
----------------------------------------------
trial-2381 gprs:nanobts+band-1900+mod-bts0-egprs iperf3.py
----------------------------------------------
20:13:47.378010 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:13:47.390205 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
20:13:47.531355 tst                        iperf3.py: using LAC 31230
20:13:47.654226 tst                        iperf3.py: using RAC 120
20:13:47.774390 tst                        iperf3.py: using CellId 31230
20:13:47.894442 tst                        iperf3.py: using BVCI 31231
20:13:47.917884 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:13:47.928846 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:13:47.939801 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:13:47.950721 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:13:47.961927 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:13:47.972569 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:13:47.983632 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:13:47.994551 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
20:13:48.005547 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
20:13:48.305412 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
20:13:48.445287 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
20:13:48.793861 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23092): Launched
20:13:49.083774 run iperf3-srv_10.42.42.10(pid=23093): Launched
20:13:49.287711 tst                      iperf3.py:8: start network...
20:13:49.426482 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
20:13:49.948045 run         create_hlr_db(pid=23094): Launched
20:13:50.140220 bus                          /gobi_6: Setting Powered False
20:13:51.160794 run         create_hlr_db(pid=23094): Terminated: ok {rc=0}
20:13:51.579921 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23096): Launched
20:13:51.892277 run   osmo-hlr_10.42.42.2(pid=23097): Launched
20:13:52.006203 run              osmo-stp_10.42.42.5: Starting osmo-stp
20:13:52.547317 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23099): Launched
20:13:52.858281 run   osmo-stp_10.42.42.5(pid=23100): Launched
20:13:52.970264 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:13:53.508938 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23102): Launched
20:13:53.618075 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:13:53.889579 run              patchelf(pid=23103): Launched
20:13:54.070070 run   osmo-stp_10.42.42.5(pid=23100): ERR: Terminated: ERROR {rc=1}  [trial-2381↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23100)]
20:13:54.202004 run   osmo-stp_10.42.42.5(pid=23100): stdout: 
| (launched: 2022-12-12_20:13:52.703191)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:13:54.335281 run   osmo-stp_10.42.42.5(pid=23100): stderr: 
| [0;m[38;5;43m20221212201352876 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212201352876 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212201352876 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212201352876 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212201352877 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212201352877 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212201352877 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:13:54.462633 run   osmo-stp_10.42.42.5(pid=23100): stdout: 
| (launched: 2022-12-12_20:13:52.703191)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:13:54.588774 run   osmo-stp_10.42.42.5(pid=23100): stderr: 
| [0;m[38;5;43m20221212201352876 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212201352876 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212201352876 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212201352876 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212201352877 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212201352877 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212201352877 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:13:54.735697 run              patchelf(pid=23103): Terminating (SIGINT)
20:13:54.908298 run              patchelf(pid=23103): Terminated: ok {rc=0}
20:13:54.940066 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=23100): Process ended prematurely: osmo-stp_10.42.42.5(pid=23100) [trial-2381↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23100)]  [trial-2381↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8]
20:13:54.949419 tst                      iperf3.py:8: Test FAILED (7.6 sec)
20:13:55.010043 run   osmo-hlr_10.42.42.2(pid=23097): ERR: Terminated: ERROR {rc=237}  [trial-2381↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23097)]
20:13:55.059560 run   osmo-hlr_10.42.42.2(pid=23097): stdout: 
| (launched: 2022-12-12_20:13:51.736642) 
20:13:55.109756 run   osmo-hlr_10.42.42.2(pid=23097): stderr: 
| [0;m[1;31m20221212201351918 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221212201351919 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221212201351919 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221212201351919 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221212201351919 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221212201351919 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221212201351931 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:nanobts+band-1900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221212201351940 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212201351940 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212201351940 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
20:13:55.152237 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23092): Terminating (SIGTERM)
20:13:55.192159 run iperf3-srv_10.42.42.10(pid=23093): Terminating (SIGTERM)
20:13:55.232119 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23096): Terminating (SIGTERM)
20:13:55.271955 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23099): Terminating (SIGTERM)
20:13:55.311843 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23102): Terminating (SIGTERM)
20:13:55.321250 ---      ParallelTerminationStrategy: PID 23092 died...
20:13:55.374880 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23092): Terminated: ok {rc=0}
20:13:55.384495 ---      ParallelTerminationStrategy: PID 23093 died...
20:13:55.437895 run iperf3-srv_10.42.42.10(pid=23093): Terminated {rc=256}
20:13:55.447539 ---      ParallelTerminationStrategy: PID 23096 died...
20:13:55.500699 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23096): Terminated: ok {rc=0}
20:13:55.510344 ---      ParallelTerminationStrategy: PID 23099 died...
20:13:55.563498 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23099): Terminated: ok {rc=0}
20:13:55.573215 ---      ParallelTerminationStrategy: PID 23102 died...
20:13:55.626281 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23102): Terminated: ok {rc=0}
20:13:55.716130 bus                          /gobi_6: Setting Powered False
