Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=2802): Process ended prematurely: osmo-stp_10.42.42.5(pid=2802) [trial-2406↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2802)]
Standard Output
---------------------------------------------- trial-2406 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 14:45:08.299365 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:45:08.310729 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 14:45:08.479723 tst cs_paging_gprs_active.py: using LAC 41619 14:45:08.601761 tst cs_paging_gprs_active.py: using RAC 54 14:45:08.719856 tst cs_paging_gprs_active.py: using CellId 41619 14:45:08.837483 tst cs_paging_gprs_active.py: using BVCI 41620 14:45:08.860609 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:45:08.871369 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:45:08.882075 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:45:08.892755 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:45:08.904188 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:45:08.915709 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:45:08.927208 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:45:08.938490 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:45:08.950009 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 14:45:09.067604 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 14:45:09.345378 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 14:45:09.471726 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:45:09.785255 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2792): Launched 14:45:10.046633 run iperf3-srv_10.42.42.10(pid=2793): Launched 14:45:10.230951 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 14:45:10.356932 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:45:10.671199 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2794): Launched 14:45:10.931908 run iperf3-srv_10.42.42.10(pid=2795): Launched 14:45:11.115390 tst cs_paging_gprs_active.py:38: start network... 14:45:11.241171 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:45:11.718461 run create_hlr_db(pid=2796): Launched 14:45:11.892810 bus /gobi_6: Setting Powered False 14:45:12.914249 run create_hlr_db(pid=2796): Terminated: ok {rc=0} 14:45:13.347552 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2798): Launched 14:45:13.673376 run osmo-hlr_10.42.42.2(pid=2799): Launched 14:45:13.797086 run osmo-stp_10.42.42.5: Starting osmo-stp 14:45:14.363188 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2801): Launched 14:45:14.690054 run osmo-stp_10.42.42.5(pid=2802): Launched 14:45:14.807449 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:45:15.374930 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2804): Launched 14:45:15.490467 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:45:15.774819 run patchelf(pid=2805): Launched 14:45:15.983609 run osmo-stp_10.42.42.5(pid=2802): ERR: Terminated: ERROR {rc=1} [trial-2406↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2802)] 14:45:16.117404 run osmo-stp_10.42.42.5(pid=2802): stdout: | (launched: 2022-12-14_14:45:14.528264) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:45:16.253461 run osmo-stp_10.42.42.5(pid=2802): stderr: | �[0;m�[38;5;43m20221214144514720 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214144514720 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214144514720 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214144514721 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214144514721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214144514721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214144514721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:45:16.385177 run osmo-stp_10.42.42.5(pid=2802): stdout: | (launched: 2022-12-14_14:45:14.528264) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:45:16.514753 run osmo-stp_10.42.42.5(pid=2802): stderr: | �[0;m�[38;5;43m20221214144514720 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214144514720 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214144514720 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214144514721 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214144514721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214144514721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214144514721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:45:16.667277 run patchelf(pid=2805): Terminating (SIGINT) 14:45:16.845831 run patchelf(pid=2805): Terminated: ok {rc=0} 14:45:16.878796 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2802): Process ended prematurely: osmo-stp_10.42.42.5(pid=2802) [trial-2406↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2802)] [trial-2406↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 14:45:16.889005 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 14:45:16.953745 run osmo-hlr_10.42.42.2(pid=2799): ERR: Terminated: ERROR {rc=237} [trial-2406↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2799)] 14:45:17.006891 run osmo-hlr_10.42.42.2(pid=2799): stdout: | (launched: 2022-12-14_14:45:13.513138) 14:45:17.059963 run osmo-hlr_10.42.42.2(pid=2799): stderr: | �[0;m�[1;31m20221214144513714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214144513714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214144513714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214144513714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214144513714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214144513714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214144513726 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214144513735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214144513735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214144513735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:45:17.106078 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2792): Terminating (SIGTERM) 14:45:17.148741 run iperf3-srv_10.42.42.10(pid=2793): Terminating (SIGTERM) 14:45:17.192444 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2794): Terminating (SIGTERM) 14:45:17.234698 run iperf3-srv_10.42.42.10(pid=2795): Terminating (SIGTERM) 14:45:17.276225 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2798): Terminating (SIGTERM) 14:45:17.317568 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2801): Terminating (SIGTERM) 14:45:17.359973 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2804): Terminating (SIGTERM) 14:45:17.369072 --- ParallelTerminationStrategy: PID 2792 died... 14:45:17.423707 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2792): Terminated: ok {rc=0} 14:45:17.433463 --- ParallelTerminationStrategy: PID 2793 died... 14:45:17.487444 run iperf3-srv_10.42.42.10(pid=2793): Terminated {rc=256} 14:45:17.497091 --- ParallelTerminationStrategy: PID 2794 died... 14:45:17.551295 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2794): Terminated: ok {rc=0} 14:45:17.561082 --- ParallelTerminationStrategy: PID 2795 died... 14:45:17.615203 run iperf3-srv_10.42.42.10(pid=2795): Terminated {rc=256} 14:45:17.624683 --- ParallelTerminationStrategy: PID 2798 died... 14:45:17.678779 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2798): Terminated: ok {rc=0} 14:45:17.688471 --- ParallelTerminationStrategy: PID 2801 died... 14:45:17.742414 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2801): Terminated: ok {rc=0} 14:45:17.752064 --- ParallelTerminationStrategy: PID 2804 died... 14:45:17.806184 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2804): Terminated: ok {rc=0} 14:45:17.890577 bus /gobi_0: Setting Powered False 14:45:18.997257 bus /gobi_0: Setting Powered False 14:45:20.108502 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2802): Process ended prematurely: osmo-stp_10.42.42.5(pid=2802) [trial-2406↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2802)]