
----------------------------------------------
trial-2396 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
23:55:00.589276 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:00.600386 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
23:55:00.734596 tst         cs_paging_gprs_active.py: using LAC 37110
23:55:00.850354 tst         cs_paging_gprs_active.py: using RAC 135
23:55:00.980700 tst         cs_paging_gprs_active.py: using CellId 37110
23:55:01.102179 tst         cs_paging_gprs_active.py: using BVCI 37111
23:55:01.125594 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:01.137374 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:01.148909 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:01.160682 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:01.172531 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:01.184325 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:01.195939 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:01.207558 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:55:01.219374 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
23:55:01.341267 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
23:55:01.649542 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
23:55:01.786975 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
23:55:02.147602 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15587): Launched
23:55:02.420611 run iperf3-srv_10.42.42.10(pid=15588): Launched
23:55:02.601926 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
23:55:02.726502 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
23:55:03.035213 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15589): Launched
23:55:03.291109 run iperf3-srv_10.42.42.10(pid=15590): Launched
23:55:03.472550 tst      cs_paging_gprs_active.py:38: start network...
23:55:03.596172 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:55:04.071415 run         create_hlr_db(pid=15591): Launched
23:55:04.242280 bus                          /gobi_6: Setting Powered False
23:55:05.264334 run         create_hlr_db(pid=15591): Terminated: ok {rc=0}
23:55:05.683988 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15593): Launched
23:55:05.981270 run   osmo-hlr_10.42.42.2(pid=15594): Launched
23:55:06.098681 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:55:06.619204 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15596): Launched
23:55:06.916056 run   osmo-stp_10.42.42.5(pid=15597): Launched
23:55:07.023853 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:55:07.542756 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15599): Launched
23:55:07.648770 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:55:07.907920 run              patchelf(pid=15600): Launched
23:55:08.081482 run   osmo-stp_10.42.42.5(pid=15597): ERR: Terminated: ERROR {rc=1}  [trial-2396↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15597)]
23:55:08.208687 run   osmo-stp_10.42.42.5(pid=15597): stdout: 
| (launched: 2022-12-13_23:55:06.770392)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:55:08.336095 run   osmo-stp_10.42.42.5(pid=15597): stderr: 
| [0;m[38;5;43m20221213235506943 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213235506943 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213235506944 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213235506944 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213235506944 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213235506944 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213235506945 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:55:08.458771 run   osmo-stp_10.42.42.5(pid=15597): stdout: 
| (launched: 2022-12-13_23:55:06.770392)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:55:08.580385 run   osmo-stp_10.42.42.5(pid=15597): stderr: 
| [0;m[38;5;43m20221213235506943 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213235506943 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213235506944 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213235506944 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213235506944 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213235506944 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213235506945 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:55:08.722119 run              patchelf(pid=15600): Terminating (SIGINT)
23:55:08.888551 run              patchelf(pid=15600): Terminated: ok {rc=0}
23:55:08.919176 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15597): Process ended prematurely: osmo-stp_10.42.42.5(pid=15597) [trial-2396↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15597)]  [trial-2396↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
23:55:08.928237 tst      cs_paging_gprs_active.py:38: Test FAILED (8.4 sec)
23:55:08.987928 run   osmo-hlr_10.42.42.2(pid=15594): ERR: Terminated: ERROR {rc=237}  [trial-2396↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15594)]
23:55:09.036771 run   osmo-hlr_10.42.42.2(pid=15594): stdout: 
| (launched: 2022-12-13_23:55:05.835606) 
23:55:09.086449 run   osmo-hlr_10.42.42.2(pid=15594): stderr: 
| [0;m[1;31m20221213235506010 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213235506010 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213235506010 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213235506010 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213235506010 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213235506010 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213235506022 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213235506032 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213235506032 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213235506032 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:55:09.128645 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15587): Terminating (SIGTERM)
23:55:09.168284 run iperf3-srv_10.42.42.10(pid=15588): Terminating (SIGTERM)
23:55:09.207964 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15589): Terminating (SIGTERM)
23:55:09.247437 run iperf3-srv_10.42.42.10(pid=15590): Terminating (SIGTERM)
23:55:09.287153 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15593): Terminating (SIGTERM)
23:55:09.327115 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15596): Terminating (SIGTERM)
23:55:09.366857 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15599): Terminating (SIGTERM)
23:55:09.375934 ---      ParallelTerminationStrategy: PID 15587 died...
23:55:09.428913 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15587): Terminated: ok {rc=0}
23:55:09.438389 ---      ParallelTerminationStrategy: PID 15588 died...
23:55:09.490699 run iperf3-srv_10.42.42.10(pid=15588): Terminated {rc=256}
23:55:09.499989 ---      ParallelTerminationStrategy: PID 15589 died...
23:55:09.552292 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15589): Terminated: ok {rc=0}
23:55:09.561703 ---      ParallelTerminationStrategy: PID 15590 died...
23:55:09.613860 run iperf3-srv_10.42.42.10(pid=15590): Terminated {rc=256}
23:55:09.623194 ---      ParallelTerminationStrategy: PID 15593 died...
23:55:09.675436 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15593): Terminated: ok {rc=0}
23:55:09.684804 ---      ParallelTerminationStrategy: PID 15596 died...
23:55:09.737184 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15596): Terminated: ok {rc=0}
23:55:09.746598 ---      ParallelTerminationStrategy: PID 15599 died...
23:55:09.798677 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15599): Terminated: ok {rc=0}
23:55:09.881398 bus                          /gobi_0: Setting Powered False
23:55:10.986617 bus                          /gobi_0: Setting Powered False
23:55:12.098128 bus                          /gobi_6: Setting Powered False
