(launched: 2020-11-27_00:22:03.582197)
linux; GNU C++ version 6.3.0 20170221; Boost_106200; UHD_003.009.005-0-unknown

% 'rt-prio 18' is deprecated, use 'policy rr 18' under 'sched' node instead
20201127002203983 [1;33mDLGLOBAL[0;m <0008> telnet_interface.c:104 Available via telnet 10.42.42.116 4237
20201127002203984 [1;33mDLCTRL[0;m <000f> control_if.c:911 CTRL at 10.42.42.116 4236
20201127002203984 [1;32mDMAIN[0;m <0000> osmo-trx.cpp:495 SSE3 support compiled in and supported by CPU
20201127002203984 [1;32mDMAIN[0;m <0000> osmo-trx.cpp:507 SSE4.1 support compiled in and supported by CPU
20201127002203984 [1;32mDMAIN[0;m <0000> osmo-trx.cpp:561 [tid=140037658641728] Config Settings
   Log Level............... 0
   Device args............. type=b200,serial=306BD11
   TRX Base Port........... 5700
   TRX Address............. 10.42.42.116
   GSM BTS Address......... 10.42.42.50
   Channels................ 1
   Tx Samples-per-Symbol... 4
   Rx Samples-per-Symbol... 4
   EDGE support............ 0
   Extended RACH support... 0
   Reference............... 1
   Filler Burst Type....... Empty bursts
   Filler Burst TSC........ 0
   Filler Burst RACH Delay. 0
   Multi-Carrier........... 0
   Tuning offset........... 0
   RSSI to dBm offset...... 0 (relative)
   Swap channels........... 0
   Tx Antennas............. '<default>'
   Rx Antennas............. '<default>'

20201127002203984 [1;32mDMAIN[0;m <0000> osmo-trx.cpp:481 [tid=140037658641728] Setting SCHED_RR priority 18. This setting is DEPRECATED, please use 'policy rr 18' under the 'sched' VTY node instead.
20201127002204002 [1;32mDDEV[0;m <0005> UHDDevice.cpp:571 [tid=140037658641728] Using discovered UHD device type=b200,name=,serial=306BD11,product=B200
20201127002204033 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] Detected Device: B200
20201127002204109 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] Operating over USB 3.
20201127002204131 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] Initialize CODEC control...
20201127002204397 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] Initialize Radio control...
20201127002204427 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] Performing register loopback test... 
20201127002204436 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] pass
20201127002204437 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] Performing CODEC loopback test... 
20201127002204444 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] pass
20201127002204444 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] Asking for clock rate 16.000000 MHz... 
20201127002204766 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] 
Actually got clock rate 16.000000 MHz.
20201127002204766 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] Performing timer loopback test... 
20201127002204867 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] pass
20201127002204917 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] Setting master clock rate selection to 'automatic'.
20201127002204917 [1;32mDMAIN[0;m <0000> UHDDevice.cpp:222 [tid=140037658641728] Antennas configured successfully
20201127002204924 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] Asking for clock rate 26.000000 MHz... 
20201127002205184 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] 
Actually got clock rate 26.000000 MHz.
20201127002205184 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] Performing timer loopback test... 
