Failed
dynts:sysmo+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_sysmo+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=18413): Process ended prematurely: osmo-stp_10.42.42.5(pid=18413) [trial-2350↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18413)]
Standard Output
---------------------------------------------- trial-2350 dynts:sysmo+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 21:54:26.233487 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 21:54:26.244611 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 21:54:26.396350 tst switch_tch_pdch.py: using LAC 16995 21:54:26.523403 tst switch_tch_pdch.py: using RAC 165 21:54:26.645319 tst switch_tch_pdch.py: using CellId 16995 21:54:26.765793 tst switch_tch_pdch.py: using BVCI 16996 21:54:26.788766 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 21:54:26.799742 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 21:54:26.810833 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 21:54:26.822242 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 21:54:26.833652 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 21:54:26.844831 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 21:54:26.856229 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 21:54:26.867655 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 21:54:26.988158 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 21:54:27.263068 tst switch_tch_pdch.py:51: start network... 21:54:27.388406 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:54:27.842846 run create_hlr_db(pid=18407): Launched 21:54:27.965665 bus /gobi_6: Setting Powered False 21:54:29.038241 run create_hlr_db(pid=18407): Terminated: ok {rc=0} 21:54:29.439271 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18409): Launched 21:54:29.761213 run osmo-hlr_10.42.42.2(pid=18410): Launched 21:54:29.877768 run osmo-stp_10.42.42.5: Starting osmo-stp 21:54:30.373233 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18412): Launched 21:54:30.672805 run osmo-stp_10.42.42.5(pid=18413): Launched 21:54:30.782159 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:54:31.350548 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18415): Launched 21:54:31.470136 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:54:31.774429 run patchelf(pid=18416): Launched 21:54:31.968901 run osmo-stp_10.42.42.5(pid=18413): ERR: Terminated: ERROR {rc=1} [trial-2350↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18413)] 21:54:32.111327 run osmo-stp_10.42.42.5(pid=18413): stdout: | (launched: 2022-12-08_21:54:30.525321) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:54:32.251894 run osmo-stp_10.42.42.5(pid=18413): stderr: | �[0;m�[38;5;43m20221208215430697 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208215430697 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208215430697 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208215430698 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208215430698 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208215430698 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208215430698 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:54:32.386685 run osmo-stp_10.42.42.5(pid=18413): stdout: | (launched: 2022-12-08_21:54:30.525321) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:54:32.520071 run osmo-stp_10.42.42.5(pid=18413): stderr: | �[0;m�[38;5;43m20221208215430697 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208215430697 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208215430697 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208215430698 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208215430698 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208215430698 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208215430698 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:54:32.674735 run patchelf(pid=18416): Terminating (SIGINT) 21:54:32.855422 run patchelf(pid=18416): Terminated: ok {rc=0} 21:54:32.888127 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=18413): Process ended prematurely: osmo-stp_10.42.42.5(pid=18413) [trial-2350↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18413)] [trial-2350↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 21:54:32.897686 tst switch_tch_pdch.py:54: Test FAILED (6.7 sec) 21:54:32.962852 run osmo-hlr_10.42.42.2(pid=18410): ERR: Terminated: ERROR {rc=237} [trial-2350↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18410)] 21:54:33.015822 run osmo-hlr_10.42.42.2(pid=18410): stdout: | (launched: 2022-12-08_21:54:29.603297) 21:54:33.069314 run osmo-hlr_10.42.42.2(pid=18410): stderr: | �[0;m�[1;31m20221208215429802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208215429802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208215429802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208215429802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208215429802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208215429803 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208215429818 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/dynts:sysmo+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208215429828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208215429829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208215429829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:54:33.115086 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18409): Terminating (SIGTERM) 21:54:33.158492 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18412): Terminating (SIGTERM) 21:54:33.201975 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18415): Terminating (SIGTERM) 21:54:33.212276 --- ParallelTerminationStrategy: PID 18409 died... 21:54:33.270934 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18409): Terminated: ok {rc=0} 21:54:33.281565 --- ParallelTerminationStrategy: PID 18412 died... 21:54:33.339783 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18412): Terminated: ok {rc=0} 21:54:33.350215 --- ParallelTerminationStrategy: PID 18415 died... 21:54:33.408219 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18415): Terminated: ok {rc=0} 21:54:33.495946 bus /gobi_0: Setting Powered False 21:54:34.604522 bus /gobi_0: Setting Powered False 21:54:35.714497 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18413): Process ended prematurely: osmo-stp_10.42.42.5(pid=18413) [trial-2350↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18413)]