Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=24638): Process ended prematurely: osmo-stp_10.42.42.5(pid=24638) [trial-2405↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24638)]
Standard Output
---------------------------------------------- trial-2405 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:00:10.480722 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:10.491573 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:00:10.623009 tst cs_paging_gprs_active.py: using LAC 41065 13:00:10.750491 tst cs_paging_gprs_active.py: using RAC 10 13:00:10.873521 tst cs_paging_gprs_active.py: using CellId 41065 13:00:10.992720 tst cs_paging_gprs_active.py: using BVCI 41066 13:00:11.015963 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:11.026799 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:11.037508 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:11.048084 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:11.059226 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:11.070402 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:11.082004 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:11.093020 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:00:11.104195 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:00:11.225553 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:00:11.521195 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:00:11.657975 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:00:11.993479 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24628): Launched 13:00:12.271989 run iperf3-srv_10.42.42.10(pid=24629): Launched 13:00:12.472092 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:00:12.608492 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:00:12.944123 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24630): Launched 13:00:13.223319 run iperf3-srv_10.42.42.10(pid=24631): Launched 13:00:13.422978 tst cs_paging_gprs_active.py:38: start network... 13:00:13.559276 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:00:14.068878 run create_hlr_db(pid=24632): Launched 13:00:14.257177 bus /gobi_6: Setting Powered False 13:00:15.278891 run create_hlr_db(pid=24632): Terminated: ok {rc=0} 13:00:15.686009 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24634): Launched 13:00:16.085264 run osmo-hlr_10.42.42.2(pid=24635): Launched 13:00:16.264257 run osmo-stp_10.42.42.5: Starting osmo-stp 13:00:16.936140 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24637): Launched 13:00:17.273271 run osmo-stp_10.42.42.5(pid=24638): Launched 13:00:17.383176 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:00:17.908585 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24640): Launched 13:00:18.015739 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:00:18.277939 run patchelf(pid=24641): Launched 13:00:18.454072 run osmo-stp_10.42.42.5(pid=24638): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24638)] 13:00:18.582603 run osmo-stp_10.42.42.5(pid=24638): stdout: | (launched: 2022-12-14_13:00:17.107319) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:00:18.711727 run osmo-stp_10.42.42.5(pid=24638): stderr: | �[0;m�[38;5;43m20221214130017293 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214130017293 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214130017293 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214130017294 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214130017294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214130017294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214130017294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:00:18.836410 run osmo-stp_10.42.42.5(pid=24638): stdout: | (launched: 2022-12-14_13:00:17.107319) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:00:18.959975 run osmo-stp_10.42.42.5(pid=24638): stderr: | �[0;m�[38;5;43m20221214130017293 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214130017293 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214130017293 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214130017294 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214130017294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214130017294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214130017294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:00:19.103095 run patchelf(pid=24641): Terminating (SIGINT) 13:00:19.271950 run patchelf(pid=24641): Terminated: ok {rc=0} 13:00:19.303020 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24638): Process ended prematurely: osmo-stp_10.42.42.5(pid=24638) [trial-2405↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24638)] [trial-2405↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:00:19.312100 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 13:00:19.372611 run osmo-hlr_10.42.42.2(pid=24635): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24635)] 13:00:19.421503 run osmo-hlr_10.42.42.2(pid=24635): stdout: | (launched: 2022-12-14_13:00:15.847706) 13:00:19.470732 run osmo-hlr_10.42.42.2(pid=24635): stderr: | �[0;m�[1;31m20221214130016222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214130016222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214130016222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214130016222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214130016222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214130016222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214130016236 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214130016252 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214130016252 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214130016252 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:00:19.512625 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24628): Terminating (SIGTERM) 13:00:19.551899 run iperf3-srv_10.42.42.10(pid=24629): Terminating (SIGTERM) 13:00:19.591180 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24630): Terminating (SIGTERM) 13:00:19.630464 run iperf3-srv_10.42.42.10(pid=24631): Terminating (SIGTERM) 13:00:19.669689 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24634): Terminating (SIGTERM) 13:00:19.709037 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24637): Terminating (SIGTERM) 13:00:19.748187 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24640): Terminating (SIGTERM) 13:00:19.757359 --- ParallelTerminationStrategy: PID 24628 died... 13:00:19.810441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24628): Terminated: ok {rc=0} 13:00:19.820310 --- ParallelTerminationStrategy: PID 24629 died... 13:00:19.872774 run iperf3-srv_10.42.42.10(pid=24629): Terminated {rc=256} 13:00:19.882314 --- ParallelTerminationStrategy: PID 24630 died... 13:00:19.934774 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24630): Terminated: ok {rc=0} 13:00:19.944180 --- ParallelTerminationStrategy: PID 24631 died... 13:00:19.996331 run iperf3-srv_10.42.42.10(pid=24631): Terminated {rc=256} 13:00:20.005825 --- ParallelTerminationStrategy: PID 24634 died... 13:00:20.057930 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24634): Terminated: ok {rc=0} 13:00:20.067284 --- ParallelTerminationStrategy: PID 24637 died... 13:00:20.119619 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24637): Terminated: ok {rc=0} 13:00:20.129143 --- ParallelTerminationStrategy: PID 24640 died... 13:00:20.181419 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24640): Terminated: ok {rc=0} 13:00:20.269067 bus /gobi_0: Setting Powered False 13:00:21.373022 bus /gobi_0: Setting Powered False 13:00:22.483240 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24638): Process ended prematurely: osmo-stp_10.42.42.5(pid=24638) [trial-2405↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24638)]