Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=24707): Process ended prematurely: osmo-stp_10.42.42.5(pid=24707) [trial-2405↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24707)]
Standard Output
---------------------------------------------- trial-2405 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 13:01:09.989265 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:10.000070 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:01:10.145454 tst cs_paging_gprs_active.py: using LAC 41070 13:01:10.261415 tst cs_paging_gprs_active.py: using RAC 15 13:01:10.381825 tst cs_paging_gprs_active.py: using CellId 41070 13:01:10.497975 tst cs_paging_gprs_active.py: using BVCI 41071 13:01:10.520851 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:10.531525 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:10.542098 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:10.552368 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:10.563261 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:10.574351 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:10.585313 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:10.595851 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:10.606808 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:01:10.727716 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:01:11.006081 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:01:11.131674 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:01:11.443818 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24697): Launched 13:01:11.702435 run iperf3-srv_10.42.42.10(pid=24698): Launched 13:01:11.886769 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:01:12.011865 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:01:12.323057 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24699): Launched 13:01:12.580446 run iperf3-srv_10.42.42.10(pid=24700): Launched 13:01:12.763370 tst cs_paging_gprs_active.py:38: start network... 13:01:12.888326 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:01:13.368490 run create_hlr_db(pid=24701): Launched 13:01:13.541127 bus /gobi_6: Setting Powered False 13:01:14.563429 run create_hlr_db(pid=24701): Terminated: ok {rc=0} 13:01:14.964175 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24703): Launched 13:01:15.264926 run osmo-hlr_10.42.42.2(pid=24704): Launched 13:01:15.375836 run osmo-stp_10.42.42.5: Starting osmo-stp 13:01:15.899538 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24706): Launched 13:01:16.348729 run osmo-stp_10.42.42.5(pid=24707): Launched 13:01:16.532374 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:01:17.139837 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24709): Launched 13:01:17.258425 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:01:17.540485 run patchelf(pid=24710): Launched 13:01:17.730691 run osmo-stp_10.42.42.5(pid=24707): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24707)] 13:01:17.870384 run osmo-stp_10.42.42.5(pid=24707): stdout: | (launched: 2022-12-14_13:01:16.078408) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:01:18.010073 run osmo-stp_10.42.42.5(pid=24707): stderr: | �[0;m�[38;5;43m20221214130116392 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214130116392 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214130116392 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214130116393 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214130116393 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214130116393 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214130116393 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:01:18.144829 run osmo-stp_10.42.42.5(pid=24707): stdout: | (launched: 2022-12-14_13:01:16.078408) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:01:18.278717 run osmo-stp_10.42.42.5(pid=24707): stderr: | �[0;m�[38;5;43m20221214130116392 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214130116392 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214130116392 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214130116393 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214130116393 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214130116393 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214130116393 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:01:18.434126 run patchelf(pid=24710): Terminating (SIGINT) 13:01:18.616048 run patchelf(pid=24710): Terminated: ok {rc=0} 13:01:18.649462 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24707): Process ended prematurely: osmo-stp_10.42.42.5(pid=24707) [trial-2405↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24707)] [trial-2405↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 13:01:18.659348 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 13:01:18.722254 run osmo-hlr_10.42.42.2(pid=24704): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24704)] 13:01:18.773388 run osmo-hlr_10.42.42.2(pid=24704): stdout: | (launched: 2022-12-14_13:01:15.117076) 13:01:18.825249 run osmo-hlr_10.42.42.2(pid=24704): stderr: | �[0;m�[1;31m20221214130115295 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214130115296 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214130115296 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214130115296 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214130115296 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214130115296 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214130115307 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214130115318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214130115318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214130115318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:01:18.869816 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24697): Terminating (SIGTERM) 13:01:18.912115 run iperf3-srv_10.42.42.10(pid=24698): Terminating (SIGTERM) 13:01:18.954152 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24699): Terminating (SIGTERM) 13:01:18.996395 run iperf3-srv_10.42.42.10(pid=24700): Terminating (SIGTERM) 13:01:19.038794 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24703): Terminating (SIGTERM) 13:01:19.081177 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24706): Terminating (SIGTERM) 13:01:19.123529 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24709): Terminating (SIGTERM) 13:01:19.133218 --- ParallelTerminationStrategy: PID 24697 died... 13:01:19.189352 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24697): Terminated: ok {rc=0} 13:01:19.199667 --- ParallelTerminationStrategy: PID 24698 died... 13:01:19.255471 run iperf3-srv_10.42.42.10(pid=24698): Terminated {rc=256} 13:01:19.265392 --- ParallelTerminationStrategy: PID 24699 died... 13:01:19.321109 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24699): Terminated: ok {rc=0} 13:01:19.330983 --- ParallelTerminationStrategy: PID 24700 died... 13:01:19.386622 run iperf3-srv_10.42.42.10(pid=24700): Terminated {rc=256} 13:01:19.396581 --- ParallelTerminationStrategy: PID 24703 died... 13:01:19.452081 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24703): Terminated: ok {rc=0} 13:01:19.461989 --- ParallelTerminationStrategy: PID 24706 died... 13:01:19.517566 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24706): Terminated: ok {rc=0} 13:01:19.527458 --- ParallelTerminationStrategy: PID 24709 died... 13:01:19.583083 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24709): Terminated: ok {rc=0} 13:01:19.668668 bus /gobi_0: Setting Powered False 13:01:20.769186 bus /gobi_0: Setting Powered False 13:01:21.875940 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24707): Process ended prematurely: osmo-stp_10.42.42.5(pid=24707) [trial-2405↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24707)]