Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=6139): Process ended prematurely: osmo-stp_10.42.42.5(pid=6139) [trial-2403↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6139)]
Standard Output
---------------------------------------------- trial-2403 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 10:10:17.111258 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:10:17.125415 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:10:17.282470 tst ping_idle_ping.py: using LAC 40199 10:10:17.399142 tst ping_idle_ping.py: using RAC 164 10:10:17.515740 tst ping_idle_ping.py: using CellId 40199 10:10:17.631438 tst ping_idle_ping.py: using BVCI 40200 10:10:17.654474 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:10:17.665458 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:10:17.676134 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:10:17.686949 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:10:17.697844 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:10:17.708680 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:10:17.719778 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:10:17.730878 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:10:18.024170 tst ping_idle_ping.py:24: start network... 10:10:18.159055 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:10:18.681122 run create_hlr_db(pid=6133): Launched 10:10:18.868333 bus /gobi_6: Setting Powered False 10:10:19.888039 run create_hlr_db(pid=6133): Terminated: ok {rc=0} 10:10:20.293794 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6135): Launched 10:10:20.597415 run osmo-hlr_10.42.42.2(pid=6136): Launched 10:10:20.712513 run osmo-stp_10.42.42.5: Starting osmo-stp 10:10:21.242201 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6138): Launched 10:10:21.543944 run osmo-stp_10.42.42.5(pid=6139): Launched 10:10:21.653873 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:10:22.177628 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6141): Launched 10:10:22.283811 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:10:22.546365 run patchelf(pid=6142): Launched 10:10:22.722219 run osmo-stp_10.42.42.5(pid=6139): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6139)] 10:10:22.851848 run osmo-stp_10.42.42.5(pid=6139): stdout: | (launched: 2022-12-14_10:10:21.394456) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:10:22.984226 run osmo-stp_10.42.42.5(pid=6139): stderr: | �[0;m�[38;5;43m20221214101021564 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101021564 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101021564 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101021565 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101021565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101021565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101021565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:10:23.111588 run osmo-stp_10.42.42.5(pid=6139): stdout: | (launched: 2022-12-14_10:10:21.394456) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:10:23.239411 run osmo-stp_10.42.42.5(pid=6139): stderr: | �[0;m�[38;5;43m20221214101021564 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101021564 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101021564 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101021565 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101021565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101021565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101021565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:10:23.388896 run patchelf(pid=6142): Terminating (SIGINT) 10:10:23.563512 run patchelf(pid=6142): Terminated: ok {rc=0} 10:10:23.596041 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=6139): Process ended prematurely: osmo-stp_10.42.42.5(pid=6139) [trial-2403↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6139)] [trial-2403↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 10:10:23.606034 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 10:10:23.668490 run osmo-hlr_10.42.42.2(pid=6136): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6136)] 10:10:23.719698 run osmo-hlr_10.42.42.2(pid=6136): stdout: | (launched: 2022-12-14_10:10:20.447357) 10:10:23.772449 run osmo-hlr_10.42.42.2(pid=6136): stderr: | �[0;m�[1;31m20221214101020622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214101020622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214101020622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214101020622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214101020622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214101020622 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214101020634 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214101020643 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214101020643 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214101020643 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:10:23.817807 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6135): Terminating (SIGTERM) 10:10:23.860325 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6138): Terminating (SIGTERM) 10:10:23.904209 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6141): Terminating (SIGTERM) 10:10:23.915324 --- ParallelTerminationStrategy: PID 6135 died... 10:10:23.973105 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6135): Terminated: ok {rc=0} 10:10:23.983606 --- ParallelTerminationStrategy: PID 6138 died... 10:10:24.042145 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6138): Terminated: ok {rc=0} 10:10:24.053800 --- ParallelTerminationStrategy: PID 6141 died... 10:10:24.109481 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6141): Terminated: ok {rc=0} 10:10:24.196564 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6139): Process ended prematurely: osmo-stp_10.42.42.5(pid=6139) [trial-2403↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6139)]