// SPDX-License-Identifier: GPL-2.0-only /* * * Copyright 2012 Paul Mackerras, IBM Corp. */ #include #include #include #include #include #include #include #include #include #include #include #include /* SRR1 bits for machine check on POWER7 */ #define SRR1_MC_LDSTERR (1ul << (63-42)) #define SRR1_MC_IFETCH_SH (63-45) #define SRR1_MC_IFETCH_MASK 0x7 #define SRR1_MC_IFETCH_SLBPAR 2 /* SLB parity error */ #define SRR1_MC_IFETCH_SLBMULTI 3 /* SLB multi-hit */ #define SRR1_MC_IFETCH_SLBPARMULTI 4 /* SLB parity + multi-hit */ #define SRR1_MC_IFETCH_TLBMULTI 5 /* I-TLB multi-hit */ /* DSISR bits for machine check on POWER7 */ #define DSISR_MC_DERAT_MULTI 0x800 /* D-ERAT multi-hit */ #define DSISR_MC_TLB_MULTI 0x400 /* D-TLB multi-hit */ #define DSISR_MC_SLB_PARITY 0x100 /* SLB parity error */ #define DSISR_MC_SLB_MULTI 0x080 /* SLB multi-hit */ #define DSISR_MC_SLB_PARMULTI 0x040 /* SLB parity + multi-hit */ /* POWER7 SLB flush and reload */ static void reload_slb(struct kvm_vcpu *vcpu) { struct slb_shadow *slb; unsigned long i, n; /* First clear out SLB */ asm volatile("slbmte %0,%0; slbia" : : "r" (0)); /* Do they have an SLB shadow buffer registered? */ slb = vcpu->arch.slb_shadow.pinned_addr; if (!slb) return; /* Sanity check */ n = min_t(u32, be32_to_cpu(slb->persistent), SLB_MIN_SIZE); if ((void *) &slb->save_area[n] > vcpu->arch.slb_shadow.pinned_end) return; /* Load up the SLB from that */ for (i = 0; i < n; ++i) { unsigned long rb = be64_to_cpu(slb->save_area[i].esid); unsigned long rs = be64_to_cpu(slb->save_area[i].vsid); rb = (rb & ~0xFFFul) | i; /* insert entry number */ asm volatile("slbmte %0,%1" : : "r" (rs), "r" (rb)); } } /* * On POWER7, see if we can handle a machine check that occurred inside * the guest in real mode, without switching to the host partition. */ static void kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu) { unsigned long srr1 = vcpu->arch.shregs.msr; struct machine_check_event mce_evt; long handled = 1; if (srr1 & SRR1_MC_LDSTERR) { /* error on load/store */ unsigned long dsisr = vcpu->arch.shregs.dsisr; if (dsisr & (DSISR_MC_SLB_PARMULTI | DSISR_MC_SLB_MULTI | DSISR_MC_SLB_PARITY | DSISR_MC_DERAT_MULTI)) { /* flush and reload SLB; flushes D-ERAT too */ reload_slb(vcpu); dsisr &= ~(DSISR_MC_SLB_PARMULTI | DSISR_MC_SLB_MULTI | DSISR_MC_SLB_PARITY | DSISR_MC_DERAT_MULTI); } if (dsisr & DSISR_MC_TLB_MULTI) { tlbiel_all_lpid(vcpu->kvm->arch.radix); dsisr &= ~DSISR_MC_TLB_MULTI; } /* Any other errors we don't understand? */ if (dsisr & 0xffffffffUL) handled = 0; } switch ((srr1 >> SRR1_MC_IFETCH_SH) & SRR1_MC_IFETCH_MASK) { case 0: break; case SRR1_MC_IFETCH_SLBPAR: case SRR1_MC_IFETCH_SLBMULTI: case SRR1_MC_IFETCH_SLBPARMULTI: reload_slb(vcpu); break; case SRR1_MC_IFETCH_TLBMULTI: tlbiel_all_lpid(vcpu->kvm->arch.radix); break; default: handled = 0; } /* * Now get the event and stash it in the vcpu struct so it can * be handled by the primary thread in virtual mode. We can't * call machine_check_queue_event() here if we are running on * an offline secondary thread. */ if (get_mce_event(&mce_evt, MCE_EVENT_RELEASE)) { if (handled && mce_evt.version == MCE_V1) mce_evt.disposition = MCE_DISPOSITION_RECOVERED; } else { memset(&mce_evt, 0, sizeof(mce_evt)); } vcpu->arch.mce_evt = mce_evt; } void kvmppc_realmode_machine_check(struct kvm_vcpu *vcpu) { kvmppc_realmode_mc_power7(vcpu); } /* Check if dynamic split is in force and return subcore size accordingly. */ static inline int kvmppc_cur_subcore_size(void) { if (local_paca->kvm_hstate.kvm_split_mode) return local_paca->kvm_hstate.kvm_split_mode->subcore_size; return threads_per_subcore; } void kvmppc_subcore_enter_guest(void) { int thread_id, subcore_id; thread_id = cpu_thread_in_core(local_paca->paca_index); subcore_id = thread_id / kvmppc_cur_subcore_size(); local_paca->sibling_subcore_state->in_guest[subcore_id] = 1; } EXPORT_SYMBOL_GPL(kvmppc_subcore_enter_guest); void kvmppc_subcore_exit_guest(void) { int thread_id, subcore_id; thread_id = cpu_thread_in_core(local_paca->paca_index); subcore_id = thread_id / kvmppc_cur_subcore_size(); local_paca->sibling_subcore_state->in_guest[subcore_id] = 0; } EXPORT_SYMBOL_GPL(kvmppc_subcore_exit_guest); static bool kvmppc_tb_resync_required(void) { if (test_and_set_bit(CORE_TB_RESYNC_REQ_BIT, &local_paca->sibling_subcore_state->flags)) return false; return true; } static void kvmppc_tb_resync_done(void) { clear_bit(CORE_TB_RESYNC_REQ_BIT, &local_paca->sibling_subcore_state->flags); } /* * kvmppc_realmode_hmi_handler() is called only by primary thread during * guest exit path. * * There are multiple reasons why HMI could occur, one of them is * Timebase (TB) error. If this HMI is due to TB error, then TB would * have been in stopped state. The opal hmi handler Will fix it and * restore the TB value with host timebase value. For HMI caused due * to non-TB errors, opal hmi handler will not touch/restore TB register * and hence there won't be any change in TB value. * * Since we are not sure about the cause of this HMI, we can't be sure * about the content of TB register whether it holds guest or host timebase * value. Hence the idea is to resync the TB on every HMI, so that we * know about the exact state of the TB value. Resync TB call will * restore TB to host timebase. * * Things to consider: * - On TB error, HMI interrupt is reported on all the threads of the core * that has encountered TB error irrespective of split-core mode. * - The very first thread on the core that get chance to fix TB error * would rsync the TB with local chipTOD value. * - The resync TB is a core level action i.e. it will sync all the TBs * in that core independent of split-core mode. This means if we trigger * TB sync from a thread from one subcore, it would affect TB values of * sibling subcores of the same core. * * All threads need to co-ordinate before making opal hmi handler. * All threads will use sibling_subcore_state->in_guest[] (shared by all * threads in the core) in paca which holds information about whether * sibling subcores are in Guest mode or host mode. The in_guest[] array * is of size MAX_SUBCORE_PER_CORE=4, indexed using subcore id to set/unset * subcore status. Only primary threads from each subcore is responsible * to set/unset its designated array element while entering/exiting the * guset. * * After invoking opal hmi handler call, one of the thread (of entire core) * will need to resync the TB. Bit 63 from subcore state bitmap flags * (sibling_subcore_state->flags) will be used to co-ordinate between * primary threads to decide who takes up the responsibility. * * This is what we do: * - Primary thread from each subcore tries to set resync required bit[63] * of paca->sibling_subcore_state->flags. * - The first primary thread that is able to set the flag takes the * responsibility of TB resync. (Let us call it as thread leader) * - All other threads which are in host will call * wait_for_subcore_guest_exit() and wait for in_guest[0-3] from * paca->sibling_subcore_state to get cleared. * - All the primary thread will clear its subcore status from subcore * state in_guest[] array respectively. * - Once all primary threads clear in_guest[0-3], all of them will invoke * opal hmi handler. * - Now all threads will wait for TB resync to complete by invoking * wait_for_tb_resync() except the thread leader. * - Thread leader will do a TB resync by invoking opal_resync_timebase() * call and the it will clear the resync required bit. * - All other threads will now come out of resync wait loop and proceed * with individual execution. * - On return of this function, primary thread will signal all * secondary threads to proceed. * - All secondary threads will eventually call opal hmi handler on * their exit path. * * Returns 1 if the timebase offset should be applied, 0 if not. */ long kvmppc_realmode_hmi_handler(void) { bool resync_req; local_paca->hmi_irqs++; if (hmi_handle_debugtrig(NULL) >= 0) return 1; /* * By now primary thread has already completed guest->host * partition switch but haven't signaled secondaries yet. * All the secondary threads on this subcore is waiting * for primary thread to signal them to go ahead. * * For threads from subcore which isn't in guest, they all will * wait until all other subcores on this core exit the guest. * * Now set the resync required bit. If you are the first to * set this bit then kvmppc_tb_resync_required() function will * return true. For rest all other subcores * kvmppc_tb_resync_required() will return false. * * If resync_req == true, then this thread is responsible to * initiate TB resync after hmi handler has completed. * All other threads on this core will wait until this thread * clears the resync required bit flag. */ resync_req = kvmppc_tb_resync_required(); /* Reset the subcore status to indicate it has exited guest */ kvmppc_subcore_exit_guest(); /* * Wait for other subcores on this core to exit the guest. * All the primary threads and threads from subcore that are * not in guest will wait here until all subcores are out * of guest context. */ wait_for_subcore_guest_exit(); /* * At this point we are sure that primary threads from each * subcore on this core have completed guest->host partition * switch. Now it is safe to call HMI handler. */ if (ppc_md.hmi_exception_early) ppc_md.hmi_exception_early(NULL); /* * Check if this thread is responsible to resync TB. * All other threads will wait until this thread completes the * TB resync. */ if (resync_req) { opal_resync_timebase(); /* Reset TB resync req bit */ kvmppc_tb_resync_done(); } else { wait_for_tb_resync(); } /* * Reset tb_offset_applied so the guest exit code won't try * to subtract the previous timebase offset from the timebase. */ if (local_paca->kvm_hstate.kvm_vcore) local_paca->kvm_hstate.kvm_vcore->tb_offset_applied = 0; return 0; }