Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=2663): Process ended prematurely: osmo-stp_10.42.42.5(pid=2663) [trial-2406↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2663)]
Standard Output
---------------------------------------------- trial-2406 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 14:43:09.169905 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 14:43:09.180363 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 14:43:09.321678 tst cs_paging_gprs_active.py: using LAC 41609 14:43:09.449815 tst cs_paging_gprs_active.py: using RAC 44 14:43:09.575844 tst cs_paging_gprs_active.py: using CellId 41609 14:43:09.695958 tst cs_paging_gprs_active.py: using BVCI 41610 14:43:09.719421 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 14:43:09.730119 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 14:43:09.740621 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 14:43:09.751080 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 14:43:09.762064 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 14:43:09.772929 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 14:43:09.783698 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 14:43:09.794314 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 14:43:09.805434 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 14:43:09.926120 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 14:43:10.206203 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 14:43:10.333624 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:43:10.650451 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2653): Launched 14:43:10.914069 run iperf3-srv_10.42.42.10(pid=2654): Launched 14:43:11.099260 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 14:43:11.225877 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:43:11.546806 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2655): Launched 14:43:11.808490 run iperf3-srv_10.42.42.10(pid=2656): Launched 14:43:11.992492 tst cs_paging_gprs_active.py:38: start network... 14:43:12.118688 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:43:12.597028 run create_hlr_db(pid=2657): Launched 14:43:12.771053 bus /sierra_2: Setting Powered False 14:43:13.792293 run create_hlr_db(pid=2657): Terminated: ok {rc=0} 14:43:14.194843 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2659): Launched 14:43:14.500752 run osmo-hlr_10.42.42.2(pid=2660): Launched 14:43:14.620474 run osmo-stp_10.42.42.5: Starting osmo-stp 14:43:15.152296 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2662): Launched 14:43:15.456434 run osmo-stp_10.42.42.5(pid=2663): Launched 14:43:15.566957 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:43:16.152155 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2665): Launched 14:43:16.273601 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:43:16.579863 run patchelf(pid=2666): Launched 14:43:16.797230 run osmo-stp_10.42.42.5(pid=2663): ERR: Terminated: ERROR {rc=1} [trial-2406↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2663)] 14:43:16.944279 run osmo-stp_10.42.42.5(pid=2663): stdout: | (launched: 2022-12-14_14:43:15.306139) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:43:17.088081 run osmo-stp_10.42.42.5(pid=2663): stderr: | �[0;m�[38;5;43m20221214144315477 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214144315477 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214144315477 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214144315477 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214144315478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214144315478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214144315478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:43:17.225868 run osmo-stp_10.42.42.5(pid=2663): stdout: | (launched: 2022-12-14_14:43:15.306139) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:43:17.359205 run osmo-stp_10.42.42.5(pid=2663): stderr: | �[0;m�[38;5;43m20221214144315477 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214144315477 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214144315477 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214144315477 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214144315478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214144315478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214144315478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:43:17.515420 run patchelf(pid=2666): Terminating (SIGINT) 14:43:17.698138 run patchelf(pid=2666): Terminated: ok {rc=0} 14:43:17.731891 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2663): Process ended prematurely: osmo-stp_10.42.42.5(pid=2663) [trial-2406↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2663)] [trial-2406↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 14:43:17.741776 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 14:43:17.804863 run osmo-hlr_10.42.42.2(pid=2660): ERR: Terminated: ERROR {rc=237} [trial-2406↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2660)] 14:43:17.856565 run osmo-hlr_10.42.42.2(pid=2660): stdout: | (launched: 2022-12-14_14:43:14.349731) 14:43:17.908662 run osmo-hlr_10.42.42.2(pid=2660): stderr: | �[0;m�[1;31m20221214144314524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214144314524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214144314524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214144314524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214144314524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214144314524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214144314536 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214144314545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214144314545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214144314545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:43:17.953454 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2653): Terminating (SIGTERM) 14:43:17.996372 run iperf3-srv_10.42.42.10(pid=2654): Terminating (SIGTERM) 14:43:18.038855 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2655): Terminating (SIGTERM) 14:43:18.081121 run iperf3-srv_10.42.42.10(pid=2656): Terminating (SIGTERM) 14:43:18.123490 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2659): Terminating (SIGTERM) 14:43:18.166211 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2662): Terminating (SIGTERM) 14:43:18.208369 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2665): Terminating (SIGTERM) 14:43:18.218464 --- ParallelTerminationStrategy: PID 2653 died... 14:43:18.275089 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2653): Terminated: ok {rc=0} 14:43:18.285606 --- ParallelTerminationStrategy: PID 2654 died... 14:43:18.341693 run iperf3-srv_10.42.42.10(pid=2654): Terminated {rc=256} 14:43:18.351620 --- ParallelTerminationStrategy: PID 2655 died... 14:43:18.407583 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2655): Terminated: ok {rc=0} 14:43:18.417755 --- ParallelTerminationStrategy: PID 2656 died... 14:43:18.473391 run iperf3-srv_10.42.42.10(pid=2656): Terminated {rc=256} 14:43:18.483515 --- ParallelTerminationStrategy: PID 2659 died... 14:43:18.539591 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2659): Terminated: ok {rc=0} 14:43:18.549788 --- ParallelTerminationStrategy: PID 2662 died... 14:43:18.605737 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2662): Terminated: ok {rc=0} 14:43:18.615804 --- ParallelTerminationStrategy: PID 2665 died... 14:43:18.671639 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2665): Terminated: ok {rc=0} 14:43:18.757942 bus /gobi_0: Setting Powered False 14:43:19.865237 bus /gobi_0: Setting Powered False 14:43:20.972804 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2663): Process ended prematurely: osmo-stp_10.42.42.5(pid=2663) [trial-2406↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2663)]