Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11262): Process ended prematurely: osmo-stp_10.42.42.5(pid=11262) [trial-2349↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11262)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:29:55.398909 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:29:55.410174 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:29:55.573155 tst cs_paging_gprs_active.py: using LAC 16616 20:29:55.700161 tst cs_paging_gprs_active.py: using RAC 41 20:29:55.826540 tst cs_paging_gprs_active.py: using CellId 16616 20:29:55.953420 tst cs_paging_gprs_active.py: using BVCI 16617 20:29:55.977875 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:29:55.989188 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:29:56.000206 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:29:56.011305 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:29:56.022761 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:29:56.033898 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:29:56.045102 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:29:56.056035 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:29:56.067293 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:29:56.182226 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:29:56.474193 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:29:56.607561 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:29:56.938405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11249): Launched 20:29:57.213679 run iperf3-srv_10.42.42.10(pid=11250): Launched 20:29:57.409510 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:29:57.542659 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:29:57.872810 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11251): Launched 20:29:58.147651 run iperf3-srv_10.42.42.10(pid=11252): Launched 20:29:58.343019 tst cs_paging_gprs_active.py:38: start network... 20:29:58.476249 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:29:58.986761 run create_hlr_db(pid=11253): Launched 20:29:59.171898 bus /gobi_6: Setting Powered False 20:30:00.193592 run create_hlr_db(pid=11253): Terminated: ok {rc=0} 20:30:00.593924 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11255): Launched 20:30:00.896812 run osmo-hlr_10.42.42.2(pid=11256): Launched 20:30:01.104443 run osmo-stp_10.42.42.5: Starting osmo-stp 20:30:01.731327 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11261): Launched 20:30:02.178502 run osmo-stp_10.42.42.5(pid=11262): Launched 20:30:02.364367 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:30:02.921497 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11264): Launched 20:30:03.035703 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:30:03.315026 run patchelf(pid=11265): Launched 20:30:03.502183 run osmo-stp_10.42.42.5(pid=11262): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11262)] 20:30:03.639693 run osmo-stp_10.42.42.5(pid=11262): stdout: | (launched: 2022-12-08_20:30:01.917745) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:30:03.776927 run osmo-stp_10.42.42.5(pid=11262): stderr: | �[0;m�[38;5;43m20221208203002200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208203002200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208203002200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208203002201 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208203002201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208203002202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208203002202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:30:03.909497 run osmo-stp_10.42.42.5(pid=11262): stdout: | (launched: 2022-12-08_20:30:01.917745) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:30:04.040859 run osmo-stp_10.42.42.5(pid=11262): stderr: | �[0;m�[38;5;43m20221208203002200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208203002200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208203002200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208203002201 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208203002201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208203002202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208203002202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:30:04.194078 run patchelf(pid=11265): Terminating (SIGINT) 20:30:04.373472 run patchelf(pid=11265): Terminated: ok {rc=0} 20:30:04.406310 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11262): Process ended prematurely: osmo-stp_10.42.42.5(pid=11262) [trial-2349↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11262)] [trial-2349↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:30:04.416047 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 20:30:04.478665 run osmo-hlr_10.42.42.2(pid=11256): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11256)] 20:30:04.529892 run osmo-hlr_10.42.42.2(pid=11256): stdout: | (launched: 2022-12-08_20:30:00.744907) 20:30:04.581687 run osmo-hlr_10.42.42.2(pid=11256): stderr: | �[0;m�[1;31m20221208203001029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208203001029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208203001029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208203001029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208203001030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208203001030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208203001058 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208203001067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208203001067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208203001068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:30:04.626455 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11249): Terminating (SIGTERM) 20:30:04.668195 run iperf3-srv_10.42.42.10(pid=11250): Terminating (SIGTERM) 20:30:04.710432 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11251): Terminating (SIGTERM) 20:30:04.752102 run iperf3-srv_10.42.42.10(pid=11252): Terminating (SIGTERM) 20:30:04.793845 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11255): Terminating (SIGTERM) 20:30:04.835317 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11261): Terminating (SIGTERM) 20:30:04.877262 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11264): Terminating (SIGTERM) 20:30:04.886875 --- ParallelTerminationStrategy: PID 11249 died... 20:30:04.942476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11249): Terminated: ok {rc=0} 20:30:04.952539 --- ParallelTerminationStrategy: PID 11250 died... 20:30:05.007808 run iperf3-srv_10.42.42.10(pid=11250): Terminated {rc=256} 20:30:05.017869 --- ParallelTerminationStrategy: PID 11251 died... 20:30:05.073655 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11251): Terminated: ok {rc=0} 20:30:05.083565 --- ParallelTerminationStrategy: PID 11252 died... 20:30:05.139769 run iperf3-srv_10.42.42.10(pid=11252): Terminated {rc=256} 20:30:05.149717 --- ParallelTerminationStrategy: PID 11255 died... 20:30:05.205136 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11255): Terminated: ok {rc=0} 20:30:05.215179 --- ParallelTerminationStrategy: PID 11261 died... 20:30:05.270763 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11261): Terminated: ok {rc=0} 20:30:05.280655 --- ParallelTerminationStrategy: PID 11264 died... 20:30:05.336153 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11264): Terminated: ok {rc=0} 20:30:05.422125 bus /gobi_0: Setting Powered False 20:30:06.523888 bus /gobi_0: Setting Powered False 20:30:07.634263 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11262): Process ended prematurely: osmo-stp_10.42.42.5(pid=11262) [trial-2349↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11262)]