
----------------------------------------------
trial-2381 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
19:52:37.795533 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:52:37.807350 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
19:52:37.954518 tst         cs_paging_gprs_active.py: using LAC 31117
19:52:38.073828 tst         cs_paging_gprs_active.py: using RAC 7
19:52:38.198229 tst         cs_paging_gprs_active.py: using CellId 31117
19:52:38.314021 tst         cs_paging_gprs_active.py: using BVCI 31118
19:52:38.336705 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:52:38.347970 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:52:38.359119 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:52:38.370299 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:52:38.381533 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:52:38.392527 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:52:38.403706 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:52:38.414782 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:52:38.426105 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
19:52:38.543412 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
19:52:38.819047 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
19:52:38.943957 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
19:52:39.256288 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21073): Launched
19:52:39.515132 run iperf3-srv_10.42.42.10(pid=21074): Launched
19:52:39.697490 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
19:52:39.821797 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
19:52:40.133866 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21075): Launched
19:52:40.393752 run iperf3-srv_10.42.42.10(pid=21076): Launched
19:52:40.575859 tst      cs_paging_gprs_active.py:38: start network...
19:52:40.699703 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:52:41.182056 run         create_hlr_db(pid=21077): Launched
19:52:41.355011 bus                          /gobi_6: Setting Powered False
19:52:42.377451 run         create_hlr_db(pid=21077): Terminated: ok {rc=0}
19:52:42.808523 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21079): Launched
19:52:43.132189 run   osmo-hlr_10.42.42.2(pid=21080): Launched
19:52:43.252548 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:52:43.812768 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21082): Launched
19:52:44.135123 run   osmo-stp_10.42.42.5(pid=21083): Launched
19:52:44.252148 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:52:44.814984 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21085): Launched
19:52:44.929799 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:52:45.212575 run              patchelf(pid=21086): Launched
19:52:45.401675 run   osmo-stp_10.42.42.5(pid=21083): ERR: Terminated: ERROR {rc=1}  [trial-2381↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21083)]
19:52:45.539682 run   osmo-stp_10.42.42.5(pid=21083): stdout: 
| (launched: 2022-12-12_19:52:43.976166)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:52:45.678589 run   osmo-stp_10.42.42.5(pid=21083): stderr: 
| [0;m[38;5;43m20221212195244164 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212195244164 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212195244164 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212195244164 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212195244165 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212195244165 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212195244165 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:52:45.811430 run   osmo-stp_10.42.42.5(pid=21083): stdout: 
| (launched: 2022-12-12_19:52:43.976166)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:52:45.959098 run   osmo-stp_10.42.42.5(pid=21083): stderr: 
| [0;m[38;5;43m20221212195244164 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212195244164 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212195244164 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212195244164 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212195244165 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212195244165 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212195244165 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:52:46.107439 run              patchelf(pid=21086): Terminating (SIGINT)
19:52:46.281660 run              patchelf(pid=21086): Terminated: ok {rc=0}
19:52:46.314471 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21083): Process ended prematurely: osmo-stp_10.42.42.5(pid=21083) [trial-2381↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21083)]  [trial-2381↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
19:52:46.324353 tst      cs_paging_gprs_active.py:38: Test FAILED (8.6 sec)
19:52:46.387850 run   osmo-hlr_10.42.42.2(pid=21080): ERR: Terminated: ERROR {rc=237}  [trial-2381↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21080)]
19:52:46.438775 run   osmo-hlr_10.42.42.2(pid=21080): stdout: 
| (launched: 2022-12-12_19:52:42.972686) 
19:52:46.490594 run   osmo-hlr_10.42.42.2(pid=21080): stderr: 
| [0;m[1;31m20221212195243168 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221212195243168 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221212195243168 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221212195243168 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221212195243168 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221212195243168 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221212195243184 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221212195243195 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212195243195 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212195243195 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:52:46.534339 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21073): Terminating (SIGTERM)
19:52:46.576518 run iperf3-srv_10.42.42.10(pid=21074): Terminating (SIGTERM)
19:52:46.620227 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21075): Terminating (SIGTERM)
19:52:46.661896 run iperf3-srv_10.42.42.10(pid=21076): Terminating (SIGTERM)
19:52:46.704241 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21079): Terminating (SIGTERM)
19:52:46.746823 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21082): Terminating (SIGTERM)
19:52:46.793291 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21085): Terminating (SIGTERM)
19:52:46.803864 ---      ParallelTerminationStrategy: PID 21073 died...
19:52:46.860755 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21073): Terminated: ok {rc=0}
19:52:46.871746 ---      ParallelTerminationStrategy: PID 21074 died...
19:52:46.929118 run iperf3-srv_10.42.42.10(pid=21074): Terminated {rc=256}
19:52:46.940452 ---      ParallelTerminationStrategy: PID 21075 died...
19:52:46.996143 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21075): Terminated: ok {rc=0}
19:52:47.006135 ---      ParallelTerminationStrategy: PID 21076 died...
19:52:47.061044 run iperf3-srv_10.42.42.10(pid=21076): Terminated {rc=256}
19:52:47.071578 ---      ParallelTerminationStrategy: PID 21079 died...
19:52:47.126254 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21079): Terminated: ok {rc=0}
19:52:47.136298 ---      ParallelTerminationStrategy: PID 21082 died...
19:52:47.191849 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21082): Terminated: ok {rc=0}
19:52:47.201959 ---      ParallelTerminationStrategy: PID 21085 died...
19:52:47.255718 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21085): Terminated: ok {rc=0}
19:52:47.339173 bus                          /gobi_0: Setting Powered False
19:52:48.446564 bus                          /gobi_0: Setting Powered False
19:52:49.558223 bus                          /gobi_6: Setting Powered False
