Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping.py (from gprs_sysmo)

Failing for the past 54 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10483): Process ended prematurely: osmo-stp_10.42.42.5(pid=10483) [trial-2384↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10483)]

Standard Output

----------------------------------------------
trial-2384 gprs:sysmo ping.py
----------------------------------------------
00:16:27.855529 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
00:16:27.867163 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
00:16:28.000006 tst                          ping.py: using LAC 32304
00:16:28.125414 tst                          ping.py: using RAC 174
00:16:28.252173 tst                          ping.py: using CellId 32304
00:16:28.377237 tst                          ping.py: using BVCI 32305
00:16:28.401803 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
00:16:28.412667 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
00:16:28.423505 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
00:16:28.434575 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
00:16:28.445578 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
00:16:28.456440 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
00:16:28.467768 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
00:16:28.479533 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
00:16:28.769895 tst                       ping.py:19: start network...
00:16:28.902933 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:16:29.405588 run         create_hlr_db(pid=10477): Launched
00:16:29.590425 bus                          /gobi_6: Setting Powered False
00:16:30.611353 run         create_hlr_db(pid=10477): Terminated: ok {rc=0}
00:16:31.046077 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10479): Launched
00:16:31.448615 run   osmo-hlr_10.42.42.2(pid=10480): Launched
00:16:31.681477 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:16:32.322363 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10482): Launched
00:16:32.642401 run   osmo-stp_10.42.42.5(pid=10483): Launched
00:16:32.758909 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:16:33.315893 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10485): Launched
00:16:33.430442 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:16:33.710545 run              patchelf(pid=10486): Launched
00:16:33.898345 run   osmo-stp_10.42.42.5(pid=10483): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10483)]
00:16:34.035042 run   osmo-stp_10.42.42.5(pid=10483): stdout: 
| (launched: 2022-12-13_00:16:32.483692)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:16:34.172887 run   osmo-stp_10.42.42.5(pid=10483): stderr: 
| �[0;m�[38;5;43m20221213001632674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213001632675 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213001632675 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213001632675 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213001632676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213001632676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213001632676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:16:34.304873 run   osmo-stp_10.42.42.5(pid=10483): stdout: 
| (launched: 2022-12-13_00:16:32.483692)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:16:34.435717 run   osmo-stp_10.42.42.5(pid=10483): stderr: 
| �[0;m�[38;5;43m20221213001632674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213001632675 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213001632675 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213001632675 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213001632676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213001632676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213001632676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:16:34.588846 run              patchelf(pid=10486): Terminating (SIGINT)
00:16:34.769346 run              patchelf(pid=10486): Terminated: ok {rc=0}
00:16:34.801487 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10483): Process ended prematurely: osmo-stp_10.42.42.5(pid=10483) [trial-2384↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10483)]  [trial-2384↪gprs:sysmo↪ping.py:22]
00:16:34.811047 tst                       ping.py:22: Test FAILED (6.9 sec)
00:16:34.874335 run   osmo-hlr_10.42.42.2(pid=10480): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10480)]
00:16:34.926256 run   osmo-hlr_10.42.42.2(pid=10480): stdout: 
| (launched: 2022-12-13_00:16:31.198568) 
00:16:34.978823 run   osmo-hlr_10.42.42.2(pid=10480): stderr: 
| �[0;m�[1;31m20221213001631537 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213001631537 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213001631537 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213001631537 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213001631538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213001631538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213001631551 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213001631563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213001631563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213001631563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:16:35.023478 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10479): Terminating (SIGTERM)
00:16:35.065690 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10482): Terminating (SIGTERM)
00:16:35.107996 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10485): Terminating (SIGTERM)
00:16:35.118229 ---      ParallelTerminationStrategy: PID 10479 died...
00:16:35.174658 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10479): Terminated: ok {rc=0}
00:16:35.185113 ---      ParallelTerminationStrategy: PID 10482 died...
00:16:35.242070 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10482): Terminated: ok {rc=0}
00:16:35.252372 ---      ParallelTerminationStrategy: PID 10485 died...
00:16:35.308304 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10485): Terminated: ok {rc=0}
00:16:35.395530 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10483): Process ended prematurely: osmo-stp_10.42.42.5(pid=10483) [trial-2384↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10483)]