Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=30222): Process ended prematurely: osmo-stp_10.42.42.5(pid=30222) [trial-2405↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30222)]
Standard Output
---------------------------------------------- trial-2405 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 13:56:37.765070 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:56:37.775607 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 13:56:37.898441 tst cs_paging_gprs_active.py: using LAC 41366 13:56:38.014781 tst cs_paging_gprs_active.py: using RAC 56 13:56:38.132255 tst cs_paging_gprs_active.py: using CellId 41366 13:56:38.248616 tst cs_paging_gprs_active.py: using BVCI 41367 13:56:38.271786 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:56:38.282465 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:56:38.292829 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:56:38.303233 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:56:38.313708 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:56:38.323942 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:56:38.334922 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:56:38.345316 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:56:38.355782 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 13:56:38.469883 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 13:56:38.764855 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:56:38.901591 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:56:39.237404 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30212): Launched 13:56:39.515632 run iperf3-srv_10.42.42.10(pid=30213): Launched 13:56:39.714679 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:56:39.850699 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:56:40.187524 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30214): Launched 13:56:40.465643 run iperf3-srv_10.42.42.10(pid=30215): Launched 13:56:40.664601 tst cs_paging_gprs_active.py:38: start network... 13:56:40.800386 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:56:41.310818 run create_hlr_db(pid=30216): Launched 13:56:41.498249 bus /sierra_2: Setting Powered False 13:56:42.520497 run create_hlr_db(pid=30216): Terminated: ok {rc=0} 13:56:42.926546 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30218): Launched 13:56:43.229373 run osmo-hlr_10.42.42.2(pid=30219): Launched 13:56:43.341275 run osmo-stp_10.42.42.5: Starting osmo-stp 13:56:43.864678 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30221): Launched 13:56:44.168363 run osmo-stp_10.42.42.5(pid=30222): Launched 13:56:44.278797 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:56:44.806163 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30224): Launched 13:56:44.913910 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:56:45.178443 run patchelf(pid=30225): Launched 13:56:45.356125 run osmo-stp_10.42.42.5(pid=30222): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30222)] 13:56:45.486188 run osmo-stp_10.42.42.5(pid=30222): stdout: | (launched: 2022-12-14_13:56:44.018599) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:56:45.616628 run osmo-stp_10.42.42.5(pid=30222): stderr: | �[0;m�[38;5;43m20221214135644189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214135644189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214135644189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214135644189 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214135644192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214135644192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214135644192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:56:45.742232 run osmo-stp_10.42.42.5(pid=30222): stdout: | (launched: 2022-12-14_13:56:44.018599) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:56:45.881719 run osmo-stp_10.42.42.5(pid=30222): stderr: | �[0;m�[38;5;43m20221214135644189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214135644189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214135644189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214135644189 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214135644192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214135644192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214135644192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:56:46.049405 run patchelf(pid=30225): Terminating (SIGINT) 13:56:46.237215 run patchelf(pid=30225): Terminated: ok {rc=0} 13:56:46.272228 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30222): Process ended prematurely: osmo-stp_10.42.42.5(pid=30222) [trial-2405↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30222)] [trial-2405↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 13:56:46.283175 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 13:56:46.350277 run osmo-hlr_10.42.42.2(pid=30219): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30219)] 13:56:46.404193 run osmo-hlr_10.42.42.2(pid=30219): stdout: | (launched: 2022-12-14_13:56:43.080376) 13:56:46.459718 run osmo-hlr_10.42.42.2(pid=30219): stderr: | �[0;m�[1;31m20221214135643259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214135643259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214135643259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214135643259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214135643259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214135643259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214135643271 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214135643280 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214135643280 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214135643280 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:56:46.506333 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30212): Terminating (SIGTERM) 13:56:46.552800 run iperf3-srv_10.42.42.10(pid=30213): Terminating (SIGTERM) 13:56:46.598034 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30214): Terminating (SIGTERM) 13:56:46.643111 run iperf3-srv_10.42.42.10(pid=30215): Terminating (SIGTERM) 13:56:46.687860 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30218): Terminating (SIGTERM) 13:56:46.733734 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30221): Terminating (SIGTERM) 13:56:46.780072 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30224): Terminating (SIGTERM) 13:56:46.790839 --- ParallelTerminationStrategy: PID 30212 died... 13:56:46.852583 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30212): Terminated: ok {rc=0} 13:56:46.864691 --- ParallelTerminationStrategy: PID 30213 died... 13:56:46.922865 run iperf3-srv_10.42.42.10(pid=30213): Terminated {rc=256} 13:56:46.934720 --- ParallelTerminationStrategy: PID 30214 died... 13:56:46.992621 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30214): Terminated: ok {rc=0} 13:56:47.004877 --- ParallelTerminationStrategy: PID 30215 died... 13:56:47.063931 run iperf3-srv_10.42.42.10(pid=30215): Terminated {rc=256} 13:56:47.074974 --- ParallelTerminationStrategy: PID 30218 died... 13:56:47.133796 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30218): Terminated: ok {rc=0} 13:56:47.144698 --- ParallelTerminationStrategy: PID 30221 died... 13:56:47.204022 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30221): Terminated: ok {rc=0} 13:56:47.215720 --- ParallelTerminationStrategy: PID 30224 died... 13:56:47.273445 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30224): Terminated: ok {rc=0} 13:56:47.361522 bus /gobi_0: Setting Powered False 13:56:48.467064 bus /gobi_0: Setting Powered False 13:56:49.575632 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30222): Process ended prematurely: osmo-stp_10.42.42.5(pid=30222) [trial-2405↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30222)]