
----------------------------------------------
trial-2396 gprs:nanobts+band-900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
00:22:45.906897 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:22:45.925326 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
00:22:46.086372 tst                ping_idle_ping.py: using LAC 37259
00:22:46.214863 tst                ping_idle_ping.py: using RAC 29
00:22:46.336788 tst                ping_idle_ping.py: using CellId 37259
00:22:46.453860 tst                ping_idle_ping.py: using BVCI 37260
00:22:46.478914 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:22:46.491033 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:22:46.502886 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:22:46.514725 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:22:46.527293 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:22:46.539638 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:22:46.552044 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:22:46.564435 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
00:22:46.864735 tst             ping_idle_ping.py:24: start network...
00:22:47.002437 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:22:47.510414 run         create_hlr_db(pid=18378): Launched
00:22:47.695750 bus                          /gobi_6: Setting Powered False
00:22:48.716909 run         create_hlr_db(pid=18378): Terminated: ok {rc=0}
00:22:49.115362 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18380): Launched
00:22:49.412079 run   osmo-hlr_10.42.42.2(pid=18381): Launched
00:22:49.525788 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:22:50.040029 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18383): Launched
00:22:50.337184 run   osmo-stp_10.42.42.5(pid=18384): Launched
00:22:50.456027 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:22:50.981792 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18386): Launched
00:22:51.087311 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:22:51.345627 run              patchelf(pid=18387): Launched
00:22:51.519197 run   osmo-stp_10.42.42.5(pid=18384): ERR: Terminated: ERROR {rc=1}  [trial-2396↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18384)]
00:22:51.646142 run   osmo-stp_10.42.42.5(pid=18384): stdout: 
| (launched: 2022-12-14_00:22:50.190841)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:22:51.773666 run   osmo-stp_10.42.42.5(pid=18384): stderr: 
| [0;m[38;5;43m20221214002250361 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214002250361 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214002250361 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214002250361 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214002250362 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214002250362 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214002250362 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:22:51.896352 run   osmo-stp_10.42.42.5(pid=18384): stdout: 
| (launched: 2022-12-14_00:22:50.190841)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:22:52.018394 run   osmo-stp_10.42.42.5(pid=18384): stderr: 
| [0;m[38;5;43m20221214002250361 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214002250361 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214002250361 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214002250361 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214002250362 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214002250362 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214002250362 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:22:52.160393 run              patchelf(pid=18387): Terminating (SIGINT)
00:22:52.327247 run              patchelf(pid=18387): Terminated: ok {rc=0}
00:22:52.357800 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=18384): Process ended prematurely: osmo-stp_10.42.42.5(pid=18384) [trial-2396↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18384)]  [trial-2396↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27]
00:22:52.366237 tst             ping_idle_ping.py:27: Test FAILED (6.4 sec)
00:22:52.426255 run   osmo-hlr_10.42.42.2(pid=18381): ERR: Terminated: ERROR {rc=237}  [trial-2396↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18381)]
00:22:52.475278 run   osmo-hlr_10.42.42.2(pid=18381): stdout: 
| (launched: 2022-12-14_00:22:49.265998) 
00:22:52.525220 run   osmo-hlr_10.42.42.2(pid=18381): stderr: 
| [0;m[1;31m20221214002249443 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214002249443 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214002249443 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214002249443 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214002249443 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214002249443 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214002249456 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:nanobts+band-900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214002249467 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214002249467 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214002249467 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:22:52.567701 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18380): Terminating (SIGTERM)
00:22:52.607459 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18383): Terminating (SIGTERM)
00:22:52.647103 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18386): Terminating (SIGTERM)
00:22:52.656426 ---      ParallelTerminationStrategy: PID 18380 died...
00:22:52.709714 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18380): Terminated: ok {rc=0}
00:22:52.719485 ---      ParallelTerminationStrategy: PID 18383 died...
00:22:52.772709 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18383): Terminated: ok {rc=0}
00:22:52.782378 ---      ParallelTerminationStrategy: PID 18386 died...
00:22:52.835327 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18386): Terminated: ok {rc=0}
00:22:52.919515 bus                          /gobi_6: Setting Powered False
