Stack Trace
osmo-stp_10.42.42.5(pid=25451): Process ended prematurely: osmo-stp_10.42.42.5(pid=25451) [trial-2382↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25451)]Standard Output
----------------------------------------------
trial-2382 gprs:sysmo ping.py
----------------------------------------------
20:43:13.086176 tst gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:43:13.098076 tst gprs:sysmo: Using 1 x bts (candidates: 1)
20:43:13.233234 tst ping.py: using LAC 31382
20:43:13.367146 tst ping.py: using RAC 17
20:43:13.498857 tst ping.py: using CellId 31382
20:43:13.630924 tst ping.py: using BVCI 31383
20:43:13.656796 tst gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:43:13.668067 tst gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:43:13.679129 tst gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:43:13.690207 tst gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:43:13.701126 tst gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:43:13.712015 tst gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:43:13.723123 tst gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:43:13.734247 tst gprs:sysmo: Using 1 x modem (candidates: 4)
20:43:14.038451 tst ping.py:19: start network...
20:43:14.178802 run osmo-hlr_10.42.42.2: Starting osmo-hlr
20:43:14.716872 run create_hlr_db(pid=25445): Launched
20:43:14.911544 bus /gobi_6: Setting Powered False
20:43:15.963294 run create_hlr_db(pid=25445): Terminated: ok {rc=0}
20:43:16.426799 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25447): Launched
20:43:16.913611 run osmo-hlr_10.42.42.2(pid=25448): Launched
20:43:17.189194 run osmo-stp_10.42.42.5: Starting osmo-stp
20:43:17.749618 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25450): Launched
20:43:18.064762 run osmo-stp_10.42.42.5(pid=25451): Launched
20:43:18.178759 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:43:18.723377 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25453): Launched
20:43:18.834908 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:43:19.109108 run patchelf(pid=25454): Launched
20:43:19.291943 run osmo-stp_10.42.42.5(pid=25451): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25451)]
20:43:19.425766 run osmo-stp_10.42.42.5(pid=25451): stdout:
| (launched: 2022-12-12_20:43:17.908737)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Free Software lives by contribution. If you use this, please contribute!
|
20:43:19.559647 run osmo-stp_10.42.42.5(pid=25451): stderr:
| �[0;m�[38;5;43m20221212204318084 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212204318084 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212204318084 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212204318085 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212204318085 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212204318085 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212204318085 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use
20:43:19.689259 run osmo-stp_10.42.42.5(pid=25451): stdout:
| (launched: 2022-12-12_20:43:17.908737)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Free Software lives by contribution. If you use this, please contribute!
|
20:43:19.817698 run osmo-stp_10.42.42.5(pid=25451): stderr:
| �[0;m�[38;5;43m20221212204318084 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212204318084 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212204318084 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212204318085 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212204318085 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212204318085 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212204318085 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use
20:43:19.966520 run patchelf(pid=25454): Terminating (SIGINT)
20:43:20.142323 run patchelf(pid=25454): Terminated: ok {rc=0}
20:43:20.173994 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=25451): Process ended prematurely: osmo-stp_10.42.42.5(pid=25451) [trial-2382↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25451)] [trial-2382↪gprs:sysmo↪ping.py:22]
20:43:20.182547 tst ping.py:22: Test FAILED (7.1 sec)
20:43:20.245323 run osmo-hlr_10.42.42.2(pid=25448): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25448)]
20:43:20.298659 run osmo-hlr_10.42.42.2(pid=25448): stdout:
| (launched: 2022-12-12_20:43:16.595391)
20:43:20.353270 run osmo-hlr_10.42.42.2(pid=25448): stderr:
| �[0;m�[1;31m20221212204316827 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212204316827 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212204316827 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212204316827 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212204316827 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212204316828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212204316842 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212204316865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212204316865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212204316866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99)
20:43:20.396625 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25447): Terminating (SIGTERM)
20:43:20.447655 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25450): Terminating (SIGTERM)
20:43:20.492086 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25453): Terminating (SIGTERM)
20:43:20.502607 --- ParallelTerminationStrategy: PID 25447 died...
20:43:20.558441 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25447): Terminated: ok {rc=0}
20:43:20.569180 --- ParallelTerminationStrategy: PID 25450 died...
20:43:20.624438 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25450): Terminated: ok {rc=0}
20:43:20.635057 --- ParallelTerminationStrategy: PID 25453 died...
20:43:20.690586 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25453): Terminated: ok {rc=0}
20:43:20.783197 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last):
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
self.path)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
spec.loader.exec_module( importlib.util.module_from_spec(spec) )
File "<frozen importlib._bootstrap_external>", line 728, in exec_module
File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
ggsn.start()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
proc.launch_sync()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
raise e
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
self.wait()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
MainLoop.wait(self.terminated, timeout=timeout)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
self.poll(may_block=True)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
self.deferred_handling.handle_queue()
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
handler(*args, **kwargs)
File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25451): Process ended prematurely: osmo-stp_10.42.42.5(pid=25451) [trial-2382↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25451)]