Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)

Failing for the past 218 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=9831): Process ended prematurely: osmo-stp_10.42.42.5(pid=9831) [trial-2356↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9831)]

Standard Output

----------------------------------------------
trial-2356 gprs:trx-lms-limenet-micro ping.py
----------------------------------------------
07:52:21.797448 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
07:52:21.809542 tst       gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
07:52:21.945907 tst                          ping.py: using LAC 20011
07:52:22.071896 tst                          ping.py: using RAC 121
07:52:22.193931 tst                          ping.py: using CellId 20011
07:52:22.316178 tst                          ping.py: using BVCI 20012
07:52:22.340212 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
07:52:22.351614 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
07:52:22.362785 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
07:52:22.373901 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
07:52:22.384920 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
07:52:22.395921 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
07:52:22.407106 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
07:52:22.418170 tst       gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
07:52:22.688060 tst                       ping.py:19: start network...
07:52:22.809643 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:52:23.274374 run          create_hlr_db(pid=9825): Launched
07:52:23.442679 bus                          /gobi_6: Setting Powered False
07:52:24.465054 run          create_hlr_db(pid=9825): Terminated: ok {rc=0}
07:52:24.855335 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9827): Launched
07:52:25.148366 run    osmo-hlr_10.42.42.2(pid=9828): Launched
07:52:25.261020 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:52:25.780110 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9830): Launched
07:52:26.074074 run    osmo-stp_10.42.42.5(pid=9831): Launched
07:52:26.181218 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:52:26.689864 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9833): Launched
07:52:26.794114 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:52:27.049366 run               patchelf(pid=9834): Launched
07:52:27.220089 run    osmo-stp_10.42.42.5(pid=9831): ERR: Terminated: ERROR {rc=1}  [trial-2356↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9831)]
07:52:27.344887 run    osmo-stp_10.42.42.5(pid=9831): stdout: 
| (launched: 2022-12-09_07:52:25.928806)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:52:27.470303 run    osmo-stp_10.42.42.5(pid=9831): stderr: 
| �[0;m�[38;5;43m20221209075226098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209075226098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209075226098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209075226099 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209075226099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209075226099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209075226099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:52:27.591243 run    osmo-stp_10.42.42.5(pid=9831): stdout: 
| (launched: 2022-12-09_07:52:25.928806)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:52:27.711066 run    osmo-stp_10.42.42.5(pid=9831): stderr: 
| �[0;m�[38;5;43m20221209075226098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209075226098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209075226098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209075226099 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209075226099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209075226099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209075226099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:52:27.850848 run               patchelf(pid=9834): Terminating (SIGINT)
07:52:28.014240 run               patchelf(pid=9834): Terminated: ok {rc=0}
07:52:28.044367 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=9831): Process ended prematurely: osmo-stp_10.42.42.5(pid=9831) [trial-2356↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9831)]  [trial-2356↪gprs:trx-lms-limenet-micro↪ping.py:22]
07:52:28.053144 tst                       ping.py:22: Test FAILED (6.2 sec)
07:52:28.113566 run    osmo-hlr_10.42.42.2(pid=9828): ERR: Terminated: ERROR {rc=237}  [trial-2356↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9828)]
07:52:28.162889 run    osmo-hlr_10.42.42.2(pid=9828): stdout: 
| (launched: 2022-12-09_07:52:25.003377) 
07:52:28.212613 run    osmo-hlr_10.42.42.2(pid=9828): stderr: 
| �[0;m�[1;31m20221209075225176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209075225176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209075225176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209075225176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209075225177 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209075225177 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209075225189 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209075225198 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209075225198 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209075225198 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:52:28.254195 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9827): Terminating (SIGTERM)
07:52:28.293669 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9830): Terminating (SIGTERM)
07:52:28.333061 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9833): Terminating (SIGTERM)
07:52:28.342473 ---      ParallelTerminationStrategy: PID 9827 died...
07:52:28.395286 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9827): Terminated: ok {rc=0}
07:52:28.404855 ---      ParallelTerminationStrategy: PID 9830 died...
07:52:28.457217 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9830): Terminated: ok {rc=0}
07:52:28.466916 ---      ParallelTerminationStrategy: PID 9833 died...
07:52:28.519632 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9833): Terminated: ok {rc=0}
07:52:28.608070 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9831): Process ended prematurely: osmo-stp_10.42.42.5(pid=9831) [trial-2356↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9831)]