
----------------------------------------------
trial-2396 gprs:nanobts+band-1900+mod-bts0-egprs iperf3.py
----------------------------------------------
00:15:58.748315 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:58.760354 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
00:15:58.898408 tst                        iperf3.py: using LAC 37223
00:15:59.023906 tst                        iperf3.py: using RAC 248
00:15:59.148907 tst                        iperf3.py: using CellId 37223
00:15:59.276477 tst                        iperf3.py: using BVCI 37224
00:15:59.301318 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:59.312770 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:59.324075 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:59.335252 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:59.346728 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:59.358117 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:59.369747 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:59.381281 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:59.392738 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
00:15:59.681568 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
00:15:59.814466 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:16:00.142788 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17901): Launched
00:16:00.417495 run iperf3-srv_10.42.42.10(pid=17902): Launched
00:16:00.614302 tst                      iperf3.py:8: start network...
00:16:00.747770 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:16:01.303021 run         create_hlr_db(pid=17903): Launched
00:16:01.480335 bus                          /gobi_6: Setting Powered False
00:16:02.497790 run         create_hlr_db(pid=17903): Terminated: ok {rc=0}
00:16:02.895645 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17905): Launched
00:16:03.194587 run   osmo-hlr_10.42.42.2(pid=17906): Launched
00:16:03.306076 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:16:03.825803 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17908): Launched
00:16:04.124918 run   osmo-stp_10.42.42.5(pid=17909): Launched
00:16:04.234118 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:16:04.754883 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17911): Launched
00:16:04.862046 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:16:05.122969 run              patchelf(pid=17912): Launched
00:16:05.298959 run   osmo-stp_10.42.42.5(pid=17909): ERR: Terminated: ERROR {rc=1}  [trial-2396↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17909)]
00:16:05.427864 run   osmo-stp_10.42.42.5(pid=17909): stdout: 
| (launched: 2022-12-14_00:16:03.977792)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:16:05.557577 run   osmo-stp_10.42.42.5(pid=17909): stderr: 
| [0;m[38;5;43m20221214001604148 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214001604148 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214001604148 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214001604149 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214001604151 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214001604151 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214001604151 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:16:05.681498 run   osmo-stp_10.42.42.5(pid=17909): stdout: 
| (launched: 2022-12-14_00:16:03.977792)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:16:05.803899 run   osmo-stp_10.42.42.5(pid=17909): stderr: 
| [0;m[38;5;43m20221214001604148 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214001604148 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214001604148 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214001604149 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214001604151 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214001604151 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214001604151 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:16:05.947311 run              patchelf(pid=17912): Terminating (SIGINT)
00:16:06.115329 run              patchelf(pid=17912): Terminated: ok {rc=0}
00:16:06.146254 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=17909): Process ended prematurely: osmo-stp_10.42.42.5(pid=17909) [trial-2396↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17909)]  [trial-2396↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8]
00:16:06.155389 tst                      iperf3.py:8: Test FAILED (7.4 sec)
00:16:06.215540 run   osmo-hlr_10.42.42.2(pid=17906): ERR: Terminated: ERROR {rc=237}  [trial-2396↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17906)]
00:16:06.264731 run   osmo-hlr_10.42.42.2(pid=17906): stdout: 
| (launched: 2022-12-14_00:16:03.047600) 
00:16:06.314720 run   osmo-hlr_10.42.42.2(pid=17906): stderr: 
| [0;m[1;31m20221214001603224 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214001603224 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214001603224 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214001603224 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214001603224 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214001603224 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214001603237 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:nanobts+band-1900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214001603248 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214001603249 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214001603249 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:16:06.357107 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17901): Terminating (SIGTERM)
00:16:06.396736 run iperf3-srv_10.42.42.10(pid=17902): Terminating (SIGTERM)
00:16:06.436353 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17905): Terminating (SIGTERM)
00:16:06.476054 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17908): Terminating (SIGTERM)
00:16:06.515725 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17911): Terminating (SIGTERM)
00:16:06.525118 ---      ParallelTerminationStrategy: PID 17901 died...
00:16:06.578583 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17901): Terminated: ok {rc=0}
00:16:06.588133 ---      ParallelTerminationStrategy: PID 17902 died...
00:16:06.641226 run iperf3-srv_10.42.42.10(pid=17902): Terminated {rc=256}
00:16:06.650733 ---      ParallelTerminationStrategy: PID 17905 died...
00:16:06.703125 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17905): Terminated: ok {rc=0}
00:16:06.712647 ---      ParallelTerminationStrategy: PID 17908 died...
00:16:06.765106 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17908): Terminated: ok {rc=0}
00:16:06.774711 ---      ParallelTerminationStrategy: PID 17911 died...
00:16:06.827341 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17911): Terminated: ok {rc=0}
00:16:06.909876 bus                          /gobi_6: Setting Powered False
