#! /bin/bash # Generated by configure. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=${CONFIG_SHELL-/bin/bash} export SHELL ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl as_echo='printf %s\n' as_echo_n='printf %s' # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by libosmocore $as_me 1.10.0.56-fc03, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " # Files that config.status was made for. config_files=" libosmocore.pc libosmocodec.pc libosmocoding.pc libosmovty.pc libosmogsm.pc libosmoisdn.pc libosmogb.pc libosmoctrl.pc libosmosim.pc libosmousb.pc include/Makefile include/osmocom/Makefile include/osmocom/codec/Makefile include/osmocom/coding/Makefile include/osmocom/core/Makefile include/osmocom/crypt/Makefile include/osmocom/ctrl/Makefile include/osmocom/gprs/Makefile include/osmocom/gprs/protocol/Makefile include/osmocom/gsm/Makefile include/osmocom/gsm/protocol/Makefile include/osmocom/isdn/Makefile include/osmocom/sim/Makefile include/osmocom/usb/Makefile include/osmocom/vty/Makefile src/Makefile src/core/Makefile src/vty/Makefile src/codec/Makefile src/coding/Makefile src/sim/Makefile src/usb/Makefile src/gsm/Makefile src/isdn/Makefile src/gb/Makefile src/ctrl/Makefile src/pseudotalloc/Makefile tapset/Makefile tests/Makefile tests/atlocal utils/Makefile utils/osmo-stat-dummy/Makefile Doxyfile.core Doxyfile.gsm Doxyfile.isdn Doxyfile.vty Doxyfile.codec Doxyfile.coding Doxyfile.gb Doxyfile.ctrl Doxyfile.sim Doxyfile.usb Makefile contrib/libosmocore.spec" config_headers=" config.h" config_commands=" tests/atconfig depfiles libtool" ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." ac_cs_config="'--prefix=/usr/local/jenkins-build/inst-osmo-pcu-oc2g' '--with-systemdsystemunitdir=no' '--target=arm-poky-linux-gnueabi' '--host=arm-poky-linux-gnueabi' '--build=x86_64-linux' '--with-libtool-sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi' '--disable-pcsc' '--disable-libmnl' '--disable-doxygen' '--disable-gnutls' '--disable-detect-tls-gcc-arm-bug' '--disable-uring' 'build_alias=x86_64-linux' 'host_alias=arm-poky-linux-gnueabi' 'target_alias=arm-poky-linux-gnueabi' 'CC=arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi' 'CFLAGS= -O2 -pipe' 'LDFLAGS=-Wl,-O1' 'CPPFLAGS=' 'CPP=arm-poky-linux-gnueabi-gcc -E -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi' 'PKG_CONFIG_PATH=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-pcu-oc2g/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/share/pkgconfig'" ac_cs_version="\ libosmocore config.status 1.10.0.56-fc03 configured by ./configure, generated by GNU Autoconf 2.69, with options \"$ac_cs_config\" Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='/build/libosmocore' srcdir='.' INSTALL='/usr/bin/install -c' MKDIR_P='/usr/bin/mkdir -p' AWK='gawk' test -n "$AWK" || AWK=awk # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi if $ac_cs_recheck; then set X /bin/bash './configure' '--prefix=/usr/local/jenkins-build/inst-osmo-pcu-oc2g' '--with-systemdsystemunitdir=no' '--target=arm-poky-linux-gnueabi' '--host=arm-poky-linux-gnueabi' '--build=x86_64-linux' '--with-libtool-sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi' '--disable-pcsc' '--disable-libmnl' '--disable-doxygen' '--disable-gnutls' '--disable-detect-tls-gcc-arm-bug' '--disable-uring' 'build_alias=x86_64-linux' 'host_alias=arm-poky-linux-gnueabi' 'target_alias=arm-poky-linux-gnueabi' 'CC=arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi' 'CFLAGS= -O2 -pipe' 'LDFLAGS=-Wl,-O1' 'CPPFLAGS=' 'CPP=arm-poky-linux-gnueabi-gcc -E -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi' 'PKG_CONFIG_PATH=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-pcu-oc2g/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/share/pkgconfig' $ac_configure_extra_args --no-create --no-recursion shift $as_echo "running CONFIG_SHELL=/bin/bash $*" >&6 CONFIG_SHELL='/bin/bash' export CONFIG_SHELL exec "$@" fi exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 # # INIT-COMMANDS # AMDEP_TRUE="" ac_aux_dir="." # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='s/\(["`$\\]\)/\\\1/g' double_quote_subst='s/\(["`\\]\)/\\\1/g' delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' macro_version='2.4.6' macro_revision='2.4.6' pic_mode='yes' enable_static='no' enable_shared='yes' enable_fast_install='yes' shared_archive_member_spec='' SHELL='/bin/bash' ECHO='printf %s\n' PATH_SEPARATOR=':' host_alias='arm-poky-linux-gnueabi' host='arm-poky-linux-gnueabi' host_os='linux-gnueabi' build_alias='x86_64-linux' build='x86_64-pc-linux-gnu' build_os='linux-gnu' SED='sed' Xsed='sed -e 1s/^X//' GREP='/usr/bin/grep' EGREP='/usr/bin/grep -E' FGREP='/usr/bin/grep -F' LD='arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi' NM='arm-poky-linux-gnueabi-nm' LN_S='ln -s' max_cmd_len='1572864' ac_objext='o' exeext='' lt_unset='unset' lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' lt_cv_to_host_file_cmd='func_convert_file_noop' lt_cv_to_tool_file_cmd='func_convert_file_noop' reload_flag=' -r' reload_cmds='$LD$reload_flag -o $output$reload_objs' OBJDUMP='arm-poky-linux-gnueabi-objdump' deplibs_check_method='pass_all' file_magic_cmd='$MAGIC_CMD' file_magic_glob='' want_nocaseglob='no' DLLTOOL='false' sharedlib_from_linklib_cmd='printf %s\n' AR='arm-poky-linux-gnueabi-ar' AR_FLAGS='cru' archiver_list_spec='@' STRIP='arm-poky-linux-gnueabi-strip' RANLIB='arm-poky-linux-gnueabi-ranlib' old_postinstall_cmds='chmod 644 $oldlib~$RANLIB $tool_oldlib' old_postuninstall_cmds='' old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $tool_oldlib' lock_old_archive_extraction='no' CC='arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi' CFLAGS=' -O2 -pipe -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall' compiler='arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi' GCC='yes' lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\''' lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\''' lt_cv_sys_global_symbol_to_import='' lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"\1", (void *) \&\1},/p'\''' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(lib.*\)$/ {"\1", (void *) \&\1},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"lib\1", (void *) \&\1},/p'\''' lt_cv_nm_interface='BSD nm' nm_file_list_spec='@' lt_sysroot='/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi' lt_cv_truncate_bin='/usr/bin/dd bs=4096 count=1' objdir='.libs' MAGIC_CMD='file' lt_prog_compiler_no_builtin_flag=' -fno-builtin' lt_prog_compiler_pic=' -fPIC -DPIC' lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='' lt_cv_prog_compiler_c_o='yes' need_locks='no' MANIFEST_TOOL=':' DSYMUTIL='' NMEDIT='' LIPO='' OTOOL='' OTOOL64='' libext='a' shrext_cmds='.so' extract_expsyms_cmds='' archive_cmds_need_lc='no' enable_shared_with_static_runtimes='no' export_dynamic_flag_spec='$wl--export-dynamic' whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' compiler_needs_object='no' old_archive_from_new_cmds='' old_archive_from_expsyms_cmds='' archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' module_cmds='' module_expsym_cmds='' with_gnu_ld='yes' allow_undefined_flag='' no_undefined_flag='' hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator='' hardcode_direct='no' hardcode_direct_absolute='no' hardcode_minus_L='no' hardcode_shlibpath_var='unsupported' hardcode_automatic='no' inherit_rpath='no' link_all_deplibs='unknown' always_export_symbols='no' export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' include_expsyms='' prelink_cmds='' postlink_cmds='' file_list_spec='' variables_saved_for_relink='PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH' need_lib_prefix='no' need_version='no' version_type='linux' runpath_var='LD_RUN_PATH' shlibpath_var='LD_LIBRARY_PATH' shlibpath_overrides_runpath='no' libname_spec='lib$name' library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' install_override_mode='' postinstall_cmds='' postuninstall_cmds='' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' finish_eval='' hardcode_into_libs='yes' sys_lib_search_path_spec='/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/lib/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/6.4.0 /opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/lib /opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/lib/arm-poky-linux-gnueabi/6.4.0 /opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/lib ' configure_time_dlsearch_path='/lib /usr/lib /usr/lib/x86_64-linux-gnu/libfakeroot /usr/local/lib /usr/local/lib/x86_64-linux-gnu /lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu ' configure_time_lt_sys_library_path='' hardcode_action='immediate' enable_dlopen='unknown' enable_dlopen_self='unknown' enable_dlopen_self_static='unknown' old_striplib='arm-poky-linux-gnueabi-strip --strip-debug' striplib='arm-poky-linux-gnueabi-strip --strip-unneeded' LTCC='arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi' LTCFLAGS=' -O2 -pipe -std=gnu11' compiler='arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } # Quote evaled strings. for var in SHELL ECHO PATH_SEPARATOR SED GREP EGREP FGREP LD NM LN_S lt_SP2NL lt_NL2SP reload_flag OBJDUMP deplibs_check_method file_magic_cmd file_magic_glob want_nocaseglob DLLTOOL sharedlib_from_linklib_cmd AR AR_FLAGS archiver_list_spec STRIP RANLIB CC CFLAGS compiler lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl lt_cv_sys_global_symbol_to_import lt_cv_sys_global_symbol_to_c_name_address