Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=11329): Process ended prematurely: osmo-stp_10.42.42.5(pid=11329) [trial-2349↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11329)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 20:30:55.431516 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:30:55.443572 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 20:30:55.593363 tst cs_paging_gprs_active.py: using LAC 16621 20:30:55.717828 tst cs_paging_gprs_active.py: using RAC 46 20:30:55.843912 tst cs_paging_gprs_active.py: using CellId 16621 20:30:55.965112 tst cs_paging_gprs_active.py: using BVCI 16622 20:30:55.988715 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:30:56.000119 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:30:56.011262 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:30:56.022791 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:30:56.034166 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:30:56.045504 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:30:56.056928 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:30:56.068262 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:30:56.079938 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 20:30:56.202107 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 20:30:56.487601 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:30:56.615089 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:30:56.931692 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11319): Launched 20:30:57.196680 run iperf3-srv_10.42.42.10(pid=11320): Launched 20:30:57.382615 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:30:57.509638 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:30:57.827991 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11321): Launched 20:30:58.092714 run iperf3-srv_10.42.42.10(pid=11322): Launched 20:30:58.279117 tst cs_paging_gprs_active.py:38: start network... 20:30:58.406828 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:30:58.890014 run create_hlr_db(pid=11323): Launched 20:30:59.066899 bus /gobi_6: Setting Powered False 20:31:00.086980 run create_hlr_db(pid=11323): Terminated: ok {rc=0} 20:31:00.493617 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11325): Launched 20:31:00.800478 run osmo-hlr_10.42.42.2(pid=11326): Launched 20:31:01.011349 run osmo-stp_10.42.42.5: Starting osmo-stp 20:31:01.722746 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11328): Launched 20:31:02.251286 run osmo-stp_10.42.42.5(pid=11329): Launched 20:31:02.397338 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:31:02.973820 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11331): Launched 20:31:03.091244 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:31:03.378812 run patchelf(pid=11332): Launched 20:31:03.571230 run osmo-stp_10.42.42.5(pid=11329): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11329)] 20:31:03.712438 run osmo-stp_10.42.42.5(pid=11329): stdout: | (launched: 2022-12-08_20:31:01.895289) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:31:03.852796 run osmo-stp_10.42.42.5(pid=11329): stderr: | �[0;m�[38;5;43m20221208203102201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208203102201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208203102202 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208203102203 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208203102203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208203102203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208203102203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:31:03.989030 run osmo-stp_10.42.42.5(pid=11329): stdout: | (launched: 2022-12-08_20:31:01.895289) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:31:04.124036 run osmo-stp_10.42.42.5(pid=11329): stderr: | �[0;m�[38;5;43m20221208203102201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208203102201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208203102202 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208203102203 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208203102203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208203102203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208203102203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:31:04.281143 run patchelf(pid=11332): Terminating (SIGINT) 20:31:04.465269 run patchelf(pid=11332): Terminated: ok {rc=0} 20:31:04.498811 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11329): Process ended prematurely: osmo-stp_10.42.42.5(pid=11329) [trial-2349↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11329)] [trial-2349↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 20:31:04.508719 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 20:31:04.572466 run osmo-hlr_10.42.42.2(pid=11326): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11326)] 20:31:04.624622 run osmo-hlr_10.42.42.2(pid=11326): stdout: | (launched: 2022-12-08_20:31:00.649357) 20:31:04.677770 run osmo-hlr_10.42.42.2(pid=11326): stderr: | �[0;m�[1;31m20221208203100822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208203100822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208203100822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208203100822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208203100822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208203100823 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208203100846 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208203100867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208203100868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208203100868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:31:04.722923 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11319): Terminating (SIGTERM) 20:31:04.765338 run iperf3-srv_10.42.42.10(pid=11320): Terminating (SIGTERM) 20:31:04.808256 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11321): Terminating (SIGTERM) 20:31:04.850735 run iperf3-srv_10.42.42.10(pid=11322): Terminating (SIGTERM) 20:31:04.893309 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11325): Terminating (SIGTERM) 20:31:04.935679 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11328): Terminating (SIGTERM) 20:31:04.978159 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11331): Terminating (SIGTERM) 20:31:04.987981 --- ParallelTerminationStrategy: PID 11319 died... 20:31:05.044931 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11319): Terminated: ok {rc=0} 20:31:05.055168 --- ParallelTerminationStrategy: PID 11320 died... 20:31:05.111591 run iperf3-srv_10.42.42.10(pid=11320): Terminated {rc=256} 20:31:05.121815 --- ParallelTerminationStrategy: PID 11321 died... 20:31:05.178450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11321): Terminated: ok {rc=0} 20:31:05.188575 --- ParallelTerminationStrategy: PID 11322 died... 20:31:05.245079 run iperf3-srv_10.42.42.10(pid=11322): Terminated {rc=256} 20:31:05.255227 --- ParallelTerminationStrategy: PID 11325 died... 20:31:05.311787 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11325): Terminated: ok {rc=0} 20:31:05.322062 --- ParallelTerminationStrategy: PID 11328 died... 20:31:05.378219 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11328): Terminated: ok {rc=0} 20:31:05.388373 --- ParallelTerminationStrategy: PID 11331 died... 20:31:05.444574 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11331): Terminated: ok {rc=0} 20:31:05.533304 bus /gobi_0: Setting Powered False 20:31:06.642699 bus /gobi_0: Setting Powered False 20:31:07.752671 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11329): Process ended prematurely: osmo-stp_10.42.42.5(pid=11329) [trial-2349↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11329)]