Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=30940): Process ended prematurely: osmo-stp_10.42.42.5(pid=30940) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30940)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 08:57:38.988157 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:38.999268 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:57:39.144706 tst cs_paging_gprs_active.py: using LAC 39817 08:57:39.268250 tst cs_paging_gprs_active.py: using RAC 37 08:57:39.388906 tst cs_paging_gprs_active.py: using CellId 39817 08:57:39.509658 tst cs_paging_gprs_active.py: using BVCI 39818 08:57:39.532727 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:39.543651 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:39.554487 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:39.565230 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:39.576847 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:39.588458 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:39.600245 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:39.611662 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:39.623379 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:57:39.747252 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:57:40.028293 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:57:40.154585 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:57:40.469542 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30930): Launched 08:57:40.731585 run iperf3-srv_10.42.42.10(pid=30931): Launched 08:57:40.916482 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:57:41.043098 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:57:41.357642 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30932): Launched 08:57:41.619964 run iperf3-srv_10.42.42.10(pid=30933): Launched 08:57:41.804863 tst cs_paging_gprs_active.py:38: start network... 08:57:41.931543 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:57:42.412030 run create_hlr_db(pid=30934): Launched 08:57:42.586668 bus /gobi_6: Setting Powered False 08:57:43.608611 run create_hlr_db(pid=30934): Terminated: ok {rc=0} 08:57:44.041544 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30936): Launched 08:57:44.369187 run osmo-hlr_10.42.42.2(pid=30937): Launched 08:57:44.491273 run osmo-stp_10.42.42.5: Starting osmo-stp 08:57:45.060410 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30939): Launched 08:57:45.388434 run osmo-stp_10.42.42.5(pid=30940): Launched 08:57:45.506879 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:57:46.121962 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30942): Launched 08:57:46.240543 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:57:46.533684 run patchelf(pid=30943): Launched 08:57:46.727528 run osmo-stp_10.42.42.5(pid=30940): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30940)] 08:57:46.868519 run osmo-stp_10.42.42.5(pid=30940): stdout: | (launched: 2022-12-14_08:57:45.226541) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:57:47.010453 run osmo-stp_10.42.42.5(pid=30940): stderr: | �[0;m�[38;5;43m20221214085745419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085745419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085745419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085745420 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085745420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085745420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085745420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:57:47.147997 run osmo-stp_10.42.42.5(pid=30940): stdout: | (launched: 2022-12-14_08:57:45.226541) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:57:47.283252 run osmo-stp_10.42.42.5(pid=30940): stderr: | �[0;m�[38;5;43m20221214085745419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085745419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085745419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085745420 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085745420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085745420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085745420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:57:47.438792 run patchelf(pid=30943): Terminating (SIGINT) 08:57:47.620781 run patchelf(pid=30943): Terminated: ok {rc=0} 08:57:47.654686 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30940): Process ended prematurely: osmo-stp_10.42.42.5(pid=30940) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30940)] [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 08:57:47.665222 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 08:57:47.728392 run osmo-hlr_10.42.42.2(pid=30937): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30937)] 08:57:47.780374 run osmo-hlr_10.42.42.2(pid=30937): stdout: | (launched: 2022-12-14_08:57:44.206981) 08:57:47.832679 run osmo-hlr_10.42.42.2(pid=30937): stderr: | �[0;m�[1;31m20221214085744404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214085744404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214085744404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214085744404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214085744404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214085744404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214085744416 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214085744426 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214085744427 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214085744427 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:57:47.877286 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30930): Terminating (SIGTERM) 08:57:47.919421 run iperf3-srv_10.42.42.10(pid=30931): Terminating (SIGTERM) 08:57:47.962314 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30932): Terminating (SIGTERM) 08:57:48.005123 run iperf3-srv_10.42.42.10(pid=30933): Terminating (SIGTERM) 08:57:48.047590 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30936): Terminating (SIGTERM) 08:57:48.090070 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30939): Terminating (SIGTERM) 08:57:48.132127 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30942): Terminating (SIGTERM) 08:57:48.141931 --- ParallelTerminationStrategy: PID 30930 died... 08:57:48.198601 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30930): Terminated: ok {rc=0} 08:57:48.208821 --- ParallelTerminationStrategy: PID 30931 died... 08:57:48.265209 run iperf3-srv_10.42.42.10(pid=30931): Terminated {rc=256} 08:57:48.275423 --- ParallelTerminationStrategy: PID 30932 died... 08:57:48.331934 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30932): Terminated: ok {rc=0} 08:57:48.342265 --- ParallelTerminationStrategy: PID 30933 died... 08:57:48.398586 run iperf3-srv_10.42.42.10(pid=30933): Terminated {rc=256} 08:57:48.408763 --- ParallelTerminationStrategy: PID 30936 died... 08:57:48.465575 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30936): Terminated: ok {rc=0} 08:57:48.475802 --- ParallelTerminationStrategy: PID 30939 died... 08:57:48.532165 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30939): Terminated: ok {rc=0} 08:57:48.542217 --- ParallelTerminationStrategy: PID 30942 died... 08:57:48.598998 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30942): Terminated: ok {rc=0} 08:57:48.686348 bus /gobi_0: Setting Powered False 08:57:49.794115 bus /gobi_0: Setting Powered False 08:57:50.902589 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30940): Process ended prematurely: osmo-stp_10.42.42.5(pid=30940) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30940)]