20201127002205285 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140037658641728] pass
20201127002205285 [1;32mDDEV[0;m <0005> UHDDevice.cpp:345 [tid=140037658641728] Rates configured for B200 4 SPS
20201127002205330 [1;32mDDEV[0;m <0005> UHDDevice.cpp:305 [tid=140037658641728] Supported Tx gain range [0; 89.75]
20201127002205330 [1;32mDDEV[0;m <0005> UHDDevice.cpp:310 [tid=140037658641728] Supported Rx gain range [0; 76]
20201127002205330 [1;32mDDEV[0;m <0005> UHDDevice.cpp:314 [tid=140037658641728] Default setting Tx gain for channel 0 to 44.875
20201127002205331 [1;32mDDEV[0;m <0005> UHDDevice.cpp:321 [tid=140037658641728] Default setting Rx gain for channel 0 to 38
20201127002205331 [1;32mDDEV[0;m <0005> UHDDevice.cpp:670 [tid=140037658641728] Device configuration: Single USRP:
  Device: B-Series Device
  Mboard 0: B200
  RX Channel: 0
    RX DSP: 0
    RX Dboard: A
    RX Subdev: FE-RX2
  TX Channel: 0
    TX DSP: 0
    TX Dboard: A
    TX Subdev: FE-TX2
20201127002205340 [1;33mDMAIN[0;m <0000> osmo-trx.cpp:609 [tid=140037658641728] -- Transceiver active with 1 channel(s)
[1;33m20201127002207490 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'POWEROFF'
[0;m[1;33m20201127002207490 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP POWEROFF 0'
[0;m[1;33m20201127002207490 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'RFMUTE 1'
[0;m[1;33m20201127002207490 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP RFMUTE 0 1'
[0;m[1;33m20201127002207515 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'SETFORMAT 1'
[0;m[1;33m20201127002207515 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1004 [tid=140037658641728][chan=0] BTS requests TRXD version switch: 1
[0;m[1;33m20201127002207515 [1;33mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1010 [tid=140037658641728][chan=0] switching to TRXD version 1
[0;m[1;33m20201127002207515 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP SETFORMAT 1 1'
[0;m[1;33m20201127002207554 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'RXTUNE 1781400'
[0;m20201127002207726 [1;32mDDEV[0;m <0005> UHDDevice.cpp:1032 [tid=140037658641728][chan=0] set_freq(1.7814e+09, Rx): Tune Result:
    Target RF  Freq: 1781.400000 (MHz)
    Actual RF  Freq: 1781.399999 (MHz)
    Target DSP Freq: -0.000001 (MHz)
    Actual DSP Freq: -0.000001 (MHz)

[1;33m20201127002207726 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP RXTUNE 0 1781400'
[0;m[1;33m20201127002207727 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'TXTUNE 1876400'
[0;m20201127002207752 [1;32mDDEV[0;m <0005> UHDDevice.cpp:1032 [tid=140037658641728][chan=0] set_freq(1.8764e+09, Tx): Tune Result:
    Target RF  Freq: 1876.400000 (MHz)
    Actual RF  Freq: 1876.399999 (MHz)
    Target DSP Freq: 0.000001 (MHz)
    Actual DSP Freq: 0.000001 (MHz)

[1;33m20201127002207752 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP TXTUNE 0 1876400'
[0;m[1;33m20201127002207753 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'RFMUTE 0'
[0;m[1;33m20201127002207753 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP RFMUTE 0 0'
[0;m[1;33m20201127002207753 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'SETTSC 7'
[0;m[1;33m20201127002207753 [1;33mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:983 [tid=140037658641728] Changing TSC from 0 to 7
[0;m[1;33m20201127002207753 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP SETTSC 0 7'
[0;m[1;33m20201127002207754 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'RFMUTE 1'
[0;m[1;33m20201127002207754 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP RFMUTE 0 1'
[0;m[1;33m20201127002207754 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'NOMTXPOWER'
[0;m[1;33m20201127002207754 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP NOMTXPOWER 0 7'
[0;m[1;33m20201127002207755 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'POWERON'
[0;m20201127002207755 [1;33mDMAIN[0;m <0000> Transceiver.cpp:290 [tid=140037658641728] Starting the transceiver
20201127002207755 [1;32mDMAIN[0;m <0000> radioInterface.cpp:195 [tid=140037658641728] Starting radio device
20201127002207755 [1;32mDDEV[0;m <0005> UHDDevice.cpp:741 [tid=140037658641728] Starting USRP...
