Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=18922): Process ended prematurely: osmo-stp_10.42.42.5(pid=18922) [trial-2404↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18922)]
Standard Output
---------------------------------------------- trial-2404 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:58:13.032012 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:13.043433 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:58:13.188622 tst cs_paging_gprs_active.py: using LAC 40739 11:58:13.316171 tst cs_paging_gprs_active.py: using RAC 194 11:58:13.440585 tst cs_paging_gprs_active.py: using CellId 40739 11:58:13.561548 tst cs_paging_gprs_active.py: using BVCI 40740 11:58:13.584729 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:13.595663 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:13.606449 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:13.617423 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:13.628336 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:13.639397 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:13.650529 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:13.661400 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:13.672468 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:58:13.795310 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:58:14.092196 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:58:14.228638 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:58:14.569385 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18912): Launched 11:58:14.853586 run iperf3-srv_10.42.42.10(pid=18913): Launched 11:58:15.054164 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:58:15.191092 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:58:15.531166 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18914): Launched 11:58:15.814998 run iperf3-srv_10.42.42.10(pid=18915): Launched 11:58:16.018943 tst cs_paging_gprs_active.py:38: start network... 11:58:16.157548 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:58:16.719960 run create_hlr_db(pid=18916): Launched 11:58:16.913154 bus /gobi_6: Setting Powered False 11:58:17.920012 run create_hlr_db(pid=18916): Terminated: ok {rc=0} 11:58:18.370753 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18918): Launched 11:58:18.700312 run osmo-hlr_10.42.42.2(pid=18919): Launched 11:58:18.819616 run osmo-stp_10.42.42.5: Starting osmo-stp 11:58:19.390773 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18921): Launched 11:58:19.719989 run osmo-stp_10.42.42.5(pid=18922): Launched 11:58:19.839268 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:58:20.413861 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18924): Launched 11:58:20.530919 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:58:20.816590 run patchelf(pid=18925): Launched 11:58:21.008629 run osmo-stp_10.42.42.5(pid=18922): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18922)] 11:58:21.149100 run osmo-stp_10.42.42.5(pid=18922): stdout: | (launched: 2022-12-14_11:58:19.557810) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:58:21.289771 run osmo-stp_10.42.42.5(pid=18922): stderr: | �[0;m�[38;5;43m20221214115819747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214115819747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214115819747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214115819747 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214115819748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214115819748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214115819748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:58:21.426680 run osmo-stp_10.42.42.5(pid=18922): stdout: | (launched: 2022-12-14_11:58:19.557810) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:58:21.561329 run osmo-stp_10.42.42.5(pid=18922): stderr: | �[0;m�[38;5;43m20221214115819747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214115819747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214115819747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214115819747 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214115819748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214115819748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214115819748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:58:21.717738 run patchelf(pid=18925): Terminating (SIGINT) 11:58:21.901930 run patchelf(pid=18925): Terminated: ok {rc=0} 11:58:21.935621 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18922): Process ended prematurely: osmo-stp_10.42.42.5(pid=18922) [trial-2404↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18922)] [trial-2404↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:58:21.945670 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 11:58:22.008254 run osmo-hlr_10.42.42.2(pid=18919): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18919)] 11:58:22.059389 run osmo-hlr_10.42.42.2(pid=18919): stdout: | (launched: 2022-12-14_11:58:18.538177) 11:58:22.111144 run osmo-hlr_10.42.42.2(pid=18919): stderr: | �[0;m�[1;31m20221214115818735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214115818735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214115818735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214115818736 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214115818736 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214115818736 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214115818748 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214115818757 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214115818757 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214115818757 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:58:22.155308 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18912): Terminating (SIGTERM) 11:58:22.196861 run iperf3-srv_10.42.42.10(pid=18913): Terminating (SIGTERM) 11:58:22.238822 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18914): Terminating (SIGTERM) 11:58:22.280378 run iperf3-srv_10.42.42.10(pid=18915): Terminating (SIGTERM) 11:58:22.322447 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18918): Terminating (SIGTERM) 11:58:22.365025 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18921): Terminating (SIGTERM) 11:58:22.406998 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18924): Terminating (SIGTERM) 11:58:22.416560 --- ParallelTerminationStrategy: PID 18912 died... 11:58:22.472412 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18912): Terminated: ok {rc=0} 11:58:22.482441 --- ParallelTerminationStrategy: PID 18913 died... 11:58:22.539402 run iperf3-srv_10.42.42.10(pid=18913): Terminated {rc=256} 11:58:22.549883 --- ParallelTerminationStrategy: PID 18914 died... 11:58:22.605644 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18914): Terminated: ok {rc=0} 11:58:22.615691 --- ParallelTerminationStrategy: PID 18915 died... 11:58:22.671455 run iperf3-srv_10.42.42.10(pid=18915): Terminated {rc=256} 11:58:22.681881 --- ParallelTerminationStrategy: PID 18918 died... 11:58:22.737561 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18918): Terminated: ok {rc=0} 11:58:22.747514 --- ParallelTerminationStrategy: PID 18921 died... 11:58:22.803284 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18921): Terminated: ok {rc=0} 11:58:22.813449 --- ParallelTerminationStrategy: PID 18924 died... 11:58:22.869126 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18924): Terminated: ok {rc=0} 11:58:22.955921 bus /gobi_0: Setting Powered False 11:58:24.062943 bus /gobi_0: Setting Powered False 11:58:25.175313 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18922): Process ended prematurely: osmo-stp_10.42.42.5(pid=18922) [trial-2404↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18922)]