
----------------------------------------------
trial-2381 gprs:trx-lms iperf3m4.py
----------------------------------------------
19:57:51.761403 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:57:51.773309 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
19:57:51.917694 tst                      iperf3m4.py: using LAC 31146
19:57:52.046083 tst                      iperf3m4.py: using RAC 36
19:57:52.170576 tst                      iperf3m4.py: using CellId 31146
19:57:52.296558 tst                      iperf3m4.py: using BVCI 31147
19:57:52.321138 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:57:52.332346 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:57:52.343337 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:57:52.354618 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:57:52.365787 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:57:52.376922 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:57:52.388513 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:57:52.399656 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:57:52.411025 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
19:57:52.531664 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
19:57:52.655553 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
19:57:52.775123 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
19:57:53.053632 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
19:57:53.178908 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
19:57:53.492678 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21713): Launched
19:57:53.752450 run iperf3-srv_10.42.42.10(pid=21714): Launched
19:57:53.935294 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
19:57:54.059501 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
19:57:54.372477 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21715): Launched
19:57:54.632118 run iperf3-srv_10.42.42.10(pid=21716): Launched
19:57:54.815322 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
19:57:54.939893 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
19:57:55.254832 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21717): Launched
19:57:55.515570 run iperf3-srv_10.42.42.10(pid=21718): Launched
19:57:55.697566 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
19:57:55.821670 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
19:57:56.134396 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21719): Launched
19:57:56.396073 run iperf3-srv_10.42.42.10(pid=21720): Launched
19:57:56.578726 tst                    iperf3m4.py:8: start network...
19:57:56.704283 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:57:57.186878 run         create_hlr_db(pid=21721): Launched
19:57:57.358960 bus                          /gobi_6: Setting Powered False
19:57:58.381996 run         create_hlr_db(pid=21721): Terminated: ok {rc=0}
19:57:58.814518 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21723): Launched
19:57:59.140366 run   osmo-hlr_10.42.42.2(pid=21724): Launched
19:57:59.260821 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:57:59.826434 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21726): Launched
19:58:00.151893 run   osmo-stp_10.42.42.5(pid=21727): Launched
19:58:00.269071 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:58:00.833962 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21729): Launched
19:58:00.973507 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:58:01.261453 run              patchelf(pid=21730): Launched
19:58:01.455605 run   osmo-stp_10.42.42.5(pid=21727): ERR: Terminated: ERROR {rc=1}  [trial-2381↪gprs:trx-lms↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21727)]
19:58:01.599819 run   osmo-stp_10.42.42.5(pid=21727): stdout: 
| (launched: 2022-12-12_19:57:59.990364)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:58:01.742783 run   osmo-stp_10.42.42.5(pid=21727): stderr: 
| [0;m[38;5;43m20221212195800180 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212195800180 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212195800181 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212195800181 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212195800181 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212195800182 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212195800182 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:58:01.880610 run   osmo-stp_10.42.42.5(pid=21727): stdout: 
| (launched: 2022-12-12_19:57:59.990364)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:58:02.017427 run   osmo-stp_10.42.42.5(pid=21727): stderr: 
| [0;m[38;5;43m20221212195800180 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212195800180 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212195800181 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212195800181 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212195800181 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212195800182 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212195800182 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:58:02.174755 run              patchelf(pid=21730): Terminating (SIGINT)
19:58:02.356101 run              patchelf(pid=21730): Terminated: ok {rc=0}
19:58:02.389764 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=21727): Process ended prematurely: osmo-stp_10.42.42.5(pid=21727) [trial-2381↪gprs:trx-lms↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21727)]  [trial-2381↪gprs:trx-lms↪iperf3m4.py:8]
19:58:02.400035 tst                    iperf3m4.py:8: Test FAILED (10.7 sec)
19:58:02.464930 run   osmo-hlr_10.42.42.2(pid=21724): ERR: Terminated: ERROR {rc=237}  [trial-2381↪gprs:trx-lms↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21724)]
19:58:02.517349 run   osmo-hlr_10.42.42.2(pid=21724): stdout: 
| (launched: 2022-12-12_19:57:58.978910) 
19:58:02.570376 run   osmo-hlr_10.42.42.2(pid=21724): stderr: 
| [0;m[1;31m20221212195759177 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221212195759177 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221212195759177 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221212195759177 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221212195759177 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221212195759177 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221212195759191 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-lms/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221212195759199 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212195759199 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212195759199 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:58:02.615315 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21713): Terminating (SIGTERM)
19:58:02.657677 run iperf3-srv_10.42.42.10(pid=21714): Terminating (SIGTERM)
19:58:02.699699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21715): Terminating (SIGTERM)
19:58:02.742077 run iperf3-srv_10.42.42.10(pid=21716): Terminating (SIGTERM)
19:58:02.784275 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21717): Terminating (SIGTERM)
19:58:02.826803 run iperf3-srv_10.42.42.10(pid=21718): Terminating (SIGTERM)
19:58:02.869215 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21719): Terminating (SIGTERM)
19:58:02.911412 run iperf3-srv_10.42.42.10(pid=21720): Terminating (SIGTERM)
19:58:02.953723 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21723): Terminating (SIGTERM)
19:58:02.996019 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21726): Terminating (SIGTERM)
19:58:03.038784 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21729): Terminating (SIGTERM)
19:58:03.048706 ---      ParallelTerminationStrategy: PID 21713 died...
19:58:03.105994 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21713): Terminated: ok {rc=0}
19:58:03.116593 ---      ParallelTerminationStrategy: PID 21714 died...
19:58:03.173688 run iperf3-srv_10.42.42.10(pid=21714): Terminated {rc=256}
19:58:03.183917 ---      ParallelTerminationStrategy: PID 21715 died...
19:58:03.240471 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21715): Terminated: ok {rc=0}
19:58:03.251024 ---      ParallelTerminationStrategy: PID 21716 died...
19:58:03.307842 run iperf3-srv_10.42.42.10(pid=21716): Terminated {rc=256}
19:58:03.318485 ---      ParallelTerminationStrategy: PID 21717 died...
19:58:03.375870 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21717): Terminated: ok {rc=0}
19:58:03.386191 ---      ParallelTerminationStrategy: PID 21718 died...
19:58:03.443565 run iperf3-srv_10.42.42.10(pid=21718): Terminated {rc=256}
19:58:03.453861 ---      ParallelTerminationStrategy: PID 21719 died...
19:58:03.511081 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21719): Terminated: ok {rc=0}
19:58:03.521490 ---      ParallelTerminationStrategy: PID 21720 died...
19:58:03.578850 run iperf3-srv_10.42.42.10(pid=21720): Terminated {rc=256}
19:58:03.589458 ---      ParallelTerminationStrategy: PID 21723 died...
19:58:03.646432 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21723): Terminated: ok {rc=0}
19:58:03.656753 ---      ParallelTerminationStrategy: PID 21726 died...
19:58:03.713601 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21726): Terminated: ok {rc=0}
19:58:03.724277 ---      ParallelTerminationStrategy: PID 21729 died...
19:58:03.781497 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21729): Terminated: ok {rc=0}
19:58:03.870556 bus                          /gobi_4: Setting Powered False
19:58:04.975743 bus                          /gobi_4: Setting Powered False
19:58:06.087349 bus                          /gobi_1: Setting Powered False
19:58:07.195658 bus                          /gobi_1: Setting Powered False
19:58:08.308476 bus                          /gobi_0: Setting Powered False
19:58:09.411578 bus                          /gobi_0: Setting Powered False
19:58:10.524576 bus                          /gobi_6: Setting Powered False
