Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10305): Process ended prematurely: osmo-stp_10.42.42.5(pid=10305) [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10305)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:52:01.363485 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:52:01.378819 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:52:01.548402 tst cs_paging_gprs_active.py: using LAC 40421 10:52:01.681313 tst cs_paging_gprs_active.py: using RAC 131 10:52:01.814664 tst cs_paging_gprs_active.py: using CellId 40421 10:52:01.967653 tst cs_paging_gprs_active.py: using BVCI 40422 10:52:01.997524 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:52:02.009864 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:52:02.021413 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:52:02.032883 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:52:02.044658 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:52:02.056494 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:52:02.068453 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:52:02.080418 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:52:02.092455 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:52:02.213215 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:52:02.496831 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:52:02.624135 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:52:02.943376 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10295): Launched 10:52:03.208924 run iperf3-srv_10.42.42.10(pid=10296): Launched 10:52:03.395857 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:52:03.523635 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:52:03.843589 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10297): Launched 10:52:04.108783 run iperf3-srv_10.42.42.10(pid=10298): Launched 10:52:04.296144 tst cs_paging_gprs_active.py:38: start network... 10:52:04.423846 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:52:04.907259 run create_hlr_db(pid=10299): Launched 10:52:05.083080 bus /gobi_6: Setting Powered False 10:52:06.104795 run create_hlr_db(pid=10299): Terminated: ok {rc=0} 10:52:06.516624 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10301): Launched 10:52:06.825074 run osmo-hlr_10.42.42.2(pid=10302): Launched 10:52:06.942645 run osmo-stp_10.42.42.5: Starting osmo-stp 10:52:07.478923 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10304): Launched 10:52:07.786779 run osmo-stp_10.42.42.5(pid=10305): Launched 10:52:07.898622 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:52:08.436030 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10307): Launched 10:52:08.545357 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:52:08.822472 run patchelf(pid=10308): Launched 10:52:09.003561 run osmo-stp_10.42.42.5(pid=10305): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10305)] 10:52:09.135982 run osmo-stp_10.42.42.5(pid=10305): stdout: | (launched: 2022-12-14_10:52:07.635068) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:52:09.268168 run osmo-stp_10.42.42.5(pid=10305): stderr: | �[0;m�[38;5;43m20221214105207803 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214105207804 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214105207804 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214105207804 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214105207805 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214105207805 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214105207805 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:52:09.395550 run osmo-stp_10.42.42.5(pid=10305): stdout: | (launched: 2022-12-14_10:52:07.635068) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:52:09.521781 run osmo-stp_10.42.42.5(pid=10305): stderr: | �[0;m�[38;5;43m20221214105207803 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214105207804 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214105207804 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214105207804 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214105207805 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214105207805 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214105207805 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:52:09.669592 run patchelf(pid=10308): Terminating (SIGINT) 10:52:09.842805 run patchelf(pid=10308): Terminated: ok {rc=0} 10:52:09.874774 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10305): Process ended prematurely: osmo-stp_10.42.42.5(pid=10305) [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10305)] [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:52:09.884259 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 10:52:09.945160 run osmo-hlr_10.42.42.2(pid=10302): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10302)] 10:52:09.994727 run osmo-hlr_10.42.42.2(pid=10302): stdout: | (launched: 2022-12-14_10:52:06.672073) 10:52:10.044865 run osmo-hlr_10.42.42.2(pid=10302): stderr: | �[0;m�[1;31m20221214105206848 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214105206848 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214105206848 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214105206848 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214105206848 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214105206848 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214105206864 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214105206874 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214105206874 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214105206874 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:52:10.087665 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10295): Terminating (SIGTERM) 10:52:10.128158 run iperf3-srv_10.42.42.10(pid=10296): Terminating (SIGTERM) 10:52:10.168784 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10297): Terminating (SIGTERM) 10:52:10.209123 run iperf3-srv_10.42.42.10(pid=10298): Terminating (SIGTERM) 10:52:10.249833 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10301): Terminating (SIGTERM) 10:52:10.290221 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10304): Terminating (SIGTERM) 10:52:10.330678 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10307): Terminating (SIGTERM) 10:52:10.339938 --- ParallelTerminationStrategy: PID 10295 died... 10:52:10.394215 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10295): Terminated: ok {rc=0} 10:52:10.403852 --- ParallelTerminationStrategy: PID 10296 died... 10:52:10.457679 run iperf3-srv_10.42.42.10(pid=10296): Terminated {rc=256} 10:52:10.467294 --- ParallelTerminationStrategy: PID 10297 died... 10:52:10.521019 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10297): Terminated: ok {rc=0} 10:52:10.530620 --- ParallelTerminationStrategy: PID 10298 died... 10:52:10.584870 run iperf3-srv_10.42.42.10(pid=10298): Terminated {rc=256} 10:52:10.594509 --- ParallelTerminationStrategy: PID 10301 died... 10:52:10.648307 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10301): Terminated: ok {rc=0} 10:52:10.658038 --- ParallelTerminationStrategy: PID 10304 died... 10:52:10.711704 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10304): Terminated: ok {rc=0} 10:52:10.721728 --- ParallelTerminationStrategy: PID 10307 died... 10:52:10.775754 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10307): Terminated: ok {rc=0} 10:52:10.865413 bus /gobi_0: Setting Powered False 10:52:11.969586 bus /gobi_0: Setting Powered False 10:52:13.081745 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10305): Process ended prematurely: osmo-stp_10.42.42.5(pid=10305) [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10305)]