Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=3689): Process ended prematurely: osmo-stp_10.42.42.5(pid=3689) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3689)]
Standard Output
---------------------------------------------- trial-2406 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 14:53:58.638286 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:53:58.649814 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 14:53:58.812724 tst cs_paging_gprs_active.py: using LAC 41666 14:53:58.938226 tst cs_paging_gprs_active.py: using RAC 101 14:53:59.063517 tst cs_paging_gprs_active.py: using CellId 41666 14:53:59.188318 tst cs_paging_gprs_active.py: using BVCI 41667 14:53:59.213189 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:53:59.224696 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:53:59.236047 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:53:59.247483 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:53:59.259211 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:53:59.270756 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:53:59.282460 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:53:59.293913 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:53:59.305685 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 14:53:59.421365 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 14:53:59.714364 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 14:53:59.849121 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:54:00.183284 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3408): Launched 14:54:00.461434 run iperf3-srv_10.42.42.10(pid=3409): Launched 14:54:00.658931 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 14:54:00.793566 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:54:01.154339 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3410): Launched 14:54:01.452322 run iperf3-srv_10.42.42.10(pid=3411): Launched 14:54:01.654655 tst cs_paging_gprs_active.py:38: start network... 14:54:01.792596 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:54:02.407226 run create_hlr_db(pid=3448): Launched 14:54:02.612158 bus /gobi_6: Setting Powered False 14:54:03.676407 run create_hlr_db(pid=3448): Terminated: ok {rc=0} 14:54:04.157537 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3683): Launched 14:54:04.590077 run osmo-hlr_10.42.42.2(pid=3686): Launched 14:54:04.827221 run osmo-stp_10.42.42.5: Starting osmo-stp 14:54:05.415000 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3688): Launched 14:54:05.834832 run osmo-stp_10.42.42.5(pid=3689): Launched 14:54:06.033978 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:54:06.630940 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3693): Launched 14:54:06.748513 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:54:07.056432 run patchelf(pid=3694): Launched 14:54:07.238376 run osmo-stp_10.42.42.5(pid=3689): ERR: Terminated: ERROR {rc=1} [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3689)] 14:54:07.371209 run osmo-stp_10.42.42.5(pid=3689): stdout: | (launched: 2022-12-14_14:54:05.572506) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:54:07.506341 run osmo-stp_10.42.42.5(pid=3689): stderr: | �[0;m�[38;5;43m20221214145405915 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214145405915 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214145405915 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214145405916 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214145405916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214145405916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214145405916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:54:07.637130 run osmo-stp_10.42.42.5(pid=3689): stdout: | (launched: 2022-12-14_14:54:05.572506) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:54:07.766600 run osmo-stp_10.42.42.5(pid=3689): stderr: | �[0;m�[38;5;43m20221214145405915 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214145405915 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214145405915 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214145405916 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214145405916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214145405916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214145405916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:54:07.916763 run patchelf(pid=3694): Terminating (SIGINT) 14:54:08.090785 run patchelf(pid=3694): Terminated: ok {rc=0} 14:54:08.123699 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3689): Process ended prematurely: osmo-stp_10.42.42.5(pid=3689) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3689)] [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 14:54:08.133896 tst cs_paging_gprs_active.py:38: Test FAILED (9.5 sec) 14:54:08.197572 run osmo-hlr_10.42.42.2(pid=3686): ERR: Terminated: ERROR {rc=237} [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3686)] 14:54:08.250107 run osmo-hlr_10.42.42.2(pid=3686): stdout: | (launched: 2022-12-14_14:54:04.314548) 14:54:08.302301 run osmo-hlr_10.42.42.2(pid=3686): stderr: | �[0;m�[1;31m20221214145404623 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214145404623 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214145404623 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214145404623 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214145404623 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214145404623 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214145404639 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214145404651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214145404652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214145404652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:54:08.347252 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3408): Terminating (SIGTERM) 14:54:08.391734 run iperf3-srv_10.42.42.10(pid=3409): Terminating (SIGTERM) 14:54:08.436792 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3410): Terminating (SIGTERM) 14:54:08.480776 run iperf3-srv_10.42.42.10(pid=3411): Terminating (SIGTERM) 14:54:08.525647 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3683): Terminating (SIGTERM) 14:54:08.570116 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3688): Terminating (SIGTERM) 14:54:08.614443 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3693): Terminating (SIGTERM) 14:54:08.625977 --- ParallelTerminationStrategy: PID 3408 died... 14:54:08.685183 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3408): Terminated: ok {rc=0} 14:54:08.695486 --- ParallelTerminationStrategy: PID 3409 died... 14:54:08.752337 run iperf3-srv_10.42.42.10(pid=3409): Terminated {rc=256} 14:54:08.762690 --- ParallelTerminationStrategy: PID 3410 died... 14:54:08.821462 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3410): Terminated: ok {rc=0} 14:54:08.832725 --- ParallelTerminationStrategy: PID 3411 died... 14:54:08.888246 run iperf3-srv_10.42.42.10(pid=3411): Terminated {rc=256} 14:54:08.898770 --- ParallelTerminationStrategy: PID 3683 died... 14:54:08.955892 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3683): Terminated: ok {rc=0} 14:54:08.966384 --- ParallelTerminationStrategy: PID 3688 died... 14:54:09.024170 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3688): Terminated: ok {rc=0} 14:54:09.034584 --- ParallelTerminationStrategy: PID 3693 died... 14:54:09.091808 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3693): Terminated: ok {rc=0} 14:54:09.179117 bus /gobi_0: Setting Powered False 14:54:10.283720 bus /gobi_0: Setting Powered False 14:54:11.393826 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3689): Process ended prematurely: osmo-stp_10.42.42.5(pid=3689) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3689)]