Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)

Failing for the past 211 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=14037): Process ended prematurely: osmo-stp_10.42.42.5(pid=14037) [trial-2349↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14037)]

Standard Output

----------------------------------------------
trial-2349 gprs:trx-lms-limenet-micro ping.py
----------------------------------------------
21:01:28.361017 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
21:01:28.372877 tst       gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
21:01:28.511743 tst                          ping.py: using LAC 16784
21:01:28.637136 tst                          ping.py: using RAC 209
21:01:28.759298 tst                          ping.py: using CellId 16784
21:01:28.881355 tst                          ping.py: using BVCI 16785
21:01:28.905390 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
21:01:28.916469 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
21:01:28.927480 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
21:01:28.938509 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
21:01:28.949361 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
21:01:28.960397 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
21:01:28.971551 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
21:01:28.982587 tst       gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
21:01:29.266014 tst                       ping.py:19: start network...
21:01:29.396750 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
21:01:29.897703 run         create_hlr_db(pid=14031): Launched
21:01:30.080753 bus                          /gobi_6: Setting Powered False
21:01:31.141549 run         create_hlr_db(pid=14031): Terminated: ok {rc=0}
21:01:31.594965 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14033): Launched
21:01:32.012881 run   osmo-hlr_10.42.42.2(pid=14034): Launched
21:01:32.170110 run              osmo-stp_10.42.42.5: Starting osmo-stp
21:01:32.709941 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14036): Launched
21:01:33.001358 run   osmo-stp_10.42.42.5(pid=14037): Launched
21:01:33.106981 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
21:01:33.615109 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14039): Launched
21:01:33.718607 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
21:01:33.973742 run              patchelf(pid=14040): Launched
21:01:34.145601 run   osmo-stp_10.42.42.5(pid=14037): ERR: Terminated: ERROR {rc=1}  [trial-2349↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14037)]
21:01:34.270836 run   osmo-stp_10.42.42.5(pid=14037): stdout: 
| (launched: 2022-12-08_21:01:32.858536)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:01:34.396399 run   osmo-stp_10.42.42.5(pid=14037): stderr: 
| �[0;m�[38;5;43m20221208210133026 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221208210133026 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221208210133026 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221208210133026 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208210133027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208210133027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208210133027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:01:34.517478 run   osmo-stp_10.42.42.5(pid=14037): stdout: 
| (launched: 2022-12-08_21:01:32.858536)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:01:34.637692 run   osmo-stp_10.42.42.5(pid=14037): stderr: 
| �[0;m�[38;5;43m20221208210133026 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221208210133026 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221208210133026 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221208210133026 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208210133027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208210133027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208210133027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:01:34.777571 run              patchelf(pid=14040): Terminating (SIGINT)
21:01:34.941854 run              patchelf(pid=14040): Terminated: ok {rc=0}
21:01:34.971792 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=14037): Process ended prematurely: osmo-stp_10.42.42.5(pid=14037) [trial-2349↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14037)]  [trial-2349↪gprs:trx-lms-limenet-micro↪ping.py:22]
21:01:34.980365 tst                       ping.py:22: Test FAILED (6.6 sec)
21:01:35.040403 run   osmo-hlr_10.42.42.2(pid=14034): ERR: Terminated: ERROR {rc=237}  [trial-2349↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14034)]
21:01:35.089282 run   osmo-hlr_10.42.42.2(pid=14034): stdout: 
| (launched: 2022-12-08_21:01:31.756304) 
21:01:35.138848 run   osmo-hlr_10.42.42.2(pid=14034): stderr: 
| �[0;m�[1;31m20221208210132033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221208210132033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221208210132033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221208210132033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221208210132034 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221208210132034 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221208210132056 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221208210132071 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221208210132071 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221208210132071 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
21:01:35.180599 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14033): Terminating (SIGTERM)
21:01:35.220085 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14036): Terminating (SIGTERM)
21:01:35.259650 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14039): Terminating (SIGTERM)
21:01:35.269029 ---      ParallelTerminationStrategy: PID 14033 died...
21:01:35.322652 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14033): Terminated: ok {rc=0}
21:01:35.332111 ---      ParallelTerminationStrategy: PID 14036 died...
21:01:35.384912 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14036): Terminated: ok {rc=0}
21:01:35.394551 ---      ParallelTerminationStrategy: PID 14039 died...
21:01:35.447795 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14039): Terminated: ok {rc=0}
21:01:35.531043 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14037): Process ended prematurely: osmo-stp_10.42.42.5(pid=14037) [trial-2349↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14037)]