Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=8223): Process ended prematurely: osmo-stp_10.42.42.5(pid=8223) [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8223)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 10:25:55.959521 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:25:55.970582 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:25:56.126506 tst cs_paging_gprs_active.py: using LAC 40283 10:25:56.245054 tst cs_paging_gprs_active.py: using RAC 248 10:25:56.363811 tst cs_paging_gprs_active.py: using CellId 40283 10:25:56.484648 tst cs_paging_gprs_active.py: using BVCI 40284 10:25:56.507965 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:25:56.519081 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:25:56.529959 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:25:56.540686 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:25:56.551873 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:25:56.562997 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:25:56.574275 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:25:56.585346 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:25:56.596430 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:25:56.717782 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:25:57.001039 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:25:57.128644 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:25:57.446565 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8213): Launched 10:25:57.711154 run iperf3-srv_10.42.42.10(pid=8214): Launched 10:25:57.898469 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:25:58.025810 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:25:58.344788 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8215): Launched 10:25:58.609597 run iperf3-srv_10.42.42.10(pid=8216): Launched 10:25:58.795689 tst cs_paging_gprs_active.py:38: start network... 10:25:58.923003 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:25:59.405623 run create_hlr_db(pid=8217): Launched 10:25:59.581288 bus /gobi_6: Setting Powered False 10:26:00.603933 run create_hlr_db(pid=8217): Terminated: ok {rc=0} 10:26:01.047366 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8219): Launched 10:26:01.459526 run osmo-hlr_10.42.42.2(pid=8220): Launched 10:26:01.756330 run osmo-stp_10.42.42.5: Starting osmo-stp 10:26:02.507188 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8222): Launched 10:26:02.815955 run osmo-stp_10.42.42.5(pid=8223): Launched 10:26:02.927199 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:26:03.459930 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8225): Launched 10:26:03.568554 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:26:03.836530 run patchelf(pid=8226): Launched 10:26:04.016555 run osmo-stp_10.42.42.5(pid=8223): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8223)] 10:26:04.148435 run osmo-stp_10.42.42.5(pid=8223): stdout: | (launched: 2022-12-14_10:26:02.662568) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:26:04.280338 run osmo-stp_10.42.42.5(pid=8223): stderr: | �[0;m�[38;5;43m20221214102602831 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214102602831 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214102602831 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214102602832 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214102602832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214102602832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214102602832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:26:04.407277 run osmo-stp_10.42.42.5(pid=8223): stdout: | (launched: 2022-12-14_10:26:02.662568) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:26:04.533350 run osmo-stp_10.42.42.5(pid=8223): stderr: | �[0;m�[38;5;43m20221214102602831 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214102602831 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214102602831 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214102602832 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214102602832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214102602832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214102602832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:26:04.680119 run patchelf(pid=8226): Terminating (SIGINT) 10:26:04.852401 run patchelf(pid=8226): Terminated: ok {rc=0} 10:26:04.884024 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8223): Process ended prematurely: osmo-stp_10.42.42.5(pid=8223) [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8223)] [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 10:26:04.893455 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 10:26:04.954053 run osmo-hlr_10.42.42.2(pid=8220): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8220)] 10:26:05.003217 run osmo-hlr_10.42.42.2(pid=8220): stdout: | (launched: 2022-12-14_10:26:01.227192) 10:26:05.053412 run osmo-hlr_10.42.42.2(pid=8220): stderr: | �[0;m�[1;31m20221214102601595 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214102601595 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214102601595 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214102601595 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214102601595 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214102601595 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214102601618 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214102601635 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214102601635 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214102601635 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:26:05.096273 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8213): Terminating (SIGTERM) 10:26:05.136645 run iperf3-srv_10.42.42.10(pid=8214): Terminating (SIGTERM) 10:26:05.176880 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8215): Terminating (SIGTERM) 10:26:05.217064 run iperf3-srv_10.42.42.10(pid=8216): Terminating (SIGTERM) 10:26:05.257304 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8219): Terminating (SIGTERM) 10:26:05.297472 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8222): Terminating (SIGTERM) 10:26:05.337681 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8225): Terminating (SIGTERM) 10:26:05.346880 --- ParallelTerminationStrategy: PID 8213 died... 10:26:05.400804 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8213): Terminated: ok {rc=0} 10:26:05.410420 --- ParallelTerminationStrategy: PID 8214 died... 10:26:05.464040 run iperf3-srv_10.42.42.10(pid=8214): Terminated {rc=256} 10:26:05.473944 --- ParallelTerminationStrategy: PID 8215 died... 10:26:05.527419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8215): Terminated: ok {rc=0} 10:26:05.536856 --- ParallelTerminationStrategy: PID 8216 died... 10:26:05.590269 run iperf3-srv_10.42.42.10(pid=8216): Terminated {rc=256} 10:26:05.599800 --- ParallelTerminationStrategy: PID 8219 died... 10:26:05.653145 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8219): Terminated: ok {rc=0} 10:26:05.662634 --- ParallelTerminationStrategy: PID 8222 died... 10:26:05.716110 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8222): Terminated: ok {rc=0} 10:26:05.725768 --- ParallelTerminationStrategy: PID 8225 died... 10:26:05.779030 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8225): Terminated: ok {rc=0} 10:26:05.863434 bus /gobi_0: Setting Powered False 10:26:06.965799 bus /gobi_0: Setting Powered False 10:26:08.077852 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8223): Process ended prematurely: osmo-stp_10.42.42.5(pid=8223) [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8223)]