
----------------------------------------------
trial-2396 gprs:nanobts+band-1900+mod-bts0-dynts-ipa ping_idle_ping.py
----------------------------------------------
00:17:35.227840 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:17:35.239939 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
00:17:35.394880 tst                ping_idle_ping.py: using LAC 37231
00:17:35.518217 tst                ping_idle_ping.py: using RAC 1
00:17:35.640640 tst                ping_idle_ping.py: using CellId 37231
00:17:35.760324 tst                ping_idle_ping.py: using BVCI 37232
00:17:35.782737 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:17:35.793877 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:17:35.804647 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:17:35.815406 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:17:35.826605 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:17:35.837815 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:17:35.849297 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:17:35.860766 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
00:17:36.149692 tst             ping_idle_ping.py:24: start network...
00:17:36.281297 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:17:36.775674 run         create_hlr_db(pid=18011): Launched
00:17:36.957990 bus                          /gobi_6: Setting Powered False
00:17:37.979664 run         create_hlr_db(pid=18011): Terminated: ok {rc=0}
00:17:38.373789 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18013): Launched
00:17:38.668015 run   osmo-hlr_10.42.42.2(pid=18014): Launched
00:17:38.783609 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:17:39.296191 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18016): Launched
00:17:39.589453 run   osmo-stp_10.42.42.5(pid=18017): Launched
00:17:39.695968 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:17:40.207814 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18019): Launched
00:17:40.312222 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:17:40.567917 run              patchelf(pid=18020): Launched
00:17:40.739382 run   osmo-stp_10.42.42.5(pid=18017): ERR: Terminated: ERROR {rc=1}  [trial-2396↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18017)]
00:17:40.865386 run   osmo-stp_10.42.42.5(pid=18017): stdout: 
| (launched: 2022-12-14_00:17:39.445378)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:17:40.991429 run   osmo-stp_10.42.42.5(pid=18017): stderr: 
| [0;m[38;5;43m20221214001739613 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214001739613 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214001739613 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214001739613 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214001739614 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214001739614 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214001739614 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:17:41.113170 run   osmo-stp_10.42.42.5(pid=18017): stdout: 
| (launched: 2022-12-14_00:17:39.445378)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:17:41.233687 run   osmo-stp_10.42.42.5(pid=18017): stderr: 
| [0;m[38;5;43m20221214001739613 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214001739613 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214001739613 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214001739613 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214001739614 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214001739614 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214001739614 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:17:41.374055 run              patchelf(pid=18020): Terminating (SIGINT)
00:17:41.538765 run              patchelf(pid=18020): Terminated: ok {rc=0}
00:17:41.568702 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=18017): Process ended prematurely: osmo-stp_10.42.42.5(pid=18017) [trial-2396↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18017)]  [trial-2396↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27]
00:17:41.577335 tst             ping_idle_ping.py:27: Test FAILED (6.3 sec)
00:17:41.636134 run   osmo-hlr_10.42.42.2(pid=18014): ERR: Terminated: ERROR {rc=237}  [trial-2396↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18014)]
00:17:41.684271 run   osmo-hlr_10.42.42.2(pid=18014): stdout: 
| (launched: 2022-12-14_00:17:38.522749) 
00:17:41.733076 run   osmo-hlr_10.42.42.2(pid=18014): stderr: 
| [0;m[1;31m20221214001738699 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214001738699 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214001738699 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214001738699 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214001738699 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214001738699 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214001738711 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214001738720 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214001738720 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214001738720 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:17:41.774617 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18013): Terminating (SIGTERM)
00:17:41.813960 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18016): Terminating (SIGTERM)
00:17:41.853334 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18019): Terminating (SIGTERM)
00:17:41.862451 ---      ParallelTerminationStrategy: PID 18013 died...
00:17:41.914780 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18013): Terminated: ok {rc=0}
00:17:41.924197 ---      ParallelTerminationStrategy: PID 18016 died...
00:17:41.976196 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18016): Terminated: ok {rc=0}
00:17:41.985664 ---      ParallelTerminationStrategy: PID 18019 died...
00:17:42.037630 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18019): Terminated: ok {rc=0}
00:17:42.120048 bus                          /gobi_6: Setting Powered False
