Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=7327): Process ended prematurely: osmo-stp_10.42.42.5(pid=7327) [trial-2403↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7327)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 10:17:04.555067 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:17:04.566401 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:17:04.733084 tst cs_paging_gprs_active.py: using LAC 40236 10:17:04.859239 tst cs_paging_gprs_active.py: using RAC 201 10:17:04.985668 tst cs_paging_gprs_active.py: using CellId 40236 10:17:05.113499 tst cs_paging_gprs_active.py: using BVCI 40237 10:17:05.138469 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:17:05.149756 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:17:05.160801 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:17:05.171848 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:17:05.182941 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:17:05.194099 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:17:05.205291 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:17:05.216284 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:17:05.228119 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:17:05.347697 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:17:05.645126 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:17:05.781331 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:17:06.121068 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7317): Launched 10:17:06.404065 run iperf3-srv_10.42.42.10(pid=7318): Launched 10:17:06.604909 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:17:06.741132 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:17:07.080726 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7319): Launched 10:17:07.364606 run iperf3-srv_10.42.42.10(pid=7320): Launched 10:17:07.565958 tst cs_paging_gprs_active.py:38: start network... 10:17:07.702201 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:17:08.227250 run create_hlr_db(pid=7321): Launched 10:17:08.416873 bus /gobi_6: Setting Powered False 10:17:09.437558 run create_hlr_db(pid=7321): Terminated: ok {rc=0} 10:17:09.850596 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7323): Launched 10:17:10.157790 run osmo-hlr_10.42.42.2(pid=7324): Launched 10:17:10.275140 run osmo-stp_10.42.42.5: Starting osmo-stp 10:17:10.809152 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7326): Launched 10:17:11.116620 run osmo-stp_10.42.42.5(pid=7327): Launched 10:17:11.228492 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:17:11.766855 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7329): Launched 10:17:11.876549 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:17:12.148321 run patchelf(pid=7330): Launched 10:17:12.328800 run osmo-stp_10.42.42.5(pid=7327): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7327)] 10:17:12.461310 run osmo-stp_10.42.42.5(pid=7327): stdout: | (launched: 2022-12-14_10:17:10.964676) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:17:12.593330 run osmo-stp_10.42.42.5(pid=7327): stderr: | �[0;m�[38;5;43m20221214101711136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101711136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101711137 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101711137 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101711137 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101711138 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101711138 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:17:12.720487 run osmo-stp_10.42.42.5(pid=7327): stdout: | (launched: 2022-12-14_10:17:10.964676) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:17:12.846729 run osmo-stp_10.42.42.5(pid=7327): stderr: | �[0;m�[38;5;43m20221214101711136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101711136 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101711137 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101711137 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101711137 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101711138 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101711138 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:17:12.994491 run patchelf(pid=7330): Terminating (SIGINT) 10:17:13.167634 run patchelf(pid=7330): Terminated: ok {rc=0} 10:17:13.200061 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7327): Process ended prematurely: osmo-stp_10.42.42.5(pid=7327) [trial-2403↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7327)] [trial-2403↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 10:17:13.209417 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 10:17:13.270727 run osmo-hlr_10.42.42.2(pid=7324): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7324)] 10:17:13.320428 run osmo-hlr_10.42.42.2(pid=7324): stdout: | (launched: 2022-12-14_10:17:10.006080) 10:17:13.370646 run osmo-hlr_10.42.42.2(pid=7324): stderr: | �[0;m�[1;31m20221214101710181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214101710181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214101710181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214101710182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214101710182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214101710182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214101710194 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214101710202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214101710202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214101710202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:17:13.413323 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7317): Terminating (SIGTERM) 10:17:13.453575 run iperf3-srv_10.42.42.10(pid=7318): Terminating (SIGTERM) 10:17:13.493873 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7319): Terminating (SIGTERM) 10:17:13.533897 run iperf3-srv_10.42.42.10(pid=7320): Terminating (SIGTERM) 10:17:13.574030 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7323): Terminating (SIGTERM) 10:17:13.614804 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7326): Terminating (SIGTERM) 10:17:13.654964 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7329): Terminating (SIGTERM) 10:17:13.664235 --- ParallelTerminationStrategy: PID 7317 died... 10:17:13.718129 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7317): Terminated: ok {rc=0} 10:17:13.727734 --- ParallelTerminationStrategy: PID 7318 died... 10:17:13.781185 run iperf3-srv_10.42.42.10(pid=7318): Terminated {rc=256} 10:17:13.791015 --- ParallelTerminationStrategy: PID 7319 died... 10:17:13.844737 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7319): Terminated: ok {rc=0} 10:17:13.854425 --- ParallelTerminationStrategy: PID 7320 died... 10:17:13.907522 run iperf3-srv_10.42.42.10(pid=7320): Terminated {rc=256} 10:17:13.917070 --- ParallelTerminationStrategy: PID 7323 died... 10:17:13.970503 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7323): Terminated: ok {rc=0} 10:17:13.980125 --- ParallelTerminationStrategy: PID 7326 died... 10:17:14.033584 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7326): Terminated: ok {rc=0} 10:17:14.043183 --- ParallelTerminationStrategy: PID 7329 died... 10:17:14.096777 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7329): Terminated: ok {rc=0} 10:17:14.185531 bus /gobi_0: Setting Powered False 10:17:15.293818 bus /gobi_0: Setting Powered False 10:17:16.406136 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7327): Process ended prematurely: osmo-stp_10.42.42.5(pid=7327) [trial-2403↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7327)]