Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=2876): Process ended prematurely: osmo-stp_10.42.42.5(pid=2876) [trial-2406↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2876)]
Standard Output
---------------------------------------------- trial-2406 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 14:46:07.961436 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:46:07.972532 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 14:46:08.137806 tst cs_paging_gprs_active.py: using LAC 41624 14:46:08.268653 tst cs_paging_gprs_active.py: using RAC 59 14:46:08.394618 tst cs_paging_gprs_active.py: using CellId 41624 14:46:08.520175 tst cs_paging_gprs_active.py: using BVCI 41625 14:46:08.545021 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:46:08.556244 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:46:08.567401 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:46:08.578990 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:46:08.590004 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:46:08.601114 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:46:08.612148 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:46:08.623138 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:46:08.634514 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 14:46:08.752339 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 14:46:09.044614 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 14:46:09.179814 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:46:09.515327 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2866): Launched 14:46:09.795006 run iperf3-srv_10.42.42.10(pid=2867): Launched 14:46:09.993365 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 14:46:10.127856 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:46:10.463148 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2868): Launched 14:46:10.741419 run iperf3-srv_10.42.42.10(pid=2869): Launched 14:46:10.938695 tst cs_paging_gprs_active.py:38: start network... 14:46:11.073805 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:46:11.593216 run create_hlr_db(pid=2870): Launched 14:46:11.781282 bus /gobi_6: Setting Powered False 14:46:12.801444 run create_hlr_db(pid=2870): Terminated: ok {rc=0} 14:46:13.231535 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2872): Launched 14:46:13.556612 run osmo-hlr_10.42.42.2(pid=2873): Launched 14:46:13.678408 run osmo-stp_10.42.42.5: Starting osmo-stp 14:46:14.240414 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2875): Launched 14:46:14.566251 run osmo-stp_10.42.42.5(pid=2876): Launched 14:46:14.683899 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:46:15.249494 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2878): Launched 14:46:15.365349 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:46:15.648858 run patchelf(pid=2879): Launched 14:46:15.844810 run osmo-stp_10.42.42.5(pid=2876): ERR: Terminated: ERROR {rc=1} [trial-2406↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2876)] 14:46:15.999350 run osmo-stp_10.42.42.5(pid=2876): stdout: | (launched: 2022-12-14_14:46:14.406512) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:46:16.151261 run osmo-stp_10.42.42.5(pid=2876): stderr: | �[0;m�[38;5;43m20221214144614600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214144614600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214144614601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214144614601 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214144614601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214144614602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214144614602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:46:16.282054 run osmo-stp_10.42.42.5(pid=2876): stdout: | (launched: 2022-12-14_14:46:14.406512) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:46:16.414446 run osmo-stp_10.42.42.5(pid=2876): stderr: | �[0;m�[38;5;43m20221214144614600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214144614600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214144614601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214144614601 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214144614601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214144614602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214144614602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:46:16.565981 run patchelf(pid=2879): Terminating (SIGINT) 14:46:16.745048 run patchelf(pid=2879): Terminated: ok {rc=0} 14:46:16.779439 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2876): Process ended prematurely: osmo-stp_10.42.42.5(pid=2876) [trial-2406↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2876)] [trial-2406↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 14:46:16.789919 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 14:46:16.854039 run osmo-hlr_10.42.42.2(pid=2873): ERR: Terminated: ERROR {rc=237} [trial-2406↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2873)] 14:46:16.906177 run osmo-hlr_10.42.42.2(pid=2873): stdout: | (launched: 2022-12-14_14:46:13.397315) 14:46:16.959138 run osmo-hlr_10.42.42.2(pid=2873): stderr: | �[0;m�[1;31m20221214144613598 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214144613598 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214144613599 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214144613599 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214144613599 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214144613599 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214144613611 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214144613619 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214144613619 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214144613619 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:46:17.005348 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2866): Terminating (SIGTERM) 14:46:17.050684 run iperf3-srv_10.42.42.10(pid=2867): Terminating (SIGTERM) 14:46:17.095249 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2868): Terminating (SIGTERM) 14:46:17.138521 run iperf3-srv_10.42.42.10(pid=2869): Terminating (SIGTERM) 14:46:17.183959 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2872): Terminating (SIGTERM) 14:46:17.227180 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2875): Terminating (SIGTERM) 14:46:17.271787 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2878): Terminating (SIGTERM) 14:46:17.283292 --- ParallelTerminationStrategy: PID 2866 died... 14:46:17.340514 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2866): Terminated: ok {rc=0} 14:46:17.350439 --- ParallelTerminationStrategy: PID 2867 died... 14:46:17.405575 run iperf3-srv_10.42.42.10(pid=2867): Terminated {rc=256} 14:46:17.415429 --- ParallelTerminationStrategy: PID 2868 died... 14:46:17.470521 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2868): Terminated: ok {rc=0} 14:46:17.480356 --- ParallelTerminationStrategy: PID 2869 died... 14:46:17.535303 run iperf3-srv_10.42.42.10(pid=2869): Terminated {rc=256} 14:46:17.545299 --- ParallelTerminationStrategy: PID 2872 died... 14:46:17.600084 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2872): Terminated: ok {rc=0} 14:46:17.609968 --- ParallelTerminationStrategy: PID 2875 died... 14:46:17.665020 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2875): Terminated: ok {rc=0} 14:46:17.674932 --- ParallelTerminationStrategy: PID 2878 died... 14:46:17.730356 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2878): Terminated: ok {rc=0} 14:46:17.816903 bus /gobi_0: Setting Powered False 14:46:18.922821 bus /gobi_0: Setting Powered False 14:46:20.030270 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2876): Process ended prematurely: osmo-stp_10.42.42.5(pid=2876) [trial-2406↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2876)]