
----------------------------------------------
trial-2396 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py
----------------------------------------------
00:10:39.801881 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:10:39.813459 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
00:10:39.972175 tst         cs_paging_gprs_active.py: using LAC 37194
00:10:40.092205 tst         cs_paging_gprs_active.py: using RAC 219
00:10:40.212874 tst         cs_paging_gprs_active.py: using CellId 37194
00:10:40.333014 tst         cs_paging_gprs_active.py: using BVCI 37195
00:10:40.356004 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:10:40.367201 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:10:40.378111 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:10:40.388932 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:10:40.399894 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:10:40.410846 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:10:40.421820 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:10:40.432578 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:10:40.443643 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
00:10:40.558954 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
00:10:40.855164 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
00:10:40.989907 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:10:41.324192 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17529): Launched
00:10:41.601094 run iperf3-srv_10.42.42.10(pid=17530): Launched
00:10:41.798706 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
00:10:41.933388 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:10:42.268570 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17531): Launched
00:10:42.545860 run iperf3-srv_10.42.42.10(pid=17532): Launched
00:10:42.743862 tst      cs_paging_gprs_active.py:38: start network...
00:10:42.879031 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:10:43.385462 run         create_hlr_db(pid=17533): Launched
00:10:43.571058 bus                          /gobi_6: Setting Powered False
00:10:44.592818 run         create_hlr_db(pid=17533): Terminated: ok {rc=0}
00:10:44.999549 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17535): Launched
00:10:45.302363 run   osmo-hlr_10.42.42.2(pid=17536): Launched
00:10:45.413970 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:10:45.978184 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17538): Launched
00:10:46.391611 run   osmo-stp_10.42.42.5(pid=17539): Launched
00:10:46.612573 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:10:47.296377 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17541): Launched
00:10:47.405571 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:10:47.676569 run              patchelf(pid=17542): Launched
00:10:47.853542 run   osmo-stp_10.42.42.5(pid=17539): ERR: Terminated: ERROR {rc=1}  [trial-2396↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17539)]
00:10:47.982594 run   osmo-stp_10.42.42.5(pid=17539): stdout: 
| (launched: 2022-12-14_00:10:46.149743)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:10:48.112376 run   osmo-stp_10.42.42.5(pid=17539): stderr: 
| [0;m[38;5;43m20221214001046488 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214001046488 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214001046490 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214001046490 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214001046494 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214001046494 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214001046494 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:10:48.236750 run   osmo-stp_10.42.42.5(pid=17539): stdout: 
| (launched: 2022-12-14_00:10:46.149743)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:10:48.360246 run   osmo-stp_10.42.42.5(pid=17539): stderr: 
| [0;m[38;5;43m20221214001046488 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214001046488 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214001046490 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214001046490 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214001046494 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214001046494 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214001046494 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:10:48.504881 run              patchelf(pid=17542): Terminating (SIGINT)
00:10:48.674890 run              patchelf(pid=17542): Terminated: ok {rc=0}
00:10:48.706339 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17539): Process ended prematurely: osmo-stp_10.42.42.5(pid=17539) [trial-2396↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17539)]  [trial-2396↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38]
00:10:48.715586 tst      cs_paging_gprs_active.py:38: Test FAILED (9.0 sec)
00:10:48.775255 run   osmo-hlr_10.42.42.2(pid=17536): ERR: Terminated: ERROR {rc=237}  [trial-2396↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17536)]
00:10:48.824332 run   osmo-hlr_10.42.42.2(pid=17536): stdout: 
| (launched: 2022-12-14_00:10:45.153637) 
00:10:48.873546 run   osmo-hlr_10.42.42.2(pid=17536): stderr: 
| [0;m[1;31m20221214001045332 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214001045332 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214001045332 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214001045332 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214001045332 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214001045332 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214001045348 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214001045358 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214001045358 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214001045358 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:10:48.915332 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17529): Terminating (SIGTERM)
00:10:48.954540 run iperf3-srv_10.42.42.10(pid=17530): Terminating (SIGTERM)
00:10:48.993768 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17531): Terminating (SIGTERM)
00:10:49.033708 run iperf3-srv_10.42.42.10(pid=17532): Terminating (SIGTERM)
00:10:49.072850 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17535): Terminating (SIGTERM)
00:10:49.112204 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17538): Terminating (SIGTERM)
00:10:49.151441 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17541): Terminating (SIGTERM)
00:10:49.160515 ---      ParallelTerminationStrategy: PID 17529 died...
00:10:49.213107 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17529): Terminated: ok {rc=0}
00:10:49.222499 ---      ParallelTerminationStrategy: PID 17530 died...
00:10:49.274691 run iperf3-srv_10.42.42.10(pid=17530): Terminated {rc=256}
00:10:49.284092 ---      ParallelTerminationStrategy: PID 17531 died...
00:10:49.336161 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17531): Terminated: ok {rc=0}
00:10:49.345647 ---      ParallelTerminationStrategy: PID 17532 died...
00:10:49.397854 run iperf3-srv_10.42.42.10(pid=17532): Terminated {rc=256}
00:10:49.407259 ---      ParallelTerminationStrategy: PID 17535 died...
00:10:49.459445 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17535): Terminated: ok {rc=0}
00:10:49.468849 ---      ParallelTerminationStrategy: PID 17538 died...
00:10:49.521101 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17538): Terminated: ok {rc=0}
00:10:49.530514 ---      ParallelTerminationStrategy: PID 17541 died...
00:10:49.582578 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17541): Terminated: ok {rc=0}
00:10:49.670589 bus                          /gobi_0: Setting Powered False
00:10:50.774044 bus                          /gobi_0: Setting Powered False
00:10:51.879709 bus                          /gobi_6: Setting Powered False
