Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=11522): Process ended prematurely: osmo-stp_10.42.42.5(pid=11522) [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11522)]
Standard Output
---------------------------------------------- trial-2403 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 11:05:29.343724 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:29.355495 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 11:05:29.498224 tst cs_paging_gprs_active.py: using LAC 40492 11:05:29.626504 tst cs_paging_gprs_active.py: using RAC 202 11:05:29.751945 tst cs_paging_gprs_active.py: using CellId 40492 11:05:29.868742 tst cs_paging_gprs_active.py: using BVCI 40493 11:05:29.891889 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:29.903335 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:29.914743 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:29.926062 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:29.937567 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:29.948809 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:29.960269 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:29.971515 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:29.983219 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:05:30.101791 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:05:30.395363 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:05:30.529907 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:05:30.879476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11512): Launched 11:05:31.190859 run iperf3-srv_10.42.42.10(pid=11513): Launched 11:05:31.381573 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:05:31.512799 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:05:31.854477 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11514): Launched 11:05:32.131635 run iperf3-srv_10.42.42.10(pid=11515): Launched 11:05:32.323353 tst cs_paging_gprs_active.py:38: start network... 11:05:32.452200 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:05:32.932608 run create_hlr_db(pid=11516): Launched 11:05:33.106565 bus /gobi_6: Setting Powered False 11:05:34.127649 run create_hlr_db(pid=11516): Terminated: ok {rc=0} 11:05:34.532476 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11518): Launched 11:05:34.838585 run osmo-hlr_10.42.42.2(pid=11519): Launched 11:05:34.957112 run osmo-stp_10.42.42.5: Starting osmo-stp 11:05:35.490012 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11521): Launched 11:05:35.794399 run osmo-stp_10.42.42.5(pid=11522): Launched 11:05:35.910486 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:05:36.441582 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11524): Launched 11:05:36.549371 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:05:36.815828 run patchelf(pid=11525): Launched 11:05:36.994164 run osmo-stp_10.42.42.5(pid=11522): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11522)] 11:05:37.124147 run osmo-stp_10.42.42.5(pid=11522): stdout: | (launched: 2022-12-14_11:05:35.643110) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:05:37.254558 run osmo-stp_10.42.42.5(pid=11522): stderr: | �[0;m�[38;5;43m20221214110535811 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214110535811 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214110535812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214110535812 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214110535812 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214110535812 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214110535813 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:05:37.379896 run osmo-stp_10.42.42.5(pid=11522): stdout: | (launched: 2022-12-14_11:05:35.643110) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:05:37.504658 run osmo-stp_10.42.42.5(pid=11522): stderr: | �[0;m�[38;5;43m20221214110535811 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214110535811 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214110535812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214110535812 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214110535812 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214110535812 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214110535813 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:05:37.649880 run patchelf(pid=11525): Terminating (SIGINT) 11:05:37.820633 run patchelf(pid=11525): Terminated: ok {rc=0} 11:05:37.852288 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11522): Process ended prematurely: osmo-stp_10.42.42.5(pid=11522) [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11522)] [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 11:05:37.861783 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 11:05:37.922948 run osmo-hlr_10.42.42.2(pid=11519): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11519)] 11:05:37.973055 run osmo-hlr_10.42.42.2(pid=11519): stdout: | (launched: 2022-12-14_11:05:34.686714) 11:05:38.023388 run osmo-hlr_10.42.42.2(pid=11519): stderr: | �[0;m�[1;31m20221214110534858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214110534858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214110534858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214110534858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214110534858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214110534858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214110534873 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214110534881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214110534882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214110534882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:05:38.066162 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11512): Terminating (SIGTERM) 11:05:38.106503 run iperf3-srv_10.42.42.10(pid=11513): Terminating (SIGTERM) 11:05:38.146684 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11514): Terminating (SIGTERM) 11:05:38.186806 run iperf3-srv_10.42.42.10(pid=11515): Terminating (SIGTERM) 11:05:38.227396 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11518): Terminating (SIGTERM) 11:05:38.267662 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11521): Terminating (SIGTERM) 11:05:38.307857 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11524): Terminating (SIGTERM) 11:05:38.317072 --- ParallelTerminationStrategy: PID 11512 died... 11:05:38.370956 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11512): Terminated: ok {rc=0} 11:05:38.380488 --- ParallelTerminationStrategy: PID 11513 died... 11:05:38.433685 run iperf3-srv_10.42.42.10(pid=11513): Terminated {rc=256} 11:05:38.443084 --- ParallelTerminationStrategy: PID 11514 died... 11:05:38.496694 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11514): Terminated: ok {rc=0} 11:05:38.506117 --- ParallelTerminationStrategy: PID 11515 died... 11:05:38.560103 run iperf3-srv_10.42.42.10(pid=11515): Terminated {rc=256} 11:05:38.569785 --- ParallelTerminationStrategy: PID 11518 died... 11:05:38.622792 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11518): Terminated: ok {rc=0} 11:05:38.632250 --- ParallelTerminationStrategy: PID 11521 died... 11:05:38.685835 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11521): Terminated: ok {rc=0} 11:05:38.695349 --- ParallelTerminationStrategy: PID 11524 died... 11:05:38.748812 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11524): Terminated: ok {rc=0} 11:05:38.838105 bus /gobi_0: Setting Powered False 11:05:39.941198 bus /gobi_0: Setting Powered False 11:05:41.046911 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11522): Process ended prematurely: osmo-stp_10.42.42.5(pid=11522) [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11522)]