Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=3351): Process ended prematurely: osmo-stp_10.42.42.5(pid=3351) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3351)]
Standard Output
---------------------------------------------- trial-2406 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 14:52:59.602067 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:52:59.613368 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 14:52:59.754231 tst cs_paging_gprs_active.py: using LAC 41661 14:52:59.873623 tst cs_paging_gprs_active.py: using RAC 96 14:52:59.998586 tst cs_paging_gprs_active.py: using CellId 41661 14:53:00.121111 tst cs_paging_gprs_active.py: using BVCI 41662 14:53:00.144114 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:53:00.155251 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:53:00.166024 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:53:00.176746 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:53:00.187711 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:53:00.198910 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:53:00.210361 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:53:00.221415 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:53:00.232561 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 14:53:00.351706 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 14:53:00.630103 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 14:53:00.755802 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:53:01.096130 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3341): Launched 14:53:01.380459 run iperf3-srv_10.42.42.10(pid=3342): Launched 14:53:01.567226 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 14:53:01.694951 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:53:02.026070 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3343): Launched 14:53:02.308559 run iperf3-srv_10.42.42.10(pid=3344): Launched 14:53:02.492389 tst cs_paging_gprs_active.py:38: start network... 14:53:02.618710 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:53:03.096361 run create_hlr_db(pid=3345): Launched 14:53:03.270598 bus /gobi_6: Setting Powered False 14:53:04.291359 run create_hlr_db(pid=3345): Terminated: ok {rc=0} 14:53:04.694860 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3347): Launched 14:53:04.998474 run osmo-hlr_10.42.42.2(pid=3348): Launched 14:53:05.113760 run osmo-stp_10.42.42.5: Starting osmo-stp 14:53:05.638263 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3350): Launched 14:53:05.940744 run osmo-stp_10.42.42.5(pid=3351): Launched 14:53:06.050614 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:53:06.576190 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3353): Launched 14:53:06.683540 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:53:06.947927 run patchelf(pid=3354): Launched 14:53:07.126023 run osmo-stp_10.42.42.5(pid=3351): ERR: Terminated: ERROR {rc=1} [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3351)] 14:53:07.255427 run osmo-stp_10.42.42.5(pid=3351): stdout: | (launched: 2022-12-14_14:53:05.791279) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:53:07.384473 run osmo-stp_10.42.42.5(pid=3351): stderr: | �[0;m�[38;5;43m20221214145305961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214145305961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214145305961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214145305962 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214145305962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214145305962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214145305962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:53:07.510109 run osmo-stp_10.42.42.5(pid=3351): stdout: | (launched: 2022-12-14_14:53:05.791279) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:53:07.634391 run osmo-stp_10.42.42.5(pid=3351): stderr: | �[0;m�[38;5;43m20221214145305961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214145305961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214145305961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214145305962 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214145305962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214145305962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214145305962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:53:07.779304 run patchelf(pid=3354): Terminating (SIGINT) 14:53:07.948815 run patchelf(pid=3354): Terminated: ok {rc=0} 14:53:07.979848 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3351): Process ended prematurely: osmo-stp_10.42.42.5(pid=3351) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3351)] [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 14:53:07.989070 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 14:53:08.050110 run osmo-hlr_10.42.42.2(pid=3348): ERR: Terminated: ERROR {rc=237} [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3348)] 14:53:08.099266 run osmo-hlr_10.42.42.2(pid=3348): stdout: | (launched: 2022-12-14_14:53:04.848516) 14:53:08.149077 run osmo-hlr_10.42.42.2(pid=3348): stderr: | �[0;m�[1;31m20221214145305024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214145305024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214145305024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214145305024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214145305024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214145305024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214145305037 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214145305045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214145305045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214145305045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:53:08.192065 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3341): Terminating (SIGTERM) 14:53:08.232531 run iperf3-srv_10.42.42.10(pid=3342): Terminating (SIGTERM) 14:53:08.273288 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3343): Terminating (SIGTERM) 14:53:08.313645 run iperf3-srv_10.42.42.10(pid=3344): Terminating (SIGTERM) 14:53:08.353967 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3347): Terminating (SIGTERM) 14:53:08.394307 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3350): Terminating (SIGTERM) 14:53:08.434368 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3353): Terminating (SIGTERM) 14:53:08.443563 --- ParallelTerminationStrategy: PID 3341 died... 14:53:08.497560 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3341): Terminated: ok {rc=0} 14:53:08.507161 --- ParallelTerminationStrategy: PID 3342 died... 14:53:08.561153 run iperf3-srv_10.42.42.10(pid=3342): Terminated {rc=256} 14:53:08.570713 --- ParallelTerminationStrategy: PID 3343 died... 14:53:08.624861 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3343): Terminated: ok {rc=0} 14:53:08.634429 --- ParallelTerminationStrategy: PID 3344 died... 14:53:08.687837 run iperf3-srv_10.42.42.10(pid=3344): Terminated {rc=256} 14:53:08.697503 --- ParallelTerminationStrategy: PID 3347 died... 14:53:08.751045 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3347): Terminated: ok {rc=0} 14:53:08.760622 --- ParallelTerminationStrategy: PID 3350 died... 14:53:08.814346 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3350): Terminated: ok {rc=0} 14:53:08.823787 --- ParallelTerminationStrategy: PID 3353 died... 14:53:08.877709 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3353): Terminated: ok {rc=0} 14:53:08.966112 bus /gobi_0: Setting Powered False 14:53:10.069873 bus /gobi_0: Setting Powered False 14:53:11.180551 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3351): Process ended prematurely: osmo-stp_10.42.42.5(pid=3351) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3351)]