Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=31535): Process ended prematurely: osmo-stp_10.42.42.5(pid=31535) [trial-2402↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31535)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 09:05:53.775478 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:05:53.786489 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:05:53.934442 tst cs_paging_gprs_active.py: using LAC 39861 09:05:54.063453 tst cs_paging_gprs_active.py: using RAC 81 09:05:54.192355 tst cs_paging_gprs_active.py: using CellId 39861 09:05:54.313317 tst cs_paging_gprs_active.py: using BVCI 39862 09:05:54.336904 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:05:54.347933 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:05:54.358736 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:05:54.369822 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:05:54.380658 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:05:54.391668 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:05:54.402819 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:05:54.413721 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:05:54.424886 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:05:54.546766 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:05:54.845488 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:05:54.983070 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:05:55.323647 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31525): Launched 09:05:55.607511 run iperf3-srv_10.42.42.10(pid=31526): Launched 09:05:55.809262 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:05:55.946500 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:05:56.287446 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31527): Launched 09:05:56.571888 run iperf3-srv_10.42.42.10(pid=31528): Launched 09:05:56.772860 tst cs_paging_gprs_active.py:38: start network... 09:05:56.909753 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:05:57.436246 run create_hlr_db(pid=31529): Launched 09:05:57.625325 bus /gobi_6: Setting Powered False 09:05:58.646409 run create_hlr_db(pid=31529): Terminated: ok {rc=0} 09:05:59.057630 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31531): Launched 09:05:59.364878 run osmo-hlr_10.42.42.2(pid=31532): Launched 09:05:59.485742 run osmo-stp_10.42.42.5: Starting osmo-stp 09:06:00.026328 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31534): Launched 09:06:00.335085 run osmo-stp_10.42.42.5(pid=31535): Launched 09:06:00.447301 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:06:01.037434 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31537): Launched 09:06:01.157687 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:06:01.454834 run patchelf(pid=31538): Launched 09:06:01.638646 run osmo-stp_10.42.42.5(pid=31535): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31535)] 09:06:01.774001 run osmo-stp_10.42.42.5(pid=31535): stdout: | (launched: 2022-12-14_09:06:00.181671) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:06:01.909593 run osmo-stp_10.42.42.5(pid=31535): stderr: | �[0;m�[38;5;43m20221214090600350 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214090600350 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214090600350 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214090600351 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214090600351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214090600351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214090600351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:06:02.040598 run osmo-stp_10.42.42.5(pid=31535): stdout: | (launched: 2022-12-14_09:06:00.181671) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:06:02.169889 run osmo-stp_10.42.42.5(pid=31535): stderr: | �[0;m�[38;5;43m20221214090600350 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214090600350 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214090600350 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214090600351 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214090600351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214090600351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214090600351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:06:02.317554 run patchelf(pid=31538): Terminating (SIGINT) 09:06:02.489658 run patchelf(pid=31538): Terminated: ok {rc=0} 09:06:02.521384 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31535): Process ended prematurely: osmo-stp_10.42.42.5(pid=31535) [trial-2402↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31535)] [trial-2402↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 09:06:02.530974 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 09:06:02.592322 run osmo-hlr_10.42.42.2(pid=31532): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31532)] 09:06:02.641795 run osmo-hlr_10.42.42.2(pid=31532): stdout: | (launched: 2022-12-14_09:05:59.213472) 09:06:02.691894 run osmo-hlr_10.42.42.2(pid=31532): stderr: | �[0;m�[1;31m20221214090559388 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214090559388 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214090559388 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214090559388 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214090559388 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214090559388 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214090559401 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214090559410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214090559411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214090559411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:06:02.734713 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31525): Terminating (SIGTERM) 09:06:02.774756 run iperf3-srv_10.42.42.10(pid=31526): Terminating (SIGTERM) 09:06:02.814874 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31527): Terminating (SIGTERM) 09:06:02.855045 run iperf3-srv_10.42.42.10(pid=31528): Terminating (SIGTERM) 09:06:02.895439 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31531): Terminating (SIGTERM) 09:06:02.935914 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31534): Terminating (SIGTERM) 09:06:02.976206 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31537): Terminating (SIGTERM) 09:06:02.985616 --- ParallelTerminationStrategy: PID 31525 died... 09:06:03.040256 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31525): Terminated: ok {rc=0} 09:06:03.050047 --- ParallelTerminationStrategy: PID 31526 died... 09:06:03.103396 run iperf3-srv_10.42.42.10(pid=31526): Terminated {rc=256} 09:06:03.113111 --- ParallelTerminationStrategy: PID 31527 died... 09:06:03.166426 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31527): Terminated: ok {rc=0} 09:06:03.176104 --- ParallelTerminationStrategy: PID 31528 died... 09:06:03.229255 run iperf3-srv_10.42.42.10(pid=31528): Terminated {rc=256} 09:06:03.238776 --- ParallelTerminationStrategy: PID 31531 died... 09:06:03.292320 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31531): Terminated: ok {rc=0} 09:06:03.302142 --- ParallelTerminationStrategy: PID 31534 died... 09:06:03.355640 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31534): Terminated: ok {rc=0} 09:06:03.365402 --- ParallelTerminationStrategy: PID 31537 died... 09:06:03.418650 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31537): Terminated: ok {rc=0} 09:06:03.507264 bus /gobi_0: Setting Powered False 09:06:04.609495 bus /gobi_0: Setting Powered False 09:06:05.715168 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31535): Process ended prematurely: osmo-stp_10.42.42.5(pid=31535) [trial-2402↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31535)]