
----------------------------------------------
trial-2396 gprs:nanobts+band-1900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
00:16:36.084235 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:36.095901 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
00:16:36.222984 tst                ping_idle_ping.py: using LAC 37226
00:16:36.337898 tst                ping_idle_ping.py: using RAC 251
00:16:36.453182 tst                ping_idle_ping.py: using CellId 37226
00:16:36.573378 tst                ping_idle_ping.py: using BVCI 37227
00:16:36.595751 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:36.606877 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:36.617749 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:36.628442 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:36.639157 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:36.650586 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:36.661858 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:36.672708 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
00:16:36.944124 tst             ping_idle_ping.py:24: start network...
00:16:37.066166 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:16:37.543438 run         create_hlr_db(pid=17941): Launched
00:16:37.713788 bus                          /gobi_6: Setting Powered False
00:16:38.736712 run         create_hlr_db(pid=17941): Terminated: ok {rc=0}
00:16:39.128685 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17943): Launched
00:16:39.422175 run   osmo-hlr_10.42.42.2(pid=17944): Launched
00:16:39.529159 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:16:40.045730 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17946): Launched
00:16:40.363217 run   osmo-stp_10.42.42.5(pid=17947): Launched
00:16:40.479158 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:16:41.029924 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17949): Launched
00:16:41.143020 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:16:41.418397 run              patchelf(pid=17950): Launched
00:16:41.603211 run   osmo-stp_10.42.42.5(pid=17947): ERR: Terminated: ERROR {rc=1}  [trial-2396↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17947)]
00:16:41.738643 run   osmo-stp_10.42.42.5(pid=17947): stdout: 
| (launched: 2022-12-14_00:16:40.207175)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:16:41.873963 run   osmo-stp_10.42.42.5(pid=17947): stderr: 
| [0;m[38;5;43m20221214001640398 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214001640399 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214001640399 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214001640399 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214001640402 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214001640402 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214001640402 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:16:42.004872 run   osmo-stp_10.42.42.5(pid=17947): stdout: 
| (launched: 2022-12-14_00:16:40.207175)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:16:42.134844 run   osmo-stp_10.42.42.5(pid=17947): stderr: 
| [0;m[38;5;43m20221214001640398 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214001640399 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214001640399 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214001640399 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214001640402 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214001640402 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214001640402 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:16:42.286427 run              patchelf(pid=17950): Terminating (SIGINT)
00:16:42.463498 run              patchelf(pid=17950): Terminated: ok {rc=0}
00:16:42.495606 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=17947): Process ended prematurely: osmo-stp_10.42.42.5(pid=17947) [trial-2396↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17947)]  [trial-2396↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27]
00:16:42.504784 tst             ping_idle_ping.py:27: Test FAILED (6.4 sec)
00:16:42.567236 run   osmo-hlr_10.42.42.2(pid=17944): ERR: Terminated: ERROR {rc=237}  [trial-2396↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17944)]
00:16:42.618635 run   osmo-hlr_10.42.42.2(pid=17944): stdout: 
| (launched: 2022-12-14_00:16:39.278053) 
00:16:42.670293 run   osmo-hlr_10.42.42.2(pid=17944): stderr: 
| [0;m[1;31m20221214001639453 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214001639453 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214001639453 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214001639453 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214001639453 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214001639453 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214001639466 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:nanobts+band-1900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214001639474 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214001639474 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214001639474 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:16:42.714157 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17943): Terminating (SIGTERM)
00:16:42.755436 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17946): Terminating (SIGTERM)
00:16:42.796879 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17949): Terminating (SIGTERM)
00:16:42.806490 ---      ParallelTerminationStrategy: PID 17943 died...
00:16:42.862282 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17943): Terminated: ok {rc=0}
00:16:42.872253 ---      ParallelTerminationStrategy: PID 17946 died...
00:16:42.928124 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17946): Terminated: ok {rc=0}
00:16:42.938103 ---      ParallelTerminationStrategy: PID 17949 died...
00:16:42.993954 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17949): Terminated: ok {rc=0}
00:16:43.080766 bus                          /gobi_6: Setting Powered False