lt_cv_sys_global_symbol_to_c_name_address_lib_prefix lt_cv_nm_interface nm_file_list_spec lt_cv_truncate_bin lt_prog_compiler_no_builtin_flag lt_prog_compiler_pic lt_prog_compiler_wl lt_prog_compiler_static lt_cv_prog_compiler_c_o need_locks MANIFEST_TOOL DSYMUTIL NMEDIT LIPO OTOOL OTOOL64 shrext_cmds export_dynamic_flag_spec whole_archive_flag_spec compiler_needs_object with_gnu_ld allow_undefined_flag no_undefined_flag hardcode_libdir_flag_spec hardcode_libdir_separator exclude_expsyms include_expsyms file_list_spec variables_saved_for_relink libname_spec library_names_spec soname_spec install_override_mode finish_eval old_striplib striplib; do case `eval \\$ECHO \\""\\$$var"\\"` in *[\\\`\"\$]*) eval "lt_$var=\\\"\`\$ECHO \"\$$var\" | \$SED \"\$sed_quote_subst\"\`\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_$var=\\\"\$$var\\\"" ;; esac done # Double-quote double-evaled strings. for var in reload_cmds old_postinstall_cmds old_postuninstall_cmds old_archive_cmds extract_expsyms_cmds old_archive_from_new_cmds old_archive_from_expsyms_cmds archive_cmds archive_expsym_cmds module_cmds module_expsym_cmds export_symbols_cmds prelink_cmds postlink_cmds postinstall_cmds postuninstall_cmds finish_cmds sys_lib_search_path_spec configure_time_dlsearch_path configure_time_lt_sys_library_path; do case `eval \\$ECHO \\""\\$$var"\\"` in *[\\\`\"\$]*) eval "lt_$var=\\\"\`\$ECHO \"\$$var\" | \$SED -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_$var=\\\"\$$var\\\"" ;; esac done ac_aux_dir='.' # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes INIT. if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi PACKAGE='libosmocore' VERSION='1.10.0.56-fc03' RM='rm -f' ofile='arm-poky-linux-gnueabi-libtool' # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "tests/atconfig") CONFIG_COMMANDS="$CONFIG_COMMANDS tests/atconfig" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "libosmocore.pc") CONFIG_FILES="$CONFIG_FILES libosmocore.pc" ;; "libosmocodec.pc") CONFIG_FILES="$CONFIG_FILES libosmocodec.pc" ;; "libosmocoding.pc") CONFIG_FILES="$CONFIG_FILES libosmocoding.pc" ;; "libosmovty.pc") CONFIG_FILES="$CONFIG_FILES libosmovty.pc" ;; "libosmogsm.pc") CONFIG_FILES="$CONFIG_FILES libosmogsm.pc" ;; "libosmoisdn.pc") CONFIG_FILES="$CONFIG_FILES libosmoisdn.pc" ;; "libosmogb.pc") CONFIG_FILES="$CONFIG_FILES libosmogb.pc" ;; "libosmoctrl.pc") CONFIG_FILES="$CONFIG_FILES libosmoctrl.pc" ;; "libosmosim.pc") CONFIG_FILES="$CONFIG_FILES libosmosim.pc" ;; "libosmousb.pc") CONFIG_FILES="$CONFIG_FILES libosmousb.pc" ;; "include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;; "include/osmocom/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/Makefile" ;; "include/osmocom/codec/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/codec/Makefile" ;; "include/osmocom/coding/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/coding/Makefile" ;; "include/osmocom/core/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/core/Makefile" ;; "include/osmocom/crypt/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/crypt/Makefile" ;; "include/osmocom/ctrl/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/ctrl/Makefile" ;; "include/osmocom/gprs/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/gprs/Makefile" ;; "include/osmocom/gprs/protocol/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/gprs/protocol/Makefile" ;; "include/osmocom/gsm/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/gsm/Makefile" ;; "include/osmocom/gsm/protocol/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/gsm/protocol/Makefile" ;; "include/osmocom/isdn/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/isdn/Makefile" ;; "include/osmocom/sim/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/sim/Makefile" ;; "include/osmocom/usb/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/usb/Makefile" ;; "include/osmocom/vty/Makefile") CONFIG_FILES="$CONFIG_FILES include/osmocom/vty/Makefile" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "src/core/Makefile") CONFIG_FILES="$CONFIG_FILES src/core/Makefile" ;; "src/vty/Makefile") CONFIG_FILES="$CONFIG_FILES src/vty/Makefile" ;; "src/codec/Makefile") CONFIG_FILES="$CONFIG_FILES src/codec/Makefile" ;; "src/coding/Makefile") CONFIG_FILES="$CONFIG_FILES src/coding/Makefile" ;; "src/sim/Makefile") CONFIG_FILES="$CONFIG_FILES src/sim/Makefile" ;; "src/usb/Makefile") CONFIG_FILES="$CONFIG_FILES src/usb/Makefile" ;; "src/gsm/Makefile") CONFIG_FILES="$CONFIG_FILES src/gsm/Makefile" ;; "src/isdn/Makefile") CONFIG_FILES="$CONFIG_FILES src/isdn/Makefile" ;; "src/gb/Makefile") CONFIG_FILES="$CONFIG_FILES src/gb/Makefile" ;; "src/ctrl/Makefile") CONFIG_FILES="$CONFIG_FILES src/ctrl/Makefile" ;; "src/pseudotalloc/Makefile") CONFIG_FILES="$CONFIG_FILES