.42.42.10(pid=29457): Terminating (SIGTERM) 08:41:16.296568 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29458): Terminating (SIGTERM) 08:41:16.340272 run iperf3-srv_10.42.42.10(pid=29459): Terminating (SIGTERM) 08:41:16.386114 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29462): Terminating (SIGTERM) 08:41:16.430590 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29465): Terminating (SIGTERM) 08:41:16.476470 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29468): Terminating (SIGTERM) 08:41:16.487664 --- ParallelTerminationStrategy: PID 29456 died... 08:41:16.546590 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29456): Terminated: ok {rc=0} 08:41:16.557276 --- ParallelTerminationStrategy: PID 29457 died... 08:41:16.614044 run iperf3-srv_10.42.42.10(pid=29457): Terminated {rc=256} 08:41:16.624364 --- ParallelTerminationStrategy: PID 29458 died... 08:41:16.682314 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29458): Terminated: ok {rc=0} 08:41:16.692814 --- ParallelTerminationStrategy: PID 29459 died... 08:41:16.749551 run iperf3-srv_10.42.42.10(pid=29459): Terminated {rc=256} 08:41:16.759959 --- ParallelTerminationStrategy: PID 29462 died... 08:41:16.818694 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29462): Terminated: ok {rc=0} 08:41:16.829596 --- ParallelTerminationStrategy: PID 29465 died... 08:41:16.888494 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29465): Terminated: ok {rc=0} 08:41:16.898893 --- ParallelTerminationStrategy: PID 29468 died... 08:41:16.955411 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29468): Terminated: ok {rc=0} 08:41:17.042055 bus /gobi_0: Setting Powered False 08:41:18.143912 bus /gobi_0: Setting Powered False 08:41:19.254532 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29466): Process ended prematurely: osmo-stp_10.42.42.5(pid=29466) [trial-2402↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29466)]