
----------------------------------------------
trial-2351 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
23:55:08.727382 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:08.738495 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
23:55:08.879944 tst         cs_paging_gprs_active.py: using LAC 17634
23:55:09.006428 tst         cs_paging_gprs_active.py: using RAC 39
23:55:09.132712 tst         cs_paging_gprs_active.py: using CellId 17634
23:55:09.254396 tst         cs_paging_gprs_active.py: using BVCI 17635
23:55:09.277538 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:09.288582 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:09.299525 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:09.311200 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:09.322985 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:09.334766 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:09.345789 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:09.356464 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:09.368593 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
23:55:09.486280 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
23:55:09.763069 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
23:55:09.889341 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
23:55:10.200622 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30903): Launched
23:55:10.460364 run iperf3-srv_10.42.42.10(pid=30904): Launched
23:55:10.645167 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
23:55:10.771627 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
23:55:11.084905 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30905): Launched
23:55:11.343711 run iperf3-srv_10.42.42.10(pid=30906): Launched
23:55:11.527711 tst      cs_paging_gprs_active.py:38: start network...
23:55:11.653415 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:55:12.127355 run         create_hlr_db(pid=30907): Launched
23:55:12.301783 bus                          /gobi_6: Setting Powered False
23:55:13.322028 run         create_hlr_db(pid=30907): Terminated: ok {rc=0}
23:55:13.749189 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30909): Launched
23:55:14.070972 run   osmo-hlr_10.42.42.2(pid=30910): Launched
23:55:14.189187 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:55:14.746899 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30912): Launched
23:55:15.069195 run   osmo-stp_10.42.42.5(pid=30913): Launched
23:55:15.188550 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:55:15.747744 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30915): Launched
23:55:15.863923 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:55:16.185418 run              patchelf(pid=30916): Launched
23:55:16.376456 run   osmo-stp_10.42.42.5(pid=30913): ERR: Terminated: ERROR {rc=1}  [trial-2351↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30913)]
23:55:16.515860 run   osmo-stp_10.42.42.5(pid=30913): stdout: 
| (launched: 2022-12-08_23:55:14.911189)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:55:16.655347 run   osmo-stp_10.42.42.5(pid=30913): stderr: 
| [0;m[38;5;43m20221208235515104 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221208235515104 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221208235515104 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221208235515106 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208235515106 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208235515106 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208235515106 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:55:16.790690 run   osmo-stp_10.42.42.5(pid=30913): stdout: 
| (launched: 2022-12-08_23:55:14.911189)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:55:16.924997 run   osmo-stp_10.42.42.5(pid=30913): stderr: 
| [0;m[38;5;43m20221208235515104 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221208235515104 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221208235515104 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221208235515106 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208235515106 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208235515106 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208235515106 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:55:17.080260 run              patchelf(pid=30916): Terminating (SIGINT)
23:55:17.262204 run              patchelf(pid=30916): Terminated: ok {rc=0}
23:55:17.295890 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30913): Process ended prematurely: osmo-stp_10.42.42.5(pid=30913) [trial-2351↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30913)]  [trial-2351↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
23:55:17.306400 tst      cs_paging_gprs_active.py:38: Test FAILED (8.6 sec)
23:55:17.369312 run   osmo-hlr_10.42.42.2(pid=30910): ERR: Terminated: ERROR {rc=237}  [trial-2351↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30910)]
23:55:17.420112 run   osmo-hlr_10.42.42.2(pid=30910): stdout: 
| (launched: 2022-12-08_23:55:13.913666) 
23:55:17.471745 run   osmo-hlr_10.42.42.2(pid=30910): stderr: 
| [0;m[1;31m20221208235514112 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221208235514112 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221208235514112 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221208235514112 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221208235514112 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221208235514112 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221208235514124 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221208235514134 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221208235514134 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221208235514134 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:55:17.515474 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30903): Terminating (SIGTERM)
23:55:17.556511 run iperf3-srv_10.42.42.10(pid=30904): Terminating (SIGTERM)
23:55:17.597886 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30905): Terminating (SIGTERM)
23:55:17.638997 run iperf3-srv_10.42.42.10(pid=30906): Terminating (SIGTERM)
23:55:17.680258 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30909): Terminating (SIGTERM)
23:55:17.721962 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30912): Terminating (SIGTERM)
23:55:17.763247 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30915): Terminating (SIGTERM)
23:55:17.772775 ---      ParallelTerminationStrategy: PID 30903 died...
23:55:17.828362 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30903): Terminated: ok {rc=0}
23:55:17.838436 ---      ParallelTerminationStrategy: PID 30904 died...
23:55:17.893269 run iperf3-srv_10.42.42.10(pid=30904): Terminated {rc=256}
23:55:17.903216 ---      ParallelTerminationStrategy: PID 30905 died...
23:55:17.958040 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30905): Terminated: ok {rc=0}
23:55:17.967999 ---      ParallelTerminationStrategy: PID 30906 died...
23:55:18.022622 run iperf3-srv_10.42.42.10(pid=30906): Terminated {rc=256}
23:55:18.032522 ---      ParallelTerminationStrategy: PID 30909 died...
23:55:18.087324 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30909): Terminated: ok {rc=0}
23:55:18.097364 ---      ParallelTerminationStrategy: PID 30912 died...
23:55:18.152318 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30912): Terminated: ok {rc=0}
23:55:18.162729 ---      ParallelTerminationStrategy: PID 30915 died...
23:55:18.217700 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30915): Terminated: ok {rc=0}
23:55:18.304259 bus                          /gobi_0: Setting Powered False
23:55:19.409132 bus                          /gobi_0: Setting Powered False
23:55:20.515879 bus                          /gobi_6: Setting Powered False
