Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=7307): Process ended prematurely: osmo-stp_10.42.42.5(pid=7307) [trial-2403↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7307)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 10:16:54.928341 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:54.940205 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:16:55.081194 tst ping_idle_ping.py: using LAC 40235 10:16:55.200859 tst ping_idle_ping.py: using RAC 200 10:16:55.321050 tst ping_idle_ping.py: using CellId 40235 10:16:55.439618 tst ping_idle_ping.py: using BVCI 40236 10:16:55.462831 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:55.473928 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:55.484654 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:55.495344 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:55.506334 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:55.517275 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:55.528395 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:16:55.539391 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:16:55.833743 tst ping_idle_ping.py:24: start network... 10:16:55.967915 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:16:56.486729 run create_hlr_db(pid=7301): Launched 10:16:56.674542 bus /gobi_6: Setting Powered False 10:16:57.694438 run create_hlr_db(pid=7301): Terminated: ok {rc=0} 10:16:58.109709 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7303): Launched 10:16:58.434000 run osmo-hlr_10.42.42.2(pid=7304): Launched 10:16:58.550039 run osmo-stp_10.42.42.5: Starting osmo-stp 10:16:59.111309 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7306): Launched 10:16:59.437192 run osmo-stp_10.42.42.5(pid=7307): Launched 10:16:59.554410 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:17:00.117857 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7309): Launched 10:17:00.232621 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:17:00.516929 run patchelf(pid=7310): Launched 10:17:00.705964 run osmo-stp_10.42.42.5(pid=7307): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7307)] 10:17:00.847974 run osmo-stp_10.42.42.5(pid=7307): stdout: | (launched: 2022-12-14_10:16:59.275821) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:17:00.993533 run osmo-stp_10.42.42.5(pid=7307): stderr: | �[0;m�[38;5;43m20221214101659468 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101659468 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101659468 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101659469 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101659469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101659469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101659469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:17:01.143730 run osmo-stp_10.42.42.5(pid=7307): stdout: | (launched: 2022-12-14_10:16:59.275821) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:17:01.279711 run osmo-stp_10.42.42.5(pid=7307): stderr: | �[0;m�[38;5;43m20221214101659468 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101659468 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101659468 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101659469 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101659469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101659469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101659469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:17:01.438038 run patchelf(pid=7310): Terminating (SIGINT) 10:17:01.666625 run patchelf(pid=7310): Terminated: ok {rc=0} 10:17:01.710000 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=7307): Process ended prematurely: osmo-stp_10.42.42.5(pid=7307) [trial-2403↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7307)] [trial-2403↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 10:17:01.723600 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 10:17:01.799278 run osmo-hlr_10.42.42.2(pid=7304): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7304)] 10:17:01.863755 run osmo-hlr_10.42.42.2(pid=7304): stdout: | (launched: 2022-12-14_10:16:58.274112) 10:17:01.929059 run osmo-hlr_10.42.42.2(pid=7304): stderr: | �[0;m�[1;31m20221214101658472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214101658472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214101658472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214101658472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214101658472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214101658472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214101658494 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214101658504 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214101658504 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214101658504 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:17:01.981539 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7303): Terminating (SIGTERM) 10:17:02.029209 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7306): Terminating (SIGTERM) 10:17:02.073919 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7309): Terminating (SIGTERM) 10:17:02.084263 --- ParallelTerminationStrategy: PID 7303 died... 10:17:02.151717 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7303): Terminated: ok {rc=0} 10:17:02.165643 --- ParallelTerminationStrategy: PID 7306 died... 10:17:02.234079 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7306): Terminated: ok {rc=0} 10:17:02.246567 --- ParallelTerminationStrategy: PID 7309 died... 10:17:02.302417 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7309): Terminated: ok {rc=0} 10:17:02.389969 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7307): Process ended prematurely: osmo-stp_10.42.42.5(pid=7307) [trial-2403↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7307)]