Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=24925): Process ended prematurely: osmo-stp_10.42.42.5(pid=24925) [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24925)]
Standard Output
---------------------------------------------- trial-2350 gprs:nanobts+band-900+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 22:56:52.621511 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:52.633166 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:56:52.788055 tst ping_idle_ping.py: using LAC 17327 22:56:52.907438 tst ping_idle_ping.py: using RAC 242 22:56:53.028088 tst ping_idle_ping.py: using CellId 17327 22:56:53.147657 tst ping_idle_ping.py: using BVCI 17328 22:56:53.170715 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:53.181632 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:53.192399 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:53.203417 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:53.214315 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:53.225260 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:53.236178 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:53.247195 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:56:53.537387 tst ping_idle_ping.py:24: start network... 22:56:53.671419 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:56:54.187421 run create_hlr_db(pid=24919): Launched 22:56:54.374414 bus /gobi_6: Setting Powered False 22:56:55.396332 run create_hlr_db(pid=24919): Terminated: ok {rc=0} 22:56:55.801391 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24921): Launched 22:56:56.102905 run osmo-hlr_10.42.42.2(pid=24922): Launched 22:56:56.222464 run osmo-stp_10.42.42.5: Starting osmo-stp 22:56:56.750055 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24924): Launched 22:56:57.050759 run osmo-stp_10.42.42.5(pid=24925): Launched 22:56:57.160705 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:56:57.687634 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24927): Launched 22:56:57.795856 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:56:58.061319 run patchelf(pid=24928): Launched 22:56:58.239223 run osmo-stp_10.42.42.5(pid=24925): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24925)] 22:56:58.369469 run osmo-stp_10.42.42.5(pid=24925): stdout: | (launched: 2022-12-08_22:56:56.902429) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:56:58.500019 run osmo-stp_10.42.42.5(pid=24925): stderr: | �[0;m�[38;5;43m20221208225657071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225657071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225657072 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225657072 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225657074 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225657075 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225657075 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:56:58.625766 run osmo-stp_10.42.42.5(pid=24925): stdout: | (launched: 2022-12-08_22:56:56.902429) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:56:58.750531 run osmo-stp_10.42.42.5(pid=24925): stderr: | �[0;m�[38;5;43m20221208225657071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225657071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225657072 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225657072 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225657074 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225657075 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225657075 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:56:58.895388 run patchelf(pid=24928): Terminating (SIGINT) 22:56:59.066401 run patchelf(pid=24928): Terminated: ok {rc=0} 22:56:59.097548 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=24925): Process ended prematurely: osmo-stp_10.42.42.5(pid=24925) [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24925)] [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 22:56:59.106321 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 22:56:59.168381 run osmo-hlr_10.42.42.2(pid=24922): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24922)] 22:56:59.219022 run osmo-hlr_10.42.42.2(pid=24922): stdout: | (launched: 2022-12-08_22:56:55.954062) 22:56:59.269922 run osmo-hlr_10.42.42.2(pid=24922): stderr: | �[0;m�[1;31m20221208225656128 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208225656129 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208225656129 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208225656129 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208225656129 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208225656129 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208225656141 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:nanobts+band-900+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208225656150 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208225656150 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208225656150 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:56:59.313569 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24921): Terminating (SIGTERM) 22:56:59.354857 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24924): Terminating (SIGTERM) 22:56:59.396092 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24927): Terminating (SIGTERM) 22:56:59.406021 --- ParallelTerminationStrategy: PID 24921 died... 22:56:59.461080 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24921): Terminated: ok {rc=0} 22:56:59.471406 --- ParallelTerminationStrategy: PID 24924 died... 22:56:59.526419 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24924): Terminated: ok {rc=0} 22:56:59.536744 --- ParallelTerminationStrategy: PID 24927 died... 22:56:59.591575 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24927): Terminated: ok {rc=0} 22:56:59.676245 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24925): Process ended prematurely: osmo-stp_10.42.42.5(pid=24925) [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24925)]