Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9788): Process ended prematurely: osmo-stp_10.42.42.5(pid=9788) [trial-2349↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9788)]
Standard Output
---------------------------------------------- trial-2349 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:13:26.301743 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:26.312531 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:13:26.459042 tst cs_paging_gprs_active.py: using LAC 16528 20:13:26.580257 tst cs_paging_gprs_active.py: using RAC 208 20:13:26.703843 tst cs_paging_gprs_active.py: using CellId 16528 20:13:26.827607 tst cs_paging_gprs_active.py: using BVCI 16529 20:13:26.851396 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:26.862459 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:26.873187 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:26.884215 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:26.895255 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:26.906293 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:26.917387 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:26.928238 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:26.939492 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:13:27.063435 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:13:27.367332 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:13:27.506582 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:13:27.853519 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9778): Launched 20:13:28.140885 run iperf3-srv_10.42.42.10(pid=9779): Launched 20:13:28.345756 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:13:28.484934 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:13:28.830568 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9780): Launched 20:13:29.116596 run iperf3-srv_10.42.42.10(pid=9781): Launched 20:13:29.320340 tst cs_paging_gprs_active.py:38: start network... 20:13:29.458231 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:13:29.989464 run create_hlr_db(pid=9782): Launched 20:13:30.181570 bus /gobi_6: Setting Powered False 20:13:31.203391 run create_hlr_db(pid=9782): Terminated: ok {rc=0} 20:13:31.663443 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9784): Launched 20:13:32.104405 run osmo-hlr_10.42.42.2(pid=9785): Launched 20:13:32.227749 run osmo-stp_10.42.42.5: Starting osmo-stp 20:13:32.810460 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9787): Launched 20:13:33.144466 run osmo-stp_10.42.42.5(pid=9788): Launched 20:13:33.265291 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:13:33.847431 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9790): Launched 20:13:33.965708 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:13:34.258118 run patchelf(pid=9791): Launched 20:13:34.451908 run osmo-stp_10.42.42.5(pid=9788): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9788)] 20:13:34.593199 run osmo-stp_10.42.42.5(pid=9788): stdout: | (launched: 2022-12-08_20:13:32.979674) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:13:34.735165 run osmo-stp_10.42.42.5(pid=9788): stderr: | �[0;m�[38;5;43m20221208201333177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208201333177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208201333178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208201333178 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208201333178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208201333179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208201333179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:13:34.872485 run osmo-stp_10.42.42.5(pid=9788): stdout: | (launched: 2022-12-08_20:13:32.979674) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:13:35.008502 run osmo-stp_10.42.42.5(pid=9788): stderr: | �[0;m�[38;5;43m20221208201333177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208201333177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208201333178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208201333178 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208201333178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208201333179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208201333179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:13:35.167366 run patchelf(pid=9791): Terminating (SIGINT) 20:13:35.353942 run patchelf(pid=9791): Terminated: ok {rc=0} 20:13:35.387921 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9788): Process ended prematurely: osmo-stp_10.42.42.5(pid=9788) [trial-2349↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9788)] [trial-2349↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:13:35.397860 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 20:13:35.461285 run osmo-hlr_10.42.42.2(pid=9785): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9785)] 20:13:35.513187 run osmo-hlr_10.42.42.2(pid=9785): stdout: | (launched: 2022-12-08_20:13:31.835418) 20:13:35.565779 run osmo-hlr_10.42.42.2(pid=9785): stderr: | �[0;m�[1;31m20221208201332133 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208201332133 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208201332133 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208201332133 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208201332133 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208201332133 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208201332146 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208201332155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208201332155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208201332155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:13:35.610519 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9778): Terminating (SIGTERM) 20:13:35.652510 run iperf3-srv_10.42.42.10(pid=9779): Terminating (SIGTERM) 20:13:35.694789 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9780): Terminating (SIGTERM) 20:13:35.738575 run iperf3-srv_10.42.42.10(pid=9781): Terminating (SIGTERM) 20:13:35.780638 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9784): Terminating (SIGTERM) 20:13:35.822620 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9787): Terminating (SIGTERM) 20:13:35.864669 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9790): Terminating (SIGTERM) 20:13:35.874408 --- ParallelTerminationStrategy: PID 9778 died... 20:13:35.930456 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9778): Terminated: ok {rc=0} 20:13:35.940543 --- ParallelTerminationStrategy: PID 9779 died... 20:13:35.996726 run iperf3-srv_10.42.42.10(pid=9779): Terminated {rc=256} 20:13:36.006717 --- ParallelTerminationStrategy: PID 9780 died... 20:13:36.062409 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9780): Terminated: ok {rc=0} 20:13:36.072479 --- ParallelTerminationStrategy: PID 9781 died... 20:13:36.128641 run iperf3-srv_10.42.42.10(pid=9781): Terminated {rc=256} 20:13:36.138780 --- ParallelTerminationStrategy: PID 9784 died... 20:13:36.194546 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9784): Terminated: ok {rc=0} 20:13:36.204591 --- ParallelTerminationStrategy: PID 9787 died... 20:13:36.260131 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9787): Terminated: ok {rc=0} 20:13:36.270165 --- ParallelTerminationStrategy: PID 9790 died... 20:13:36.325915 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9790): Terminated: ok {rc=0} 20:13:36.413249 bus /gobi_0: Setting Powered False 20:13:37.519067 bus /gobi_0: Setting Powered False 20:13:38.627919 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9788): Process ended prematurely: osmo-stp_10.42.42.5(pid=9788) [trial-2349↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9788)]