src/pseudotalloc/Makefile" ;; "tapset/Makefile") CONFIG_FILES="$CONFIG_FILES tapset/Makefile" ;; "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; "tests/atlocal") CONFIG_FILES="$CONFIG_FILES tests/atlocal" ;; "utils/Makefile") CONFIG_FILES="$CONFIG_FILES utils/Makefile" ;; "utils/osmo-stat-dummy/Makefile") CONFIG_FILES="$CONFIG_FILES utils/osmo-stat-dummy/Makefile" ;; "Doxyfile.core") CONFIG_FILES="$CONFIG_FILES Doxyfile.core" ;; "Doxyfile.gsm") CONFIG_FILES="$CONFIG_FILES Doxyfile.gsm" ;; "Doxyfile.isdn") CONFIG_FILES="$CONFIG_FILES Doxyfile.isdn" ;; "Doxyfile.vty") CONFIG_FILES="$CONFIG_FILES Doxyfile.vty" ;; "Doxyfile.codec") CONFIG_FILES="$CONFIG_FILES Doxyfile.codec" ;; "Doxyfile.coding") CONFIG_FILES="$CONFIG_FILES Doxyfile.coding" ;; "Doxyfile.gb") CONFIG_FILES="$CONFIG_FILES Doxyfile.gb" ;; "Doxyfile.ctrl") CONFIG_FILES="$CONFIG_FILES Doxyfile.ctrl" ;; "Doxyfile.sim") CONFIG_FILES="$CONFIG_FILES Doxyfile.sim" ;; "Doxyfile.usb") CONFIG_FILES="$CONFIG_FILES Doxyfile.usb" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "contrib/libosmocore.spec") CONFIG_FILES="$CONFIG_FILES contrib/libosmocore.spec" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && cat >>"$ac_tmp/subs1.awk" <<\_ACAWK && S["am__EXEEXT_FALSE"]="" S["am__EXEEXT_TRUE"]="#" S["LTLIBOBJS"]="" S["LIBOBJS"]="" S["LCOV_COBERTURA"]="" S["CODE_COVERAGE_IGNORE_PATTERN"]="" S["CODE_COVERAGE_LCOV_OPTIONS"]="" S["CODE_COVERAGE_BRANCH_COVERAGE"]="" S["CODE_COVERAGE_DIRECTORY"]="" S["CODE_COVERAGE_RULES"]="\n"\ "# Code coverage\n"\ "#\n"\ "# Optional:\n"\ "# - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.\n"\ "# Multiple directories may be specified, separated by whitespace.\n"\ "# (Default: $(top_builddir))\n"\ "# - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated\n"\ "# by lcov for code coverage. (Default:\n"\ "# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info)\n"\ "# - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage\n"\ "# reports to be created. (Default:\n"\ "# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage)\n"\ "# - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage,\n"\ "# set to 0 to disable it and leave empty to stay with the default.\n"\ "# (Default: empty)\n"\ "# - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov\n"\ "# instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)\n"\ "# - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov\n"\ "# instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)\n"\ "# - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov\n"\ "# - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the\n"\ "# collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)\n"\ "# - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov\n"\ "# instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)\n"\ "# - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering\n"\ "# lcov instance. (Default: empty)\n"\ "# - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov\n"\ "# instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)\n"\ "# - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the\n"\ "# genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)\n"\ "# - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml\n"\ "# instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)\n"\ "# - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore\n"\ "#\n"\ "# The generated report will be titled using the $(PACKAGE_NAME) and\n"\ "# $(PACKAGE_VERSION). In order to add the current git hash to the title,\n"\ "# use the git-version-gen script, available online.\n"\ "\n"\ "# Optional variables\n"\ "CODE_COVERAGE_DIRECTORY ?= $(top_builddir)\n"\ "CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info\n"\ "CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage\n"\ "CODE_COVERAGE_BRANCH_COVERAGE ?=\n"\ "CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\\\n"\ "--rc lcov_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE))\n"\ "CODE_COVERAGE_LCOV_SHOPTS ?= $(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)\n"\ "CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool \"$(GCOV)\"\n"\ "CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)\n"\ "CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)\n"\ "CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?=\n"\ "CODE_COVERAGE_LCOV_RMOPTS ?= $(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)\n"\ "CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\\\n"\ "$(if $(CODE_COVERAGE_BRANCH_COVERAGE),\\\n"\ "--rc genhtml_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE))\n"\ "CODE_COVERAGE_GENHTML_OPTIONS ?= $(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)\n"\ "CODE_COVERAGE_IGNORE_PATTERN ?