
----------------------------------------------
trial-2394 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py
----------------------------------------------
21:17:15.297057 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
21:17:15.308390 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
21:17:15.455069 tst                        iperf3.py: using LAC 36334
21:17:15.577698 tst                        iperf3.py: using RAC 124
21:17:15.699111 tst                        iperf3.py: using CellId 36334
21:17:15.820376 tst                        iperf3.py: using BVCI 36335
21:17:15.858826 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
21:17:15.872642 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
21:17:15.884555 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
21:17:15.902162 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
21:17:15.914496 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
21:17:15.927207 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
21:17:15.939709 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
21:17:15.951506 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
21:17:15.964695 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
21:17:16.349598 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
21:17:16.503035 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
21:17:16.845701 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1044): Launched
21:17:17.131037 run iperf3-srv_10.42.42.10(pid=1045): Launched
21:17:17.322653 tst                      iperf3.py:8: start network...
21:17:17.452411 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
21:17:17.937082 run          create_hlr_db(pid=1046): Launched
21:17:18.113453 bus                          /gobi_6: Setting Powered False
21:17:19.136003 run          create_hlr_db(pid=1046): Terminated: ok {rc=0}
21:17:19.545144 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1048): Launched
21:17:19.851749 run    osmo-hlr_10.42.42.2(pid=1049): Launched
21:17:19.970249 run              osmo-stp_10.42.42.5: Starting osmo-stp
21:17:20.510215 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1051): Launched
21:17:20.816922 run    osmo-stp_10.42.42.5(pid=1052): Launched
21:17:20.927421 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
21:17:21.460588 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1054): Launched
21:17:21.569679 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
21:17:21.836257 run               patchelf(pid=1055): Launched
21:17:22.015221 run    osmo-stp_10.42.42.5(pid=1052): ERR: Terminated: ERROR {rc=1}  [trial-2394↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1052)]
21:17:22.146281 run    osmo-stp_10.42.42.5(pid=1052): stdout: 
| (launched: 2022-12-13_21:17:20.666751)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:17:22.278060 run    osmo-stp_10.42.42.5(pid=1052): stderr: 
| [0;m[38;5;43m20221213211720835 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213211720835 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213211720836 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213211720836 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213211720837 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213211720837 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213211720837 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:17:22.405112 run    osmo-stp_10.42.42.5(pid=1052): stdout: 
| (launched: 2022-12-13_21:17:20.666751)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:17:22.530931 run    osmo-stp_10.42.42.5(pid=1052): stderr: 
| [0;m[38;5;43m20221213211720835 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213211720835 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213211720836 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213211720836 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213211720837 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213211720837 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213211720837 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:17:22.677818 run               patchelf(pid=1055): Terminating (SIGINT)
21:17:22.851201 run               patchelf(pid=1055): Terminated: ok {rc=0}
21:17:22.882809 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1052): Process ended prematurely: osmo-stp_10.42.42.5(pid=1052) [trial-2394↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1052)]  [trial-2394↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8]
21:17:22.892126 tst                      iperf3.py:8: Test FAILED (7.6 sec)
21:17:22.952897 run    osmo-hlr_10.42.42.2(pid=1049): ERR: Terminated: ERROR {rc=237}  [trial-2394↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1049)]
21:17:23.002370 run    osmo-hlr_10.42.42.2(pid=1049): stdout: 
| (launched: 2022-12-13_21:17:19.700906) 
21:17:23.052232 run    osmo-hlr_10.42.42.2(pid=1049): stderr: 
| [0;m[1;31m20221213211719876 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213211719876 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213211719877 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213211719877 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213211719877 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213211719877 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213211719893 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213211719904 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213211719904 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213211719904 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
21:17:23.094922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1044): Terminating (SIGTERM)
21:17:23.134826 run iperf3-srv_10.42.42.10(pid=1045): Terminating (SIGTERM)
21:17:23.174745 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1048): Terminating (SIGTERM)
21:17:23.214634 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1051): Terminating (SIGTERM)
21:17:23.254525 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1054): Terminating (SIGTERM)
21:17:23.263805 ---      ParallelTerminationStrategy: PID 1044 died...
21:17:23.317760 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1044): Terminated: ok {rc=0}
21:17:23.327433 ---      ParallelTerminationStrategy: PID 1045 died...
21:17:23.380920 run iperf3-srv_10.42.42.10(pid=1045): Terminated {rc=256}
21:17:23.390566 ---      ParallelTerminationStrategy: PID 1048 died...
21:17:23.444151 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1048): Terminated: ok {rc=0}
21:17:23.453863 ---      ParallelTerminationStrategy: PID 1051 died...
21:17:23.508208 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1051): Terminated: ok {rc=0}
21:17:23.517945 ---      ParallelTerminationStrategy: PID 1054 died...
21:17:23.571584 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1054): Terminated: ok {rc=0}
21:17:23.659732 bus                          /gobi_6: Setting Powered False