20201127002207755 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140037494241024] Thread 140037494241024 (task 39262) set name: UHDAsyncEvent
20201127002207876 [1;32mDDEV[0;m <0005> UHDDevice.cpp:716 [tid=140037658641728] Initial timestamp 3999698
20201127002207876 [1;32mDDEV[0;m <0005> UHDDevice.cpp:758 [tid=140037658641728] The current time is 3.69428 seconds
20201127002207876 [1;32mDMAIN[0;m <0000> radioInterface.cpp:216 [tid=140037658641728] Radio started
20201127002207876 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140037485848320] Thread 140037485848320 (task 39263) set name: TxLower
20201127002207876 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140037274466048] Thread 140037274466048 (task 39264) set name: RxLower
[1;33m20201127002207876 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP POWERON 0'
[0;m20201127002207876 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140037266073344] Thread 140037266073344 (task 39265) set name: RxUpper0
20201127002207876 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140037257680640] Thread 140037257680640 (task 39266) set name: TxUpper0
20201127002207878 [1;33mDTRXCLK[0;m <0001> Transceiver.cpp:1149 [tid=140037274466048] Sending CLOCK indications
20201127002207878 [1;32mDTRXCLK[0;m <0001> Transceiver.cpp:1268 [tid=140037274466048] sending IND CLOCK 218259
[1;33m20201127002207879 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'SETPOWER 0'
[0;m20201127002207879 [1;32mDDEV[0;m <0005> UHDDevice.cpp:420 [tid=140037658641728] Set TX gain to 89.75dB, ~7.5 dBm (asked for 89.75 dB, ~7.5 dBm)
[1;33m20201127002207879 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP SETPOWER 0 0'
[0;m[1;33m20201127002207883 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'SETRXGAIN 50'
[0;m20201127002207884 [1;32mDDEV[0;m <0005> UHDDevice.cpp:358 [tid=140037658641728] Set RX gain to 50dB (asked for 50dB)
[1;33m20201127002207884 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP SETRXGAIN 0 50'
[0;m[1;33m20201127002207884 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'SETSLOT 0 5'
[0;m[1;33m20201127002207884 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP SETSLOT 0 0 5'
[0;m[1;33m20201127002207884 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'SETSLOT 1 1'
[0;m[1;33m20201127002207884 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP SETSLOT 0 1 1'
[0;m[1;33m20201127002207885 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'SETSLOT 2 1'
[0;m[1;33m20201127002207885 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP SETSLOT 0 2 1'
[0;m[1;33m20201127002207885 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'SETSLOT 3 1'
[0;m[1;33m20201127002207885 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP SETSLOT 0 3 1'
[0;m[1;33m20201127002207885 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'SETSLOT 4 8'
[0;m[1;33m20201127002207886 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP SETSLOT 0 4 8'
[0;m[1;33m20201127002207886 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'SETSLOT 5 3'
[0;m[1;33m20201127002207886 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP SETSLOT 0 5 3'
[0;m[1;33m20201127002207886 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'SETSLOT 6 7'
[0;m[1;33m20201127002207886 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP SETSLOT 0 6 7'
[0;m[1;33m20201127002207887 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'SETSLOT 7 13'
[0;m[1;33m20201127002207887 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP SETSLOT 0 7 13'
[0;m20201127002208880 [1;32mDTRXCLK[0;m <0001> Transceiver.cpp:1268 [tid=140037274466048] sending IND CLOCK 218475
20201127002209880 [1;32mDTRXCLK[0;m <0001> Transceiver.cpp:1268 [tid=140037274466048] sending IND CLOCK 218692
20201127002210697 [1;33mDTRXDDL[0;m <0003> Transceiver.cpp:1049 [tid=140037257680640][chan=0] mDataSockets read(18) failed: -1
20201127002210697 [1;31mDTRXDDL[0;m <0003> Transceiver.cpp:1345 [tid=140037257680640][chan=0] Something went wrong in thread TxUpper0, requesting stop
20201127002210700 [1;33mDMAIN[0;m <0000> proto_trxd.c:113 [tid=39250][chan=0] mDataSockets write(18) failed: -1
20201127002210700 [1;31mDTRXDUL[0;m <0004> Transceiver.cpp:1294 [tid=140037266073344][chan=0] Something went wrong in thread RxUpper0, requesting stop
20201127002210881 [1;32mDTRXCLK[0;m <0001> Transceiver.cpp:1268 [tid=140037274466048] sending IND CLOCK 218909
[1;33m20201127002211309 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140037658641728][chan=0] command is 'POWEROFF'
[0;m20201127002211309 [1;33mDMAIN[0;m <0000> Transceiver.cpp:348 [tid=140037658641728] Stopping the transceiver
20201127002211312 [1;32mDMAIN[0;m <0000> Transceiver.cpp:361 [tid=140037658641728] Stopping the device
20201127002211319 [1;33mDMAIN[0;m <0000> Transceiver.cpp:374 [tid=140037658641728] Transceiver stopped
[1;33m20201127002211319 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140037658641728][chan=0] response is 'RSP POWEROFF 0'
[0;m20201127002211319 [1;33mDMAIN[0;m <0000> osmo-trx.cpp:566 [tid=140037658641728] Shutting down transceiver...
