
----------------------------------------------
trial-2396 gprs:nanobts+band-900 ping_idle_ping.py
----------------------------------------------
00:21:45.864159 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:45.886757 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
00:21:46.036790 tst                ping_idle_ping.py: using LAC 37254
00:21:46.163289 tst                ping_idle_ping.py: using RAC 24
00:21:46.313585 tst                ping_idle_ping.py: using CellId 37254
00:21:46.453371 tst                ping_idle_ping.py: using BVCI 37255
00:21:46.478760 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:46.490921 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:46.502981 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:46.515035 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:46.528187 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:46.541253 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:46.555278 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:46.567519 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
00:21:46.863895 tst             ping_idle_ping.py:24: start network...
00:21:47.000009 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:21:47.504295 run         create_hlr_db(pid=18309): Launched
00:21:47.688908 bus                          /gobi_6: Setting Powered False
00:21:48.711162 run         create_hlr_db(pid=18309): Terminated: ok {rc=0}
00:21:49.133414 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18311): Launched
00:21:49.451347 run   osmo-hlr_10.42.42.2(pid=18312): Launched
00:21:49.570346 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:21:50.120124 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18314): Launched
00:21:50.437317 run   osmo-stp_10.42.42.5(pid=18315): Launched
00:21:50.553264 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:21:51.105305 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18317): Launched
00:21:51.218371 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:21:51.493893 run              patchelf(pid=18318): Launched
00:21:51.678800 run   osmo-stp_10.42.42.5(pid=18315): ERR: Terminated: ERROR {rc=1}  [trial-2396↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18315)]
00:21:51.814243 run   osmo-stp_10.42.42.5(pid=18315): stdout: 
| (launched: 2022-12-14_00:21:50.281082)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:21:51.950502 run   osmo-stp_10.42.42.5(pid=18315): stderr: 
| [0;m[38;5;43m20221214002150474 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214002150474 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214002150474 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214002150475 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214002150475 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214002150475 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214002150475 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:21:52.081838 run   osmo-stp_10.42.42.5(pid=18315): stdout: 
| (launched: 2022-12-14_00:21:50.281082)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:21:52.211595 run   osmo-stp_10.42.42.5(pid=18315): stderr: 
| [0;m[38;5;43m20221214002150474 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214002150474 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214002150474 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214002150475 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214002150475 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214002150475 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214002150475 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:21:52.363271 run              patchelf(pid=18318): Terminating (SIGINT)
00:21:52.540686 run              patchelf(pid=18318): Terminated: ok {rc=0}
00:21:52.572839 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=18315): Process ended prematurely: osmo-stp_10.42.42.5(pid=18315) [trial-2396↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18315)]  [trial-2396↪gprs:nanobts+band-900↪ping_idle_ping.py:27]
00:21:52.581993 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
00:21:52.645422 run   osmo-hlr_10.42.42.2(pid=18312): ERR: Terminated: ERROR {rc=237}  [trial-2396↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18312)]
00:21:52.697287 run   osmo-hlr_10.42.42.2(pid=18312): stdout: 
| (launched: 2022-12-14_00:21:49.294819) 
00:21:52.749809 run   osmo-hlr_10.42.42.2(pid=18312): stderr: 
| [0;m[1;31m20221214002149494 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214002149494 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214002149494 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214002149494 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214002149494 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214002149494 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214002149507 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214002149515 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214002149515 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214002149515 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:21:52.794581 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18311): Terminating (SIGTERM)
00:21:52.837232 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18314): Terminating (SIGTERM)
00:21:52.879695 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18317): Terminating (SIGTERM)
00:21:52.889614 ---      ParallelTerminationStrategy: PID 18311 died...
00:21:52.946329 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18311): Terminated: ok {rc=0}
00:21:52.956647 ---      ParallelTerminationStrategy: PID 18314 died...
00:21:53.013067 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18314): Terminated: ok {rc=0}
00:21:53.023341 ---      ParallelTerminationStrategy: PID 18317 died...
00:21:53.079467 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18317): Terminated: ok {rc=0}
00:21:53.165894 bus                          /gobi_6: Setting Powered False
