Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10353): Process ended prematurely: osmo-stp_10.42.42.5(pid=10353) [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10353)]
Standard Output
---------------------------------------------- trial-2349 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:21:17.993480 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:18.004380 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:21:18.150601 tst cs_paging_gprs_active.py: using LAC 16570 20:21:18.276546 tst cs_paging_gprs_active.py: using RAC 250 20:21:18.403276 tst cs_paging_gprs_active.py: using CellId 16570 20:21:18.529750 tst cs_paging_gprs_active.py: using BVCI 16571 20:21:18.554963 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:18.566408 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:18.577679 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:18.589013 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:18.599930 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:18.611188 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:18.622381 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:18.633475 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:18.644645 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:21:18.762793 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:21:19.044288 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:21:19.171077 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:21:19.487869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10343): Launched 20:21:19.752869 run iperf3-srv_10.42.42.10(pid=10344): Launched 20:21:19.939093 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:21:20.066272 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:21:20.383531 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10345): Launched 20:21:20.646722 run iperf3-srv_10.42.42.10(pid=10346): Launched 20:21:20.832732 tst cs_paging_gprs_active.py:38: start network... 20:21:20.959984 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:21:21.443401 run create_hlr_db(pid=10347): Launched 20:21:21.618125 bus /gobi_6: Setting Powered False 20:21:22.641338 run create_hlr_db(pid=10347): Terminated: ok {rc=0} 20:21:23.076870 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10349): Launched 20:21:23.405202 run osmo-hlr_10.42.42.2(pid=10350): Launched 20:21:23.522529 run osmo-stp_10.42.42.5: Starting osmo-stp 20:21:24.093973 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10352): Launched 20:21:24.421570 run osmo-stp_10.42.42.5(pid=10353): Launched 20:21:24.540130 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:21:25.112002 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10355): Launched 20:21:25.228789 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:21:25.513606 run patchelf(pid=10356): Launched 20:21:25.704773 run osmo-stp_10.42.42.5(pid=10353): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10353)] 20:21:25.844162 run osmo-stp_10.42.42.5(pid=10353): stdout: | (launched: 2022-12-08_20:21:24.260934) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:21:25.984272 run osmo-stp_10.42.42.5(pid=10353): stderr: | �[0;m�[38;5;43m20221208202124451 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202124451 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202124452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202124452 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202124453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202124453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202124453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:21:26.119619 run osmo-stp_10.42.42.5(pid=10353): stdout: | (launched: 2022-12-08_20:21:24.260934) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:21:26.253898 run osmo-stp_10.42.42.5(pid=10353): stderr: | �[0;m�[38;5;43m20221208202124451 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202124451 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202124452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202124452 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202124453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202124453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202124453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:21:26.410148 run patchelf(pid=10356): Terminating (SIGINT) 20:21:26.592580 run patchelf(pid=10356): Terminated: ok {rc=0} 20:21:26.626159 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10353): Process ended prematurely: osmo-stp_10.42.42.5(pid=10353) [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10353)] [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:21:26.636029 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 20:21:26.698943 run osmo-hlr_10.42.42.2(pid=10350): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10350)] 20:21:26.750434 run osmo-hlr_10.42.42.2(pid=10350): stdout: | (launched: 2022-12-08_20:21:23.243663) 20:21:26.802800 run osmo-hlr_10.42.42.2(pid=10350): stderr: | �[0;m�[1;31m20221208202123440 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208202123441 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208202123441 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208202123441 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208202123441 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208202123441 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208202123453 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208202123462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208202123462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208202123462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:21:26.847539 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10343): Terminating (SIGTERM) 20:21:26.889615 run iperf3-srv_10.42.42.10(pid=10344): Terminating (SIGTERM) 20:21:26.931985 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10345): Terminating (SIGTERM) 20:21:26.974409 run iperf3-srv_10.42.42.10(pid=10346): Terminating (SIGTERM) 20:21:27.017239 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10349): Terminating (SIGTERM) 20:21:27.059669 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10352): Terminating (SIGTERM) 20:21:27.102064 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10355): Terminating (SIGTERM) 20:21:27.111761 --- ParallelTerminationStrategy: PID 10343 died... 20:21:27.168077 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10343): Terminated: ok {rc=0} 20:21:27.178262 --- ParallelTerminationStrategy: PID 10344 died... 20:21:27.233928 run iperf3-srv_10.42.42.10(pid=10344): Terminated {rc=256} 20:21:27.243942 --- ParallelTerminationStrategy: PID 10345 died... 20:21:27.299645 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10345): Terminated: ok {rc=0} 20:21:27.309774 --- ParallelTerminationStrategy: PID 10346 died... 20:21:27.365587 run iperf3-srv_10.42.42.10(pid=10346): Terminated {rc=256} 20:21:27.375622 --- ParallelTerminationStrategy: PID 10349 died... 20:21:27.431322 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10349): Terminated: ok {rc=0} 20:21:27.441487 --- ParallelTerminationStrategy: PID 10352 died... 20:21:27.497040 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10352): Terminated: ok {rc=0} 20:21:27.507194 --- ParallelTerminationStrategy: PID 10355 died... 20:21:27.562918 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10355): Terminated: ok {rc=0} 20:21:27.650840 bus /gobi_0: Setting Powered False 20:21:28.758249 bus /gobi_0: Setting Powered False 20:21:29.866875 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10353): Process ended prematurely: osmo-stp_10.42.42.5(pid=10353) [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10353)]