=\n"\ "\n"\ "GITIGNOREFILES ?=\n"\ "GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY)\n"\ "\n"\ "code_coverage_v_lcov_cap = $(code_coverage_v_lcov_cap_$(V))\n"\ "code_coverage_v_lcov_cap_ = $(code_coverage_v_lcov_cap_$(AM_DEFAULT_VERBOSITY))\n"\ "code_coverage_v_lcov_cap_0 = @echo \" LCOV --capture\"\\\n"\ " $(CODE_COVERAGE_OUTPUT_FILE);\n"\ "code_coverage_v_lcov_ign = $(code_coverage_v_lcov_ign_$(V))\n"\ "code_coverage_v_lcov_ign_ = $(code_coverage_v_lcov_ign_$(AM_DEFAULT_VERBOSITY))\n"\ "code_coverage_v_lcov_ign_0 = @echo \" LCOV --remove /tmp/*\"\\\n"\ " $(CODE_COVERAGE_IGNORE_PATTERN);\n"\ "code_coverage_v_genhtml = $(code_coverage_v_genhtml_$(V))\n"\ "code_coverage_v_genhtml_ = $(code_coverage_v_genhtml_$(AM_DEFAULT_VERBOSITY))\n"\ "code_coverage_v_genhtml_0 = @echo \" GEN \" $(CODE_COVERAGE_OUTPUT_DIRECTORY);\n"\ "code_coverage_quiet = $(code_coverage_quiet_$(V))\n"\ "code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY))\n"\ "code_coverage_quiet_0 = --quiet\n"\ "\n"\ "# sanitizes the test-name: replaces with underscores: dashes and dots\n"\ "code_coverage_sanitize = $(subst -,_,$(subst .,_,$(1)))\n"\ "\n"\ "# Use recursive makes in order to ignore errors during check\n"\ "check-code-coverage:\n"\ " @echo \"Need to reconfigure with --enable-code-coverage\"\n"\ "\n"\ "\n"\ "# Capture code coverage data\n"\ "code-coverage-capture: code-coverage-capture-hook\n"\ " @echo \"Need to reconfigure with --enable-code-coverage\"\n"\ "\n"\ "\n"\ "# Hook rule executed before code-coverage-capture, overridable by the user\n"\ "code-coverage-capture-hook:\n"\ "\n"\ "\n"\ "\n"\ "AM_DISTCHECK_CONFIGURE_FLAGS ?=\n"\ "AM_DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage\n"\ "\n"\ ".PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean\n"\ "\n"\ ".PHONY: code-coverage-cobertura\n"\ "code-coverage-cobertura:\n"\ " @echo \"Need to and reconfigure with --enable-code-coverage\"\n"\ "" S["CODE_COVERAGE_LDFLAGS"]="" S["CODE_COVERAGE_LIBS"]="" S["CODE_COVERAGE_CXXFLAGS"]="" S["CODE_COVERAGE_CFLAGS"]="" S["CODE_COVERAGE_CPPFLAGS"]="" S["GENHTML"]="" S["LCOV"]="" S["GCOV"]="" S["CODE_COVERAGE_ENABLED"]="no" S["CODE_COVERAGE_ENABLED_FALSE"]="" S["CODE_COVERAGE_ENABLED_TRUE"]="#" S["ABS_TAPSET_DIR"]="" S["DTRACE"]="" S["ENABLE_SYSTEMTAP_FALSE"]="" S["ENABLE_SYSTEMTAP_TRUE"]="#" S["HAVE_NEON_FALSE"]="" S["HAVE_NEON_TRUE"]="#" S["SIMD_FLAGS"]="" S["HAVE_SSE4_1_FALSE"]="" S["HAVE_SSE4_1_TRUE"]="#" S["HAVE_SSSE3_FALSE"]="" S["HAVE_SSSE3_TRUE"]="#" S["HAVE_AVX2_FALSE"]="" S["HAVE_AVX2_TRUE"]="#" S["ENABLE_EXT_TESTS_FALSE"]="" S["ENABLE_EXT_TESTS_TRUE"]="#" S["OSMOTESTEXT_CHECK"]="" S["pkgpyexecdir"]="" S["pyexecdir"]="" S["pkgpythondir"]="" S["pythondir"]="" S["PYTHON_PLATFORM"]="" S["PYTHON_EXEC_PREFIX"]="" S["PYTHON_LIB_PREFIX"]="" S["PYTHON_PREFIX"]="" S["PYTHON_VERSION"]="" S["PYTHON"]="" S["ENABLE_SERCOM_STUB_FALSE"]="" S["ENABLE_SERCOM_STUB_TRUE"]="#" S["EMBEDDED_FALSE"]="" S["EMBEDDED_TRUE"]="#" S["ENABLE_PSEUDOTALLOC_FALSE"]="" S["ENABLE_PSEUDOTALLOC_TRUE"]="#" S["ENABLE_CTRL_FALSE"]="#" S["ENABLE_CTRL_TRUE"]="" S["ENABLE_GB_FALSE"]="#" S["ENABLE_GB_TRUE"]="" S["ENABLE_UTILITIES_FALSE"]="#" S["ENABLE_UTILITIES_TRUE"]="" S["ENABLE_SERIAL_FALSE"]="#" S["ENABLE_SERIAL_TRUE"]="" S["ENABLE_MSGFILE_FALSE"]="#" S["ENABLE_MSGFILE_TRUE"]="" S["ENABLE_VTY_FALSE"]="#" S["ENABLE_VTY_TRUE"]="" S["ENABLE_PLUGIN_FALSE"]="#" S["ENABLE_PLUGIN_TRUE"]="" S["ENABLE_URING_TESTS"]="yes" S["ENABLE_URING_TESTS_FALSE"]="#" S["ENABLE_URING_TESTS_TRUE"]="" S["ENABLE_SCTP_TESTS_FALSE"]="#" S["ENABLE_SCTP_TESTS_TRUE"]="" S["LIBSCTP_PC"]="" S["HAVE_LIBSCTP"]="1" S["LIBSCTP_LIBS"]="-lsctp" S["LIBSCTP_CFLAGS"]="" S["ENABLE_LIBSCTP_FALSE"]="#" S["ENABLE_LIBSCTP_TRUE"]="" S["ENABLE_LIBMNL"]="" S["ENABLE_LIBMNL_FALSE"]="" S["ENABLE_LIBMNL_TRUE"]="#" S["LIBMNL_PC"]="" S["LIBMNL_LIBS"]="" S["LIBMNL_CFLAGS"]="" S["ENABLE_SYSTEMD_LOGGING"]="" S["ENABLE_SYSTEMD_LOGGING_FALSE"]="" S["ENABLE_SYSTEMD_LOGGING_TRUE"]="#" S["SYSTEMD_LIBS"]="" S["SYSTEMD_CFLAGS"]="" S["ENABLE_GNUTLS"]="no" S["LIBGNUTLS_LIBS"]="" S["LIBGNUTLS_CFLAGS"]="" S["ENABLE_GNUTLS_FALSE"]="" S["ENABLE_GNUTLS_TRUE"]="#" S["ENABLE_LIBUSB"]="yes" S["ENABLE_LIBUSB_FALSE"]="#" S["ENABLE_LIBUSB_TRUE"]="" S["LIBUSB_LIBS"]="-lusb-1.0" S["LIBUSB_CFLAGS"]="-I/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/include/libusb-1.0" S["ENABLE_PCSC"]="no" S["ENABLE_PCSC_FALSE"]="" S["ENABLE_PCSC_TRUE"]="#" S["PCSC_LIBS"]="" S["PCSC_CFLAGS"]="" S["ENABLE_URING"]="no" S["ENABLE_URING_FALSE"]="" S["ENABLE_URING_TRUE"]="#" S["URING_LIBS"]="" S["URING_CFLAGS"]="" S["TALLOC_LIBS"]="-ltalloc" S["TALLOC_CFLAGS"]="" S["TLS_GCC_ARM_BUG_CFLAGS"]="" S["SYMBOL_VISIBILITY"]="-fvisibility=hidden" S["HAVE_DOXYGEN_FALSE"]="" S["HAVE_DOXYGEN_TRUE"]="#" S["DOXYGEN"]="/usr/bin/doxygen" S["LIBRARY_RT"]="" S["PTHREAD_CFLAGS"]="-pthread" S["PTHREAD_LIBS"]="" S["PTHREAD_CC"]="arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-n"\ "eon-poky-linux-gnueabi" S["ax_pthread_config"]="" S["BACKTRACE_LIB"]="" S["LIBRARY_DLSYM"]="-ldl " S["LIBRARY_DLOPEN"]="-ldl " S["ALLOCA"]="" S["HAVE_SYS_SOCKET_H"]="1" S["LTLDFLAGS_OSMOCTRL"]="-Wl,--version-script=$(srcdir)/libosmoctrl.map" S["LTLDFLAGS_OSMOCORE"]="-Wl,--version-script=$(srcdir)/libosmocore.map" S["LTLDFLAGS_OSMOCODING"]="-Wl,--version-script=$(srcdir)/libosmocoding.map" S["LTLDFLAGS_OSMOISDN"]="-Wl,--version-script=$(srcdir)/libosmoisdn.map" S["LTLDFLAGS_OSMOGSM"]="-Wl,--version-script=$(srcdir)/libosmogsm.map" S["LTLDFLAGS_OSMOGB"]="-Wl,--version-script=$(srcdir)/libosmogb.map" S["PKG_CONFIG_LIBDIR"]="" S["PKG_CONFIG_PATH"]="/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-pcu-oc2g/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysr"\ "oots/cortexa15hf-neon-poky-linux-gnueabi/usr/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/share/pkgconfig" S["PKG_CONFIG"]="/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config" S["PKG_CONFIG_INSTALLED"]="/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config" S["CPP"]="arm-poky-linux-gnueabi-gcc -E -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15h"\ "f-neon-poky-linux-gnueabi" S["LT_SYS_LIBRARY_PATH"]="" S["OTOOL64"]="" S["OTOOL"]="" S["LIPO"]="" S["NMEDIT"]="" S["DSYMUTIL"]="" S["MANIFEST_TOOL"]=":" S["RANLIB"]="arm-poky-linux-gnueabi-ranlib" S["ac_ct_AR"]="" S["AR"]="arm-poky-linux-gnueabi-ar" S["DLLTOOL"]="false" S["OBJDUMP"]="arm-poky-linux-gnueabi-objdump" S["LN_S"]="ln -s" S["NM"]="arm-poky-linux-gnueabi-nm" S["ac_ct_DUMPBIN"]="" S["DUMPBIN"]="" S["LD"]="arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi" S["FGREP"]="/usr/bin/grep -F" S["EGREP"]="/usr/bin/grep -E" S["GREP"]="/usr/bin/grep" S["SED"]="sed" S["host_os"]="linux-gnueabi" S["host_vendor"]="poky" S["host_cpu"]="arm" S["host"]="arm-poky-linux-gnueabi" S["build_os"]="linux-gnu" S["build_vendor"]="pc" S["build_cpu"]="x86_64" S["build"]="x86_64-pc-linux-gnu" S["LIBTOOL"]="$(top_builddir)/arm-poky-linux-gnueabi-libtool" S["am__fastdepCC_FALSE"]="#" S["am__fastdepCC_TRUE"]="" S["CCDEPMODE"]="depmode=gcc3" S["am__nodep"]="_no" S["AMDEPBACKSLASH"]="\\" S["AMDEP_FALSE"]="#" S["AMDEP_TRUE"]="" S["am__quote"]="" S["am__include"]="include" S["DEPDIR"]=".deps" S["OBJEXT"]="o" S["EXEEXT"]="" S["ac_ct_CC"]="" S["CPPFLAGS"]=" -DBUILDING_LIBOSMOCORE -Wall" S["LDFLAGS"]="-Wl,-O1" S["CFLAGS"]=" -O2 -pipe -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall" S["CC"]="arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-n"\ "eon-poky-linux-gnueabi" S["RELMAKE"]="-include osmo-release.mk" S["AM_BACKSLASH"]="\\" S["AM_DEFAULT_VERBOSITY"]="0" S["AM_DEFAULT_V"]="$(AM_DEFAULT_VERBOSITY)" S["AM_V"]="$(V)" S["am__untar"]="$${TAR-tar} xf -" S["am__tar"]="$${TAR-tar} chof - \"$$tardir\"" S["AMTAR"]="$${TAR-tar}" S["am__leading_dot"]="." S["SET_MAKE"]="" S["AWK"]="gawk" S["mkdir_p"]="$(MKDIR_P)" S["MKDIR_P"]="/usr/bin/mkdir -p" S["INSTALL_STRIP_PROGRAM"]="$(install_sh) -c -s" S["STRIP"]="arm-poky-linux-gnueabi-strip" S["install_sh"]="${SHELL} /build/libosmocore/install-sh" S["MAKEINFO"]="${SHELL} /build/libosmocore/missing makeinfo" S["AUTOHEADER"]="${SHELL} /build/libosmocore/missing autoheader" S["AUTOMAKE"]="${SHELL} /build/libosmocore/missing automake-1.15" S["AUTOCONF"]="${SHELL} /build/libosmocore/missing autoconf" S["ACLOCAL"]="${SHELL} /build/libosmocore/missing aclocal-1.15" S["VERSION"]="1.10.0.56-fc03" S["PACKAGE"]="libosmocore" S["CYGPATH_W"]="echo" S["am__isrc"]="" S["INSTALL_DATA"]="${INSTALL} -m 644" S["INSTALL_SCRIPT"]="${INSTALL}" S["INSTALL_PROGRAM"]="${INSTALL}" S["target_alias"]="arm-poky-linux-gnueabi" S["host_alias"]="arm-poky-linux-gnueabi" S["build_alias"]="x86_64-linux" S["LIBS"]="" S["ECHO_T"]="" S["ECHO_N"]="-n" S["ECHO_C"]="" S["DEFS"]="-DHAVE_CONFIG_H" S["mandir"]="${datarootdir}/man" S["localedir"]="${datarootdir}/locale" S["libdir"]="${exec_prefix}/lib" S["psdir"]="${docdir}" S["pdfdir"]="${docdir}" S["dvidir"]="${docdir}" S["htmldir"]="${docdir}" S["infodir"]="${datarootdir}/info" S["docdir"]="${datarootdir}/doc/${PACKAGE_TARNAME}" S["oldincludedir"]="/usr/include" S["includedir"]="${prefix}/include" S["localstatedir"]="${prefix}/var" S["sharedstatedir"]="${prefix}/com" S["sysconfdir"]="${prefix}/etc" S["datadir"]="${datarootdir}" S["datarootdir"]="${prefix}/share" S["libexecdir"]="${exec_prefix}/libexec" S["sbindir"]="${exec_prefix}/sbin" S["bindir"]="${exec_prefix}/bin" S["program_transform_name"]="s,x,x," S["prefix"]="/usr/local/jenkins-build/inst-osmo-pcu-oc2g" S["exec_prefix"]="${prefix}" S["PACKAGE_URL"]="" S["PACKAGE_BUGREPORT"]="openbsc@lists.osmocom.org" S["PACKAGE_STRING"]="libosmocore 