Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=11185): Process ended prematurely: osmo-stp_10.42.42.5(pid=11185) [trial-2349↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11185)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 20:28:55.547669 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:28:55.558553 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 20:28:55.715119 tst cs_paging_gprs_active.py: using LAC 16611 20:28:55.837087 tst cs_paging_gprs_active.py: using RAC 36 20:28:55.957882 tst cs_paging_gprs_active.py: using CellId 16611 20:28:56.077617 tst cs_paging_gprs_active.py: using BVCI 16612 20:28:56.100760 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:28:56.111697 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:28:56.122565 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:28:56.133613 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:28:56.144376 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:28:56.155334 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:28:56.166373 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:28:56.177264 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:28:56.188353 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:28:56.310655 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:28:56.613017 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:28:56.750571 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:28:57.090757 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11175): Launched 20:28:57.374430 run iperf3-srv_10.42.42.10(pid=11176): Launched 20:28:57.575734 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:28:57.713147 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:28:58.054114 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11177): Launched 20:28:58.336735 run iperf3-srv_10.42.42.10(pid=11178): Launched 20:28:58.537571 tst cs_paging_gprs_active.py:38: start network... 20:28:58.675243 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:28:59.201544 run create_hlr_db(pid=11179): Launched 20:28:59.390969 bus /gobi_6: Setting Powered False 20:29:00.412472 run create_hlr_db(pid=11179): Terminated: ok {rc=0} 20:29:00.824544 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11181): Launched 20:29:01.200523 run osmo-hlr_10.42.42.2(pid=11182): Launched 20:29:01.356303 run osmo-stp_10.42.42.5: Starting osmo-stp 20:29:02.121211 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11184): Launched 20:29:02.520067 run osmo-stp_10.42.42.5(pid=11185): Launched 20:29:02.657248 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:29:03.235239 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11187): Launched 20:29:03.352422 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:29:03.639385 run patchelf(pid=11188): Launched 20:29:03.831398 run osmo-stp_10.42.42.5(pid=11185): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11185)] 20:29:03.971630 run osmo-stp_10.42.42.5(pid=11185): stdout: | (launched: 2022-12-08_20:29:02.293123) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:29:04.112369 run osmo-stp_10.42.42.5(pid=11185): stderr: | �[0;m�[38;5;43m20221208202902641 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202902641 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202902641 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202902642 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202902642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202902642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202902642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:29:04.248425 run osmo-stp_10.42.42.5(pid=11185): stdout: | (launched: 2022-12-08_20:29:02.293123) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:29:04.383531 run osmo-stp_10.42.42.5(pid=11185): stderr: | �[0;m�[38;5;43m20221208202902641 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202902641 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202902641 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202902642 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202902642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202902642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202902642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:29:04.540673 run patchelf(pid=11188): Terminating (SIGINT) 20:29:04.725857 run patchelf(pid=11188): Terminated: ok {rc=0} 20:29:04.759785 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11185): Process ended prematurely: osmo-stp_10.42.42.5(pid=11185) [trial-2349↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11185)] [trial-2349↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 20:29:04.769654 tst cs_paging_gprs_active.py:38: Test FAILED (9.3 sec) 20:29:04.832685 run osmo-hlr_10.42.42.2(pid=11182): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11182)] 20:29:04.884485 run osmo-hlr_10.42.42.2(pid=11182): stdout: | (launched: 2022-12-08_20:29:01.007911) 20:29:04.936841 run osmo-hlr_10.42.42.2(pid=11182): stderr: | �[0;m�[1;31m20221208202901398 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208202901398 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208202901398 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208202901398 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208202901398 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208202901398 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208202901417 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208202901428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208202901428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208202901428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:29:04.981769 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11175): Terminating (SIGTERM) 20:29:05.023903 run iperf3-srv_10.42.42.10(pid=11176): Terminating (SIGTERM) 20:29:05.065943 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11177): Terminating (SIGTERM) 20:29:05.107944 run iperf3-srv_10.42.42.10(pid=11178): Terminating (SIGTERM) 20:29:05.149911 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11181): Terminating (SIGTERM) 20:29:05.191982 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11184): Terminating (SIGTERM) 20:29:05.234136 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11187): Terminating (SIGTERM) 20:29:05.243365 --- ParallelTerminationStrategy: PID 11175 died... 20:29:05.299356 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11175): Terminated: ok {rc=0} 20:29:05.309475 --- ParallelTerminationStrategy: PID 11176 died... 20:29:05.365128 run iperf3-srv_10.42.42.10(pid=11176): Terminated {rc=256} 20:29:05.375161 --- ParallelTerminationStrategy: PID 11177 died... 20:29:05.430916 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11177): Terminated: ok {rc=0} 20:29:05.440858 --- ParallelTerminationStrategy: PID 11178 died... 20:29:05.497025 run iperf3-srv_10.42.42.10(pid=11178): Terminated {rc=256} 20:29:05.507052 --- ParallelTerminationStrategy: PID 11181 died... 20:29:05.562818 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11181): Terminated: ok {rc=0} 20:29:05.572813 --- ParallelTerminationStrategy: PID 11184 died... 20:29:05.629038 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11184): Terminated: ok {rc=0} 20:29:05.639074 --- ParallelTerminationStrategy: PID 11187 died... 20:29:05.695080 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11187): Terminated: ok {rc=0} 20:29:05.782867 bus /gobi_0: Setting Powered False 20:29:06.888347 bus /gobi_0: Setting Powered False 20:29:07.995941 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11185): Process ended prematurely: osmo-stp_10.42.42.5(pid=11185) [trial-2349↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11185)]