ms: Quit early when all tests concluded.. (details)
ms: Simplify starting of the test and combine loop and wait (details)
ms: Only use completed tests for min/max handling (details)
ms: Remove unused imports (details)
ms: Make the total test duration configurable (details)
Add ttcn3-bts-test env (details)
bts: Recreate resources.conf trx_list with len based on num_trx (details)
nanobts: Support multiTRX (details)
jenkins-build-osmo-msc.sh: Build osmo-hlr before osmo-msc (details)
bts_nanobts: Fix pwsup_list increasing its size every new test (details)
resources.conf.prod: Update modem paths after HW setup changes (details)
Cleanup of class scoped variables (details)
osmo-hlr.cfg.tmpl: Add ussd routing prefix for *#100# and fix expected (details)
Introduce scenario modifiers (details)
Replace suites dyn_ts_ipa* and voice using scenario modifiers (details)
osmo-bsc,msc: Set mgw local-ip in cfg.tmpl (details)
Add channel_allocator cfg attr to bts resources (details)
Add testsuite + scenarios to test nanoBTS multiTRX (details)
Check for the sispm dependency (details)
suite: Fix generation of config() dictionary (details)
osmo-bsc: Parametrize codec-list VTY cfg (details)
default-suites: Add suites testing different codecs (details)
default-suites: Remove octobts tests (details)
osmo-bts-trx: Big refactor and cleanup of osmo-trx related code (details)
Check for smpplib being installed as well (details)
Generate imsi/ki on OsmoMobile construction (details)
Allow to access imsi/ki from the OsmoMobile instances (details)
Remove tests for unspecified speech HR2 (details)
contrib: Disable installing unneeded systemd service files (details)
Build and use osmo-bsc_mgcp from openbsc.git instead of osmo-mgw.git (details)
Keep track of all mobiles and copy them to unstarted later (details)
Sanitize existing suite names (details)
build: Add overload to clone repo and build in subdirectory (details)
osmo-bts-trx: Add multiTRX support (details)
osmo-trx: Add multi_arfcn support (details)
default-suites: Remove nanobts HR1 voice test (details)
encryption: Reuse code using test lib features (details)
contrib: Add jenkins-build-osmo-iuh.sh (details)
contrib: Build osmo-msc with IU support (details)
contrib: Build osmo-sgsn with IU support (details)
suites: encryption: Add test register_a5_3_authreq (details)
contrib: Use correct var to write repo name in git_hashes.txt (details)
Add dynts suite to test switch between PDCH and TCH (details)
default-suites.conf: Add empty lines to easily spot different sections (details)
Optimize and re-use an existing repository (details)
Package mobile and virtphy as part of osmocom-bb as well (details)
Be able to switch-off ASAN builds of our binaries. (details)
Make code copying inst through ssh generic (details)
osmotrx: Allow running osmo-trx from remote host (details)
osmotrx: Make sure remote process stops after ssh session is closed (details)
bts_osmo: Only check for socket path in ready_for_pcu() (details)
resources.conf.prod: Use specific remote machine to run osmo-trx (details)
osmo-trx: Enable multi_arfcn for B200 and only in multiTRX setup (details)
default-suites.conf: Add test to check multiTRX with Ettus B200 (details)
templates: Update .cfg files to use logging level set-all (details)
Drop unused sysmobts-mgr.cfg.tmpl (details)
defaults.conf: Add SDCCH8 ts in TRX1 cfg (details)
resources.conf.prod: Update TRX host ip addr (details)
bsc: Record RSL traffic in case rsl_ip and oml_ip differs (details)
osmo-bts-trx: Add support for osmo-trx-lms (details)
ttcn3: Support running tests without PCU socket avail (details)
ttcn3: Allow remote hosts (sysmobts) to access RSL srv inside TTCN3 (details)
First round of clean-ups of imports and unused variables (details)
process: Make sure sync process is terminated if ogt is stopped (details)
defaults.conf: Set valid default codec_list matching avail TS types (details)
default-suites: Remove .conf suffic from scenarios (details)
default-suites.conf: Make sure we use fr codec with IPA dyn TS (details)
Always initialize the _started in the test (details)
Create a "ms_driver" stub for the testsuite (details)
contrib: build-osmo-sgsn: Depend on osmo-hlr build (details)
utils: Introduce show_usb_device.py (details)
utils: Introduce modem-netns-setup.py (details)
utils: Add osmo-gsm-tester_setcap_net_*.sh scripts (details)
Add support to test gprs IPv4 data plane (details)
pcap_recorder: Add support to run in netns (details)
resources.conf: Add extra IPaddr to pool (details)
Introduce iperf3 testing infrastructure (details)
Add support to enable EGPRS (details)
default-suites.conf: Enable testing egprs (details)
resources.conf: ec20: Enable voice support (details)
ms_driver: Initialize event_server_sk_tmp_dir in ctor (details)
ms_driver: Use terminate not kill and initialize in ctor (details)
resources.conf.prod: Update modem info after HW upgrade (details)
ms_driver: Fix subject in the header (details)
osmo-trx: Add support for dev-args cfg parameter (details)
resurces.conf.prod: Add UmTRX device (details)
default-suites: Add tests for UmTRX (details)
iperf3: Fix parsing of incorrect json from iperf3 (details)
process: Move standalone run_local_sync as method of Process (details)
process: launch_sync: allow non success return (details)
nanobts: ipacces-config: Use process.launch_sync helper (details)
templates: osmo-pcu: Set log level from dbg to info (details)
templates: osmo-pcu-sysmo: Set log level from dbg to info (details)
misc: Use RPATH to avoid having tests to set LD_LIBRARY_PATH (details)
ms_driver: Allow to specify env and binary name/path (details)
ms_driver: Switch to process.Process from subprocess (details)
default-suites: Enable tests for LimeSDR-USB (details)
resources.conf.rnd: gobi2k changed by ec20 (details)
iperf3: Allow changing port of iperf3 server (details)
iperf3: implement str() method in iperf3 server (details)
tests: iperf3: Support testing parallel iperf3 clients in test (details)
templates: bsc/nitb: Remove explicit no force-combined-si (details)
resources.conf: Set UHD identifiers on B200 devices (details)
suites: gprs: Add test to verify MS can use gprs after long idle time (details)
suites: gprs: Add test to verify CS paging works while MS is GPRS (details)
ms_driver: use the util.Dir and create one dir per instance (details)
ms_driver: Consult the suite to get the binaries (details)
suites: Add an initial test for the ms_driver (details)