1.10.0.56-fc03" S["PACKAGE_VERSION"]="1.10.0.56-fc03" S["PACKAGE_TARNAME"]="libosmocore" S["PACKAGE_NAME"]="libosmocore" S["PATH_SEPARATOR"]=":" S["SHELL"]="/bin/bash" _ACAWK cat >>"$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { D["PACKAGE_NAME"]=" \"libosmocore\"" D["PACKAGE_TARNAME"]=" \"libosmocore\"" D["PACKAGE_VERSION"]=" \"1.10.0.56-fc03\"" D["PACKAGE_STRING"]=" \"libosmocore 1.10.0.56-fc03\"" D["PACKAGE_BUGREPORT"]=" \"openbsc@lists.osmocom.org\"" D["PACKAGE_URL"]=" \"\"" D["PACKAGE"]=" \"libosmocore\"" D["VERSION"]=" \"1.10.0.56-fc03\"" D["STDC_HEADERS"]=" 1" D["HAVE_SYS_TYPES_H"]=" 1" D["HAVE_SYS_STAT_H"]=" 1" D["HAVE_STDLIB_H"]=" 1" D["HAVE_STRING_H"]=" 1" D["HAVE_MEMORY_H"]=" 1" D["HAVE_STRINGS_H"]=" 1" D["HAVE_INTTYPES_H"]=" 1" D["HAVE_STDINT_H"]=" 1" D["HAVE_UNISTD_H"]=" 1" D["HAVE_DLFCN_H"]=" 1" D["LT_OBJDIR"]=" \".libs/\"" D["STDC_HEADERS"]=" 1" D["HAVE_EXECINFO_H"]=" 1" D["HAVE_POLL_H"]=" 1" D["HAVE_SYS_SELECT_H"]=" 1" D["HAVE_SYS_SOCKET_H"]=" 1" D["HAVE_SYS_SIGNALFD_H"]=" 1" D["HAVE_SYS_EVENTFD_H"]=" 1" D["HAVE_SYS_TIMERFD_H"]=" 1" D["HAVE_SYSLOG_H"]=" 1" D["HAVE_CTYPE_H"]=" 1" D["HAVE_NETINET_TCP_H"]=" 1" D["HAVE_NETINET_IN_H"]=" 1" D["HAVE_ALLOCA_H"]=" 1" D["HAVE_ALLOCA"]=" 1" D["HAVE_PTHREAD_PRIO_INHERIT"]=" 1" D["HAVE_PTHREAD"]=" 1" D["HAVE_PTHREAD_GETNAME_NP"]=" 1" D["HAVE_CLOCK_GETTIME"]=" 1" D["HAVE_DECL_SYS_GETRANDOM"]=" 1" D["HAVE_LOCALTIME_R"]=" 1" D["HAVE_TM_GMTOFF_IN_TM"]=" 1" D["HAVE_LIBSCTP"]=" 1" D["HAVE_TCP_INFO_TCPI_NOTSENT_BYTES"]=" 1" D["HAVE_TCP_INFO_TCPI_RWND_LIMITED"]=" 1" D["HAVE_TCP_INFO_TCPI_SNDBUF_LIMITED"]=" 1" for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*([\t (]|$)/ { line = $ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ac_datarootdir_hack=' s&@datadir@&${datarootdir}&g s&@docdir@&${datarootdir}/doc/${PACKAGE_TARNAME}&g s&@infodir@&${datarootdir}/info&g s&@localedir@&${datarootdir}/locale&g s&@mandir@&${datarootdir}/man&g s&\${datarootdir}&${prefix}/share&g' ;; esac ac_sed_extra="/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// } :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "tests/atconfig":C) cat >tests/atconfig </dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; "libtool":C) # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi cfgfile=${ofile}T trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # Generated automatically by $as_me ($PACKAGE) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # Provide generalized library-building support services. # Written by Gordon Matzigkeit, 1996 # Copyright (C) 2014 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program or library that is built # using GNU Libtool, you may include this file under the same # distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # The names of the tagged configurations supported by this script. available_tags='' # Configured defaults for sys_lib_dlsearch_path munging. : \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} # ### BEGIN LIBTOOL CONFIG # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision # What type of objects to build. pic_mode=$pic_mode # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # Shared archive member basename,for filename based shared library versioning on AIX. shared_archive_member_spec=$shared_archive_member_spec # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # An echo program that protects backslashes. ECHO=$lt_ECHO # The PATH separator for the build system. PATH_SEPARATOR=$lt_PATH_SEPARATOR # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="\$SED -e 1s/^X//" # A grep program that handles long lines. GREP=$lt_GREP # An ERE matcher. EGREP=$lt_EGREP # A literal string matcher. FGREP=$lt_FGREP # A BSD- or MS-compatible name lister. NM=$lt_NM # Whether we need soft or hard links. LN_S=$lt_LN_S # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Object file suffix (normally "o"). objext=$ac_objext # Executable file suffix (normally ""). exeext=$exeext # whether the shell understands "unset". lt_unset=$lt_unset # turn spaces into newlines. SP2NL=$lt_lt_SP2NL # turn newlines into spaces. NL2SP=$lt_lt_NL2SP # convert \$build file names to \$host format. to_host_file_cmd=$lt_cv_to_host_file_cmd # convert \$build files to toolchain format. to_tool_file_cmd=$lt_cv_to_tool_file_cmd # An object symbol dumper. OBJDUMP=$lt_OBJDUMP # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method = "file_magic". file_magic_cmd=$lt_file_magic_cmd # How to find potential files when deplibs_check_method = "file_magic". file_magic_glob=$lt_file_magic_glob # Find potential files using nocaseglob when deplibs_check_method = "file_magic". want_nocaseglob=$lt_want_nocaseglob # DLL creation program. DLLTOOL=$lt_DLLTOOL # Command to associate shared and link libraries. sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd # The archiver. AR=$lt_AR # Flags to create an archive. AR_FLAGS=$lt_AR_FLAGS # How to feed a file listing to the archiver. archiver_list_spec=$lt_archiver_list_spec # A symbol stripping program. STRIP=$lt_STRIP # Commands used to install an old-style archive. RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Whether to use a lock for old archive extraction. lock_old_archive_extraction=$lock_old_archive_extraction # A C compiler. LTCC=$lt_CC # LTCC compiler flags. LTCFLAGS=$lt_CFLAGS # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm into a list of symbols to manually relocate. global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix # The name lister interface. nm_interface=$lt_lt_cv_nm_interface # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec # The root where to search for dependent libraries,and where our libraries should be installed. lt_sysroot=$lt_sysroot # Command to truncate a binary pipe. lt_truncate_bin=$lt_lt_cv_truncate_bin # The name of the directory that contains temporary libtool files. objdir=$objdir # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks # Manifest tool. MANIFEST_TOOL=$lt_MANIFEST_TOOL # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL # Tool to change global to local symbols on Mac OS X. NMEDIT=$lt_NMEDIT # Tool to manipulate fat objects and archives on Mac OS X. LIPO=$lt_LIPO # ldd/readelf like tool for Mach-O binaries on Mac OS X. OTOOL=$lt_OTOOL # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. OTOOL64=$lt_OTOOL64 # Old archive suffix (normally "a"). libext=$libext # Shared library suffix (normally ".so"). shrext_cmds=$lt_shrext_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Variables whose values should be saved in libtool wrapper scripts and # restored at link time. variables_saved_for_relink=$lt_variables_saved_for_relink # Do we need the "lib" prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Library versioning type. version_type=$version_type # Shared library runtime path variable. runpath_var=$runpath_var # Shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Permission mode override for installation of shared libraries. install_override_mode=$lt_install_override_mode # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds # Command to use after uninstallation of a shared archive. postuninstall_cmds=$lt_postuninstall_cmds # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # As "finish_cmds", except a single script fragment to be evaled but # not shown. finish_eval=$lt_finish_eval # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Detected run-time system search path for libraries. sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path # Explicit LT_SYS_LIBRARY_PATH set during ./configure time. configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds # A language specific compiler. CC=$lt_compiler # Is the compiler the GNU compiler? with_gcc=$GCC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct # Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \$shlibpath_var if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds # Specify filename containing input files. file_list_spec=$lt_file_list_spec # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # ### END LIBTOOL CONFIG _LT_EOF cat <<'_LT_EOF' >> "$cfgfile" # ### BEGIN FUNCTIONS SHARED WITH CONFIGURE # func_munge_path_list VARIABLE PATH # ----------------------------------- # VARIABLE is name of variable containing _space_ separated list of # directories to be munged by the contents of PATH, which is string # having a format: # "DIR[:DIR]:" # string "DIR[ DIR]" will be prepended to VARIABLE # ":DIR[:DIR]" # string "DIR[ DIR]" will be appended to VARIABLE # "DIRP[:DIRP]::[DIRA:]DIRA" # string "DIRP[ DIRP]" will be prepended to VARIABLE and string # "DIRA[ DIRA]" will be appended to VARIABLE # "DIR[:DIR]" # VARIABLE will be replaced by "DIR[ DIR]" func_munge_path_list () { case x$2 in x) ;; *:) eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" ;; x:*) eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" ;; *::*) eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" ;; *) eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" ;; esac } # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. func_cc_basename () { for cc_temp in $*""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` } # ### END FUNCTIONS SHARED WITH CONFIGURE _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac ltmain=$ac_aux_dir/ltmain.sh # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ;; esac done # for ac_tag as_fn_